1 / 14

BPM Hardware

BPM Hardware. Vince Pavlicek CD/ESE. Review the data processing architecture presented by Jim. Present the constraints we put on our search for candidate hardware. Present the search process and the current status. Outline the next steps. Hardware Outline.

morela
Télécharger la présentation

BPM Hardware

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BPM Hardware Vince Pavlicek CD/ESE

  2. Review the data processing architecture presented by Jim. Present the constraints we put on our search for candidate hardware. Present the search process and the current status. Outline the next steps. Hardware Outline

  3. Architecture Block Diagram, Data Path Sensor Addt’l Data Process’n Down Convter & Filter Anti-alias Pre filter A2D 12/14b Memory

  4. The candidate hardware should be able to implement the chosen data processing architecture. We did not want to start from scratch with a new design. Therefore, we looked at current examples of BPM DA hardware. The BLM will not affect this selection as it will be independent of the BPM raw data path. Initial Constraints

  5. Recycler and NUMI Echotek boards MI damper boards E-Cool DSR boards BNL RHIC BPMs Commercially available Analog to Digital Converter and Digital Signal Receiver boards. Initial Hardware Field

  6. Add modified Echotek with output FIFO replaced by dual-port RAM. Echotek2 Add DSR board with faster DDC with new data buffers and DSP with larger memory. DSR2 Added Candidates

  7. M&S

  8. We have several spreadsheets to help us understand the costs and effort involved with each candidate. Description, engineering, software and M&S were already shown. Summary to First Crate Fabrication Summary to Full system More Spreadsheets

  9. The Modified Echotek board is the candidate we will focus on and within the following steps we will pick a point to begin production. We verify proton/antiproton processing with a representative module. We need to understand how we will trigger the boards in all the modes and how we will generate those signals. We need to understand calibration. What’s Next

More Related