1 / 27

SolidWorks

SolidWorks. 1. Introduction (1) What is SolidWorks? A Design Automation Software Package Used to Produce Parts Assemblies Drawings. (From Planchard and Planchard 2003). (2) Starting Up Window: Start->Programs->SolidWorks 2007-> SolidWorks 2007. (3) References Online Help

mare
Télécharger la présentation

SolidWorks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SolidWorks • 1. Introduction • (1) What is SolidWorks? • A Design Automation Software Package Used to Produce • Parts • Assemblies • Drawings (From Planchard and Planchard 2003)

  2. (2) Starting Up Window:Start->Programs->SolidWorks 2007-> SolidWorks 2007

  3. (3) References • Online Help • Menu: Help->SolidWorks Help Topics • Online Tutorial • Menu: Help->SolidWorks Tutorial • Books: • D. C. Planchard and M. P. Planchard, SolidWorks 2007: The Basics, SDC Publications, 2007 • D. C. Planchard and M. P. Planchard, Engineering Design with SolidWorks 2007, SDC Publications, 2007 • D. C. Planchard and M. P. Planchard, Engineering Design with SolidWorks 2003, SDC Publications, 2003

  4. (4) SolidWorks Model Types e.g., Base.sldprt Base-Rod.sldasm Base.slddrw

  5. 2. Part Modeling (1) Setting Up Unit Menu: Tools->Options

  6. – Hole + Block Top Plane (2) 3-D Object Creation Procedure By Creating Features • Each Feature: • 2-D Sketching • 3-D Formation

  7. (3) 2-D Sketching • Parametric Modeling • (a) Procedure • Sketch the geometry • Dimension the geometry • Modify the dimension values • e.g., 0.42 1.43 1 1 0.35 1 1.51 1

  8. (b) 2-D Object Creation Methods Menu: Tools->Sketch Entities 3 Point Arc Line Tangent Arc Centerpoint Arc Point Rectangle Spline Circle

  9. (c) Additional 2-D Object Creation Methods Menu: Tools->Sketch Tools Chamfer Fillet Mirror Trim Offset Entities Extend

  10. Angular Radial Linear (d) DimensioningMenu: Tools->Dimensions->Smart (e) RelationsMenu: Tools->Relations Collinear Perpendicular Vertical Horizontal

  11. Midpoint Coincident Tangent Parallel Equal Coradial Concentric Symmetric

  12. (4) Features Menu: Insert->Boss/Bass Extruded Boss/Base Revolved Boss/Base Menu: Insert->Cut Revolved Cut Extruded Cut

  13. Menu: Insert->Boss/Bass Sweep Boss/Base Lofted Boss/Base Menu: Insert->Features Fillet Chamfer

  14. Menu: Insert->Pattern/Mirror Linear Pattern Circular Pattern Mirror

  15. Z Y X (5) Reference Geometry Menu: Insert->Reference Geometry Axis Coordinate System Plane e.g., A reference plane for creating a sketch of revolved cut feature

  16. (6) Viewing Menu: View->Display Hidden Lines Removed Shaded With Edges Hidden Lines Visible Wireframe Menu: View->Modify Rotate Pan Zoom to Fit

  17. 3. Assembly Modeling • Loading the Components • Menu: Insert->Component • ->Existing Part/Assembly

  18. (2) Defining Mates Menu: Insert->Mate

  19. (3) Exploded View Menu: Insert->Exploded View

  20. 4. Drawing Modeling 2-D Drawing of a Part or an Assembly (From Planchard and Planchard 2003)

  21. (1) Drawing Template and Drawing Format • Orientation • Landscape • Portrait • Size • A • B • A4 • A3 • ... ... (From Planchard and Planchard 2003) Menu: File->New->Draw

  22. (2) Creating Views • Menu: Insert->Drawing View • Standard 3 View Top View Right View Front View

  23. Model View Model View Orientation

  24. Derived Drawing Views Projected View Auxiliary View Detail View Crop View Broken-Out Section Section View

  25. (3) Dimensions Menu: Tools->Options Select Styles of Font, Leader, Precision, Tolerance, Arrow, etc. Two Ways to Create Dimensions (i) Display All Dimensions and Then Modify These Dimensions Menu: Insert->Model Items (ii) Create Required Dimensions Manually Menu: Tools->Dimensions

  26. (4) Annotations Menu: Insert->Annotations 1 3 x 25 ABC Datum Feature Symbol Balloon Note Surface Finish Symbol Geometric Tolerance Center Mark

  27. (5) Bill of Materials Menu: Insert->Tables->Bill of Materials

More Related