Tips for Furnace Maintenance and Repair: When it is all about the important things within the winter season, the repair and maintenance of the furnace comes at the top list. People think that the furnace repair is one of the most daunting tasks, but there is nothing to be panic about as there are a larger number of furnace installation heating and air conditioning in Shawnee which offers its maintenance and repair. But if you want to save some money then here are some tips that you should follow for the Amana furnace repair in Kansas City. 1.Change the furnace filter: It is the furnace filter which is playing a bigger role and so, after the larger usage, it becomes dirty and clogged up. The dirty furnace is going to offer poor heating and cooling in Shawnee which is bad quality air not good for health. So, it is recommended to change the air filter after every three months. 2.Look out the burner flames: The burner flame must be burning blue and smoothly. If you find your flame to be yellow then it is the indication of dirty burner but it can also be the sign of carbon monoxide. So, at this point you must call the Shawnee heating and cooling professionals to get rid of carbon monoxide. 3.Vacuum burners: Turn off the furnace system along with gas supply and after that, remove all the dust that is present within or near the burner surface. 4.Clean blower: The blower blades must be cleaned with a small brush and vacuum and you should be careful as not to disturb its wiring or counterweights. 5.Dust pilot and the hot surface igniter: It is suggested to use the drinking straw in order to remove all the dust that has been built up over the pilot. Be careful as not to touch hot surface igniter as it can cause burns.