1 / 4

Amateur Radio Technician Class Element 2 Course Presentation

Amateur Radio Technician Class Element 2 Course Presentation. ELEMENT 2 SUBELEMENTS T1 - FCC Rules, station license responsibilities T2 - Control operator duties T3 - Operating practices T4 - Radio and electronic fundamentals T5 - Station setup and operation

milica
Télécharger la présentation

Amateur Radio Technician Class Element 2 Course Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Amateur Radio Technician ClassElement 2Course Presentation • ELEMENT 2 SUBELEMENTS • T1 - FCC Rules, station license responsibilities • T2 - Control operator duties • T3 - Operating practices • T4 - Radio and electronic fundamentals • T5 - Station setup and operation • T6 - Communications modes and methods • T7 - Special operations • T8 - Emergency and Public Service Communications • T9 - Radio waves, propagation, and antennas • T0 - Electrical and RF Safety

  2. SUBELEMENT T6 - Communications modes and methods[3 exam questions – 3 groups] T6A – [1 exam question] • Modulation modes, descriptions and bandwidth (AM, FM, SSB) • Phone transmissions are voice transmissions by radio. • Single sideband (SSB) is a form of amplitude modulation. • A gateway is a name given to an amateur radio station that is used to connect other amateur stations to the Internet. • Single sideband (SSB) voice modulation is most often used for long distance and weak signal contacts on the VHF and UHF bands. • Frequency Modulation (FM) is most commonly used for VHF and UHF voice repeaters. • The emission type, CW, has the narrowest bandwidth. • Upper sideband is normally used for VHF and UHF SSB communications. • The primary advantage of single sideband over FM for voice transmissions is that SSB signals use much less bandwidth than FM signals. • The approximate bandwidth of a single-sideband voice signal is between 2 and 3 kHz. • The approximate bandwidth of a frequency-modulated voice signal is between 5 and 15 kHz. • The normal bandwidth required for a conventional fast-scan TV transmission using combined video and audio on the 70-centimeter band is about 6 MHz.

  3. SUBELEMENT T6 - Communications modes and methods[3 exam questions – 3 groups] T6B – [1 exam question] • Voice communications, EchoLink and IRLP • Information is transmitted between stations via the Internet using Echolink. • Internet Radio Linking Project (IRLP) • Any licensed amateur radio operator may operate on the Echolink system. • Echolink and IRLP have in common Voice over Internet protocol technology. • Voice over Internet protocol is the method used to transfer data by IRLP. • IRLP is a method of linking between two or more amateur stations using the Internet. • EchoLink allows computer-to-radio linking for voice transmission. • If you hear a brief tone and then a station from Russia calling CQ on a 2-meter repeater you are listening to an Internet linked DX station. • You might find a list of active nodes using VoIP in a repeater directory or the Internet. • When using a portable transceiver you select a specific IRLP node by using the keypad to transmit the IRLP node numbers.

  4. SUBELEMENT T6 - Communications modes and methods[3 exam questions – 3 groups] T6C – [1 exam question] • Non-voice communications - image communications, data, CW, packet, PSK31, Morse code techniques, Q signals • Packet Radio is an example of a digital communications method. • Automatic Position Reporting System (APRS) • A global positioning system receiver is required along with your normal radio for sending automatic location reports. • A standard fast scan color television signal transmission is indicated by the term NTSC. • Point-to-point digital message forwarding emission mode may be used by a Technician class operator in the 219 - 220 MHz frequency range. • Phase Shift Keying (PSK) • PSK31 is a low-rate data transmission mode that works well in noisy conditions. • Any sending speed at which you can reliably receive is recommended when using Morse code. • A practical reason for being able to copy CW when using repeaters is to recognize a repeater ID sent in Morse code. • QRM is the "Q" signal used to indicate that you are receiving interference from other stations. • QSY is the "Q" signal used to indicate that you are changing frequency.

More Related