Electrolysis setup

Oct 29, 2019

50 likes | 54 Vues

Electrolysis setup. Test tubes. Water tank. Battery eliminator. Cables and clips. Foil electrodes. Immerse test tube under water, and tilt so that it fills with water: remove air bubbles. Insert electrode, and invert. Keep the mouth below water level, and the tube stays filled with water.

markmrichard

Télécharger la présentation

Electrolysis setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

Electrolysis setup
Test tubes Water tank Battery eliminator Cables and clips Foil electrodes
Immerse test tube under water, and tilt so that it fills with water: remove air bubbles. Insert electrode, and invert. Keep the mouth below water level, and the tube stays filled with water. tape
Repeat for second electrode.
When all is ready, power on. It may take a few minutes before gas bubbles are visible.