1 / 15

A Guide to Using Jumper Cables

The battery is one of the most important power sources in any vehicle. Without it, you wouldn’t be able to listen to the radio or use the air conditioning, let alone start your car! Luckily even though the battery plays such an important role, it is one of the easiest things to fix.

mattheyautomotive123
Télécharger la présentation

A Guide to Using Jumper Cables

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Jumper Cables A Guide to Using The battery is one of the most important power sources in any vehicle. Without it, you wouldn’t be able to listen to the radio or use the air conditioning, let alone start your car! And luckily, it is almost as easy to bring back to life as it is to drain.

  2. Common Ways to Kill a Battery: leaving your keys in the ignition not closing the doors all the way leaving a light on for an extended period of time. Before jumping to conclusions though, let’s make sure it is in fact the battery that’s the problem.

  3. Signs of a Different Problem: • all electronic • components work • but car won’t start • Engine turns over normally, but car • won’t start • lights turn on and off • while car is on Signs of a Dead Battery: Engine cranks slowly or not at all Lights won’t turn on Battery is 3-4 years old Smells like sulfur clicking noise when you turn the key

  4. If it’s determined that your battery is dead, the easiest way to revive it is by jump-starting it. Make sure you have everything you need: Jumper cables Gloves Safety glasses car with a working battery

  5. Preparation Turn off all electrical components, unplug any chargers and turn both cars off. Before you start, park both cars facing each other with only a foot or two between their bumpers. Now roll your sleeves up and let’s get started…

  6. Locate the battery in each car and inspect both of them. If you see anything leaking call a tow truck and have it replaced. Figuring Out the Battery • You will notice the batteries have both a positive and a negative terminal

  7. Figuring Out the Cables The negative (-) clamps will be black and the positive (+) clamps should be red Jumper cables are usually marked with colors or stripes to help keep track of each side.

  8. Matching and Attaching Take one of the positive ends of the jumper cables and clamp it on to the positive terminal on the dead battery. Attach the other end of the positive cable to the positive terminal on the active battery.

  9. Matching and Attaching Take one of the negative ends of the jumper cables and clamp it to the negative terminal of the active battery. *Now you need to start being careful as the cables are live and full of electricity!!

  10. Look for protruding metal somewhere on the engine block of the disabled car. As long as it isn’t painted or oily, attach the unused, negative clamp here. • Some people are tempted to attach this last cable to the negative terminal on the dead battery but that runs the risk of acid coming off the battery and possibly even igniting.

  11. Charging it Up You can also rev the engine if you want, but for no more than a minute. Turn on the engine of the good car and let it to run for a couple minutes. • This is what charges up the dead battery in the other car and is absolutely necessary.

  12. Start Your Engines! Let the dead battery charge a little bit longer before trying to start it again. You can also try taking off the last clamp and then moving the other ones around slightly. Turn the key in the ignition of the dead car. Sometimes it takes a couple tries but if it gets to be the fourth or fifth attempt, stop. • Worst case scenario, you will have to get your car towed and replace the battery.

  13. Taking the Cables Off Once you successfully recharge the battery and turn your car on, you can remove all the jumper cables, but take them off in the opposite order that you put them on. Don’t let the cables touch each other or the engine during this process.

  14. Congratulations! If you aren’t planning on driving, keep the jumped car running for at least a half hour so it has time to recharge. You just successfully jump-started your car! • I know you’re proud of yourself, but just remember if you have to jump start your car more than three times a week it is officially old and it’s time to replace it.

  15. If you go through all of this successfully but your car fails to start up again your battery could be completely dead or you have a dying alternator. • Either way, don’t hesitate to bring your car in to one of our mechanics as soon as possible! (856) 854-2507 – 100 W Crescent Blvd Collingswood, NJ 08108

More Related