1 / 6

Grid space coating-updates 05/01/2012

Grid space coating-updates 05/01/2012. Anil Mane and Jeffrey Elam. Objective. Build a 8”x8” frugal tile MCPs based detector. Internal parts needed for a 8”x8” tile. Main internal parts: a) Two 8”x8” MCPs b) Two 2mm grid spacers c) One 4.45mm grid spacer. What we have for 8”x8” tile?.

mbullen
Télécharger la présentation

Grid space coating-updates 05/01/2012

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Grid space coating-updates05/01/2012 Anil Mane and Jeffrey Elam

  2. Objective Build a 8”x8” frugal tile MCPs based detector Internal parts needed for a 8”x8” tile Main internal parts: a) Two 8”x8” MCPs b) Two 2mm grid spacers c) One 4.45mm grid spacer

  3. What we have for 8”x8” tile? • Both MCP1 (8M) and MCP2 (10M) tested @ UCB and shows stable resistance

  4. Photograph of Grid spacers: Note: Many thanks to Dean and his team for NiCr electrode deposition GS 4.45mm GS 2mm

  5. Grid spacers I-V data: • If needed we will make another set of grid spaces

  6. Plan for demountable: • Baking of all the demountable internal parts in vacuum @ 150C. • Baking of top plate in new oven @ 100C. • Assemble in clean room @ ALD lab (ready). • Testing demountable at APS. Good luck to LAPD group!!

More Related