1 / 11

Temperature-Dependent Transient Capacitance in InGaAs/InP-based Diodes

Temperature-Dependent Transient Capacitance in InGaAs/InP-based Diodes. Kiril Simov and Tim Gfroerer Davidson College Mark Wanlass NREL Supported by the American Chemical Society – Petroleum Research Fund. Thermal Radiation. Blackbody Radiation. Photovoltaic Cell. Heat Source.

mliss
Télécharger la présentation

Temperature-Dependent Transient Capacitance in InGaAs/InP-based Diodes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Temperature-Dependent Transient Capacitance in InGaAs/InP-based Diodes Kiril Simov and Tim Gfroerer Davidson College Mark Wanlass NREL Supported by the American Chemical Society – Petroleum Research Fund

  2. Thermal Radiation Blackbody Radiation Photovoltaic Cell Heat Source Blackbody Radiator Motivation: Thermophotovoltaics

  3. Oxford 77K Experimental Setup Computer with LabVIEW (5) Digital Scope(Tektronix) (1) Capacitance meter (Boonton) (2) (4) Temp Controller (3) Pulse Generator Agilent Cryostat with sample

  4. - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + With Bias Depletion Layer P-N Junction Depletion Layer with Bias Depletion Layer P N

  5. Typical Capture Data –Dependence on Pulse Length

  6. Capture Analysis Capture cross-section Holes: s = 2.5 x 10-20 cm2 Electrons: s = 7.5 x 10-21 cm2

  7. Number of Traps ~ 7 x 1015 cm-3

  8. D Typical Escape data – Dependence on Temperature

  9. Escape Analysis ~ trap depth

  10. Conclusions • A deep level has been detected • The effective trap cross-section is ~10-20 cm2 • The trap concentration is ~ 1016 cm-3 • The depth of the level is ~ 0.30 eV • Our results are consistent with sub-bandgap PL from similar structures. • Web links: This talk: http://webphysics.davidson.edu/faculty/thg/talks-posters/MAR-04.ppt PL poster: http://webphysics.davidson.edu/faculty/thg/talks-posters/SESAPS-03.ppt

  11. Device Structure p+ layer junction n layer

More Related