1 / 16

Combo Interface Module

Combo Interface Module. Preliminary. Customer Problems. STI-MV Presents Too High An Entry Cost Into Digital Integration. Low Initial STI-MV Channel Utilization. PM May Not Have Empty IOP Slot for STI-MV. Safety Issues

megan-hinton
Télécharger la présentation

Combo Interface Module

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Combo Interface Module Preliminary

  2. Customer Problems • STI-MV Presents Too High An Entry Cost Into Digital Integration. • Low Initial STI-MV Channel Utilization. • PM May Not Have Empty IOP Slot for STI-MV. • Safety Issues • Routing All DE Transmitters to 1 STI-MV Enables a Single IOP Failure to Impact Multiple Areas. • Increased Design Complexity • Plant Designers Typically Do Not Layout Equipment Based on Transmitter Communication Protocols. • Interlocks and Redundancy Increase Complexity.

  3. Combo Interface Module • The Combo Interface Module(CIM) enables a TPS xPM STI-MV IOP module to accept any mix* of analog 4-20ma or bi-directional DE inputs from field instruments on a per channel basis. * must not violate existing FTA boundary restriction

  4. Input Types • The CIM accepts on any of the 16 input channels . . . • 4 byte DE (single or multivariable) • 6 byte DE (single or multivariable) • Analog 4-20ma (1-5volts) HART

  5. Customer Problems - solved • Low Initial STI-MV Channel Utilization. • PM May Not Have Empty IOP Slot for STI-MV. • Routing All DE Transmitters to 1 STI-MV Enables a Single IOP Failure to Impact Multiple Areas. • Plant Designers Typically Do Not Layout and Locate Equipment Based on Transmitter Communication Protocols. • Interlocks and Redundancy Increase Complexity.

  6. Analog, HART, DE Analog, DE DE FTA CIM STI-MV Analog HART DE Installation • The CIM is installed between the FTA IOP connector and the IOP cable, mounting directly on the FTA’s IOP cable connector. • In redundant applications, two CIMs are required.

  7. Combo Interface Module • The Combo Interface Module is ideal for both MRO and new installations, eliminating the need for two IOP module types (analog & DE), enabling digital integration and higher channel densities while utilizing less card slots and FTAs.

  8. Operation • The CIM always presents 16 channels of DE data to the STI-MV IOP module, either directly from a DE field instrument or internally generated from the CIM's internal A/D converter.

  9. Per Channel Signal Selection FTA SMV DE (open) (open) (open) ST HART Rosemount ST DE STT DE Rosemount Rosemount SLT DE (open) ST Analog SMV DE (open) (open) (1) PV1 = DP (2) PV2 = AP (3) PV3 = Temp (4) PV4 = Flow (5) 4-20ma (6) 4-20ma (7) PV1 = DP (8) PV1 = Temp (09) 4-20ma (10) 4-20ma (11) PV1 = Level 1 (12) PV2 = Level 2 (13) 4-20ma (14) PV1 = DP (15) PV2 = AP (16) PV3 = Temp FTA

  10. Signal Flow All-Digital(DE) Analog, HART, DE Analog, DE DE FTA CIM STI-MV Analog Analog Analog 4 byte uni-directional DE Analog(Smartline) Analog(HART) DE 4 or 6 byte bi-directional DE 4 or 6 byte bi-directional DE DE HART

  11. Redundancy Analog, HART, DE Analog, DE DE FTA CIM STI-MV(primary) Analog Analog Analog(Smartline) Analog(HART) CIM STI-MV(backup) DE 4 or 6 byte bi-directional DE DE HART

  12. Compatibility • The CIM module is release independent and does NOT require any system modification. • Compatible with all single or multivariable DE, and HART field instruments. • No impact or disturbances from communicator usage on HART or DE channels.

  13. Compatible FTAs & IOPs

  14. Features • Accepts Analog or Bi-Directional DE on Any Channel*. • Compatible With Any STI-MV and Most FTAs. • Simple to Install & Configure. • Analog-to-DE Transmitter Mode Change from TPS. • No Wiring or Software Changes. * must not violate existing FTA boundary restriction

  15. HLAI STI-MV STI-MV CIM FTA FTA FTA Upgrade Scenario • Exchange HLAI for STI-MV. • Configure CIM channel jumpers. • Install CIM(s). • Change Smartline Transmitters to DE mode.

  16. Value • Enables Higher Channel Utilization and IOP Card Density • Release Independent • No Field Wiring Changes • Lowest Migration Cost to Digital Operation

More Related