1 / 7

Radio Telescope Basics

Radio Telescope Basics. Three Basic Questions: What do Radio Telescopes do? How do Radio Telescopes work? How are Radio Telescopes similar or dissimilar to Optical Telescopes?. What do Radio Telescopes Do?. They “gather” Radio waves just like optical Telescopes “gather” light!

michaela
Télécharger la présentation

Radio Telescope Basics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RadioTelescopeBasics Three Basic Questions: What do Radio Telescopes do? How do Radio Telescopes work? How are Radio Telescopes similar or dissimilar to Optical Telescopes?

  2. What do Radio Telescopes Do? • They “gather” Radio waves just like optical Telescopes “gather” light! • Concentrate radio waves that fall on the telescope “dish” • Bounce (reflect) waves from the dish to a radio receiver • Concentrating the waves gives information with more definition and resolution

  3. How do Radio Telescopes work? press down arrow to view animation Press up arrow to reset animation Some radio telescopes work like this Other radio telescopes work like this

  4. Once you get the raw signal from the antenna… Learn more

  5. A few details:Receiver and Amplifier • Receivers use cooled HFET (Heterostructure Field-Effect Transistors) • These are very Low-noise input amplifiers. • HFET Receivers are reliable and stable. They have an entire octave of bandwidth without unnecessary noise. What’s more, they’re cooled to keep the signal to noise ratio high.

  6. Why are receivers cooled? • Cooling a receiver: • Reduces Thermal Noise. The electronics in the telescope emit radio waves themselves. Cooled electronics emit much less radiation, much less “noise”. • By reducing noise, the weak signal will be elevated in relative strength • The coolant used is typically either liquid Nitrogen or liquid Helium.

  7. LEARN MORE • Visit this site and research several radio telescopes. For each telescope, answer the following questions: • Where is it? • What organization runs it? • What is the telescope’s diameter (in meters) • What wavelengths / frequencies does the telescope detect. • For what investigations is the telescope being used? • Name one fun fact about the telescope

More Related