1 / 26

Intel Platform- Calpella I ntroduction

Intel Platform- Calpella I ntroduction. Chini Yang 21 .Sep. 2010. Agenda. C al pella Platform Block Diagram. CPU (Clarksfield/Arrandale) & PCH(Ibex Peak -M) & EC(IT8570E ) Features Introduc e Briefly. N71Ja Power On Sequence Illuminate for Detail. Common Bugs Analyze on N71Ja/Jq.

malise
Télécharger la présentation

Intel Platform- Calpella I ntroduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Intel Platform-CalpellaIntroduction Chini Yang 21 .Sep. 2010

  2. Agenda • Calpella Platform Block Diagram. • CPU(Clarksfield/Arrandale) & PCH(Ibex Peak-M) & EC(IT8570E) Features Introduce Briefly. • N71Ja Power On Sequence Illuminate for Detail. • Common Bugs Analyze on N71Ja/Jq. • Q & A.

  3. CalpellaPlatform • Calpella vs. Montevina

  4. Calpella Platform

  5. Calpella Platform

  6. Calpella-N71Ja Block Diagram

  7. Calpella CPU • Clarksfield(C) vs. Arrandale(A)

  8. Calpella CPU

  9. Calpella PCH

  10. Calpella CLK

  11. An Important Component Platform Needed - EC • Keyboard matrix/Touchpad control • Power/Charger… etc, LEDs instruct • Fan tachometer control • Power management (sleep/hibernate/wake up/Lid switch) • Power sequence control with PCH • Battery charger/Cell capacity/Temperature monitor • GPIO control PS: If the system cannot power on, we can snatch LPC_FRAME# to make known that whether EC has worked.

  12. Power Sequence Provision - ACPI Power State • G0/S0:Full on • G1/S1:CPU sleep ----PCH has the option toassert the CPUSLP# signal to further reduce processor power consumption. • G1/S3:Suspend to RAM ----The system context is maintained in system DRAM,but power is shut off tonon-critical circuits. Memory is retained, and refreshescontinue. All clocks stop except RTC clock. • G1/S4:Suspend to Disk ----The context of the systemismaintained on the disk. Allpower is then shut off to the system except for the logic required to resume. • G2/S5:Soft off ----System context is not maintained. All power is shut off exceptfor the logic required to restart. Afull boot is required when waking. • G3:Mechanical off ----Power failure Because the system does not have any power.

  13. Power Sequence Types on Notebook • Five types of power sequence • G3S5 • S5S0 (Power on) • S0S5 (Power down) • S3S0 • S0S3

  14. Power on---AC/DC Block Flow • Difference: • AC mode (plug in adaptor): G3S4/S5 , • have VSUS power. (to save power) • DC mode (only plug in battery): G3S4/S5 , • have no VSUS power.

  15. Power on---AC Sequence CPU 2.A/D_DOCK_IN MB39A132 18.H_CPUPWRGD 19.PLT_RST# 20.H_CPU_RST# 4.+3VA 3.AC_BAT_SYS PCH RT8206AGQW 16.VRM_PWRGD 5.VSUS_ON RTC BAT 6.+3VSUS/+5VSUS 1.RTCRST# 17.PM_PWROK 12.PM_SUSB# 11.PM_SUSC# 8.PM_RSMRST# 10.PWRBTN# 9.PWR_SW# EC ITE8570 7.VSUS_GD 4.AC_OK=1 13.SUSC_ON MEMORY POWER(+1.8V,0.9V) 14.SUSB_ON OTHER MAIN POWER(+1.5V,+1.05V etc.) Vcore Controller 16.VRM_PWRGD 15.CPU_VRON (110ms)

  16. Power on---DC Sequence CPU 2.BAT_CON MB39A132 18.H_CPUPWRGD 19.PLT_RST# 20.H_CPU_RST# 4.+3VA 3.AC_BAT_SYS PCH RT8206AGQW 16.VRM_PWRGD 6.VSUS_ON RTC BAT 7.+3VSUS/+5VSUS 1.RTCRST# 17.PM_PWROK 12.PM_SUSB# 11.PM_SUSC# 9.PM_RSMRST# 10.PWRBTN# 5.PWR_SW# EC ITE8570 8.VSUS_GD 4.AC_OK=1 13.SUSC_ON MEMORY POWER(+1.8V,0.9V) 14.SUSB_ON OTHER MAIN POWER(+1.5V,+1.05V etc.) Vcore Controller 16.VRM_PWRGD 15.CPU_VRON (110ms)

  17. N71Ja Power on Sequence(1)

  18. N71Ja Power on Sequence(2)

  19. N71Ja Power on Sequence(3)

  20. N71Ja Power on Sequence(4)

  21. N71Ja Power on Sequence(5)

  22. Power Down---General Sequence

  23. Power Down---General Sequence • Power down---General Sequence

  24. Common Bugs • 1.The system can not be powered on, and the adaptor LED indication flicker. Here is somewhere short, check all power rails whether have been short to GND. • 2.The system can not be powered on, and power LED not lighten. Maybe The BIOS ROM content has been wrecked. +3VA powered? Why not VSUS power? Power IC or MOSFET or Diode burnout? • 3.The power LED lighten, but the system can not bring up to DOS. plug in debug card, view the 80 post code, for example: 80 code no motion, show 00 –> CPU not work –>measure power sequence black screen, show d0~d5 –> memory plug failed or memory broken black screen, show F0~F2 –> one DIMM slot failed show 38 –> check USB port and USB device If not mount LPC debug & New card debug card because of cost down, try to flash BIOS by JIG board or measure sequence. • 4.The system often show blue screen suddenly in OS un-install drives (even enter safe mode), find whether a device driver installed wrongly cause it un-plug device to check BIOS updated? Care for BIOS release note check FAN status/thermal module –> over temperature? and so on……

  25. RMATraining Request • How to judging the CPU’s function when it on board? • Debug Card -> Reset -> Power, CLK ->Visual Inspection (Impurities, PIN Broken, curving, Error Component ) • Do not boot up, How to do? • Check Debug code • Debug code:00 -> Reset , Power, CLK , Visual Inspection. • Debug code: OK -> GPU, CRT/LVDS • The Voltage and CLK is OK, but no display. How to do? • Remove all Device, Check DIMM, Flash EEPROM, Reset COMST, Check all reset nets, Check Debug code. • Blue screen, Hung up, How to do? • Remove all Device, Check DIMM, Flash EEPROM, Change HDD , Check FAN & Thermal Module, Check Windows error code. • The Difference with EC ChipITE8510、8511、8752 、8512 、8502 、8570. • ITE8510、8511 -> SantaRosa platform -> ISA ROM • ITE8752、8512 -> Montevina platform -> SPI ROM • ITE8570 -> Calpella platform -> SPI ROM

  26. THE END THANKS

More Related