1 / 17

HTS Solenoid Punch: Team Supercool

HTS Solenoid Punch: Team Supercool. The Story So Far. http://www.mundogym.com.ar/Secciones/Deportes/fotos/boxeo/box-punch.jpg. The Story So Far. Used HTS tape to make a punch Selected radius of solenoid based on measurements Designed and built apparatus Wrapped HTS tape

mare
Télécharger la présentation

HTS Solenoid Punch: Team Supercool

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HTS Solenoid Punch:Team Supercool

  2. The Story So Far http://www.mundogym.com.ar/Secciones/Deportes/fotos/boxeo/box-punch.jpg

  3. The Story So Far • Used HTS tape to make a punch • Selected radius of solenoid based on measurements • Designed and built apparatus • Wrapped HTS tape • Attempted to Connect Leads

  4. Apparatus Dimensions • 3” high with ¾” thick base • 5” O.D. with ½” thick walls • < 1 ¼” Inner diameter to slide PVC over • 15/16” Through hole for punch

  5. Critical Current

  6. Apparatus Construction

  7. Apparatus Construction

  8. HTS Tape Wrapping For a 2.5” diameter • 1.5 m tape 2” length • 60 m tape should be 80” • Our solenoid is 6” tall -> 13 layers

  9. Final Assembly

  10. The Outlet

  11. Tests • Inner magnetic field with Magnetometer • Critical Current • Self-Field limitations (voltmeter and Magnetometer) • Force • Compare to results from copper solenoid

  12. Immediate Goals • Use propane torch to solder power leads • Experiment with aspect ratio • Insulate with Kapton tape • Heat conduction calculations for Helium • Build final sized apparatus

  13. Connecting Power Leads

  14. Final Design • Flat disk of Al from original ingot • Two large diameter tubes attached to bottom disk • Lid

  15. Final Design

  16. Schedule

  17. Questions?

More Related