1 / 10

Detailed Design Review: Cockpit Assembly Team

Detailed Design Review: Cockpit Assembly Team. Victor Calamaro Nick Flanagan Rashaud Harvey Danielle Painter. February 24, 2012. Overview. Instrumentation Instrumentation Mounting Feedback Feedback Mounting Visual Display Visual Display Mounting Bill of Materials

megara
Télécharger la présentation

Detailed Design Review: Cockpit Assembly Team

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Detailed Design Review:Cockpit Assembly Team Victor Calamaro Nick Flanagan Rashaud Harvey Danielle Painter February 24, 2012

  2. Overview • Instrumentation • Instrumentation Mounting • Feedback • Feedback Mounting • Visual Display • Visual Display Mounting • Bill of Materials • Schedule for MSD II

  3. Instrumentation • Sensor: LVDT • Location: On cables in the center console • Cost: $0 - Provided by MOOG • Requires: Signal Conditioner Note: Selected Instrumentation for Throttle, Rudder Pedals, Yoke Translation, and Yoke Rotation

  4. Instrumentation: Mounting Plate • Location: Front of center console • Material: Aluminum • Connection: Bolts • How it Works: • LVDT bolted onto plate • LVDT stabilized with loop clamps

  5. Feedback • Source: Springs • Mount Location: On cables in the center console • Additional Needs: • Cable Clamps • Cost: $41.81 Note: Selected Feedback Source for Throttle, Rudder Pedals, Yoke Translation, and Yoke Rotation

  6. Feedback: Mounting • Location: Back of center console • Connection: To the existing plate • How it Works: • One end of spring connected to the existing plate • Other end connected to cables with cable clamps

  7. Visual Display • Source: PLYE 15” In-Wall Mount Flat Panel Monitor • Location: On dash • Cost: $322.12 • Includes: VGA & RCA Input, Remote

  8. Visual Display: Mounting • Location: Front of plane – where existing dash was • Connection: Bolted to existing structure

  9. Bill of Materials

  10. Schedule For MSD II

More Related