1 / 14

CAFS On-Line Orientation Montgomery County Fire & Rescue Service

CAFS On-Line Orientation Montgomery County Fire & Rescue Service. Class A Foam Theory. Class A Foam Theory. Foam Terminology. General Terms Foam Concentrate Foam Concentrate Injection Rate (Proportioning Rate) Foam Solution Finished Foam Foam Types. Practical Foam Terminology.

mguilford
Télécharger la présentation

CAFS On-Line Orientation Montgomery County Fire & Rescue Service

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CAFS On-Line Orientation Montgomery County Fire & Rescue Service Class A Foam Theory

  2. Class A Foam Theory  MCFRTA 2008

  3. Foam Terminology • General Terms • Foam Concentrate • Foam Concentrate Injection Rate (Proportioning Rate) • Foam Solution • Finished Foam • Foam Types

  4. Practical Foam Terminology Foam Concentrate (As Purchased From The Manufacturer) + Water = Foam Solution + Air & Mechanical Agitation = Finished Foam (Air Aspirated Foam Solution)  MCFRTA 2008

  5. Foam Terminology • Mixing & Finishing - where is the air added and where does the agitation occur? • At Nozzle = Nozzle Aspirated Foam System (NAFS) • At Pump = Compressed Air Foam System (CAFS)  MCFRTA 2008

  6. Foam Types Foams are typed by the fires they are designed to put out. • Class A Fires need Class A Foam • Class B Fires need Class B Foam For CAFS MCFRS will be using Class A Foam only. You will learn about Class B foam later; for now we will concentrate on Class A foam.  MCFRTA 2008

  7. Ingredients: • Foaming Agent (Creates Bubble Structure) • Wetting Agent or Surfactant (Decreases Surface Tension of Water) • Emulsifying Agent (Breaks down Molecules containing Carbon (example - Charred wood) “oleophillic” Class A Foams

  8. Class A Foams have different proportioning rates depending upon the application the agent is being used for : • Normal Range - 0.1% (one-tenth of 1 percent) up to 1.0% • This means that using a 0.5% (five-tenths of 1 percent) Class A foam concentrate proportioning rate will use 5 gallons of concentrate for every 995 gallons of water. • Nozzle Aspirated Foam • 0.3% - low expansion, 1.0% high expansion • Compressed Air Foam • 0.3% - “Wet”, 1.0% - “Dry” Class A Foams

  9. How do I Make CAFS • There are a variety of ways to power the components, but all CAFS systems have three basic systems which must work together.  MCFRTA 2008

  10. CAFS Triangle These are the components that work together to make CAFS. Air Compressor Foam Pump Water Pump  MCFRTA 2008

  11. Advantages of CAFS • Increased penetration (high energy) • Increased “soaking” ability • Clings to vertical surfaces • Lighter hose lines More efficiently uses water  MCFRTA 2008

  12. Wet vs. Dry • Refers to proportion of air to water • The more air, the dryer it is • Can also be affected by “richness” of foam mixture • If you add more foam concentrate, the finished foam will be dryer. At full dryness, the foam concentrate proportion automatically gets kicked up to 1%.  MCFRTA 2008

  13. Wet to Dry - Controlled by amount of air “Wet” “Fluid” “Dry” The more air - the “dryer” the foam  MCFRTA 2008

  14. Review Questions List what the following ingredients of Class A Foam do and explain why they help us put out Class A fires: Surfactants Emulsifiers Foaming Agents List the three parts of the CAFS triangle: List the components of finished foam: How does CAFS differ from NAFS?  MCFRTA 2008

More Related