1 / 34

Intro to circuits

Intro to circuits. Moving from water to actual electrons. Review of Concepts - Current. Current is the amount of charge passing a point in the circuit in a certain length of time. Current is measured in Amperes (A). Symbol for charge is q Symbol for current is I. So, I = Δ q/ Δ t

nat
Télécharger la présentation

Intro to circuits

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Intro to circuits Moving from water to actual electrons

  2. Review of Concepts - Current • Current is the amount of charge passing a point in the circuit in a certain length of time. Current is measured in Amperes (A). • Symbol for charge is q • Symbol for current is I. • So, I = Δq/Δt • Note: this is NOT the same as the number of electrons passing by per unit time

  3. Competition problem #1 • Okay, we need 4 volunteers…

  4. Review of Concepts - Voltage • Voltage is the pull on the charge as it moves around the circuit. • The unfortunately named Electromotive Force (EMF) is equivalent to voltage. • It was thought at one point that there is a ‘force’ that pushes the current around the circuit. This ‘force’ is actually a voltage, not a force.

  5. A note on batteries • In a circuit diagram, the symbol for a battery is this: + - The ‘+’ means the positive terminal and the ‘-’ means the negative terminal.

  6. Standard Convention for circuits • K, so here’s the deal: • We all know that it is electrons (i.e. negative things) that flow in the circuit. • However, by convention, we talk about current flowing FROM the positive terminal TOWARDS the negative. Just go with it. + -

  7. Resistance (is futile) • Resistance is the difficulty current has in flowing through a component in a circuit • Resistance is measured in Ohms and the symbol is Ω. • The symbol for a resistor in a circuit looks like this:

  8. Quick Side Note: Resistivity • Resistivity is the how much resistance there is per unit length of a conductor. • 2 basic concepts: • The longer the conductor, the greater the resistance • The skinnier the conductor, the greater the resistance. • So a short thick copper wire has a lower resistance than a long skinny copper wire

  9. Simple DC circuit • DC means “direct current”. I will explain what this means later.

  10. And now let’s have one of you come up and explain what we just learned. • Don’t everyone jump up at once.

  11. Now that you have heard it in your own words… • It’s time for the quiz board.

  12. Ohm’s Law (the most important equation for electricity ‘n’ stuff) • Ohm’s Law: Voltage = Current X resistance • Or, more succinctly, V = IR • Really simple example: • You have a 3V battery pushing a current of 0.4A through a certain resistance. What is the resistance? • R = V/I = 3/0.4 = 7.5 ohms

  13. Voltage drop across a resistor • Remember the water lab and the upright tubes with the water in them? • The analog of water pressure was resistance. • Recall what happened when you went across resistors: the water pressure dropped. • The analog in a real circuit is that the voltage drops when current goes across a resistor.

  14. Voltage drop across a resistor 2 • So whenever you have a resistor in a circuit, voltage drops across it according to ohm’s law. • Vdrop = IR • Voltage will drop across every resistor in a circuit until there are no more resistors

  15. Equivalent resistance • One can find the equivalent resistance of the circuit by adding all the individual resistances together. • Two resistors of 6 ohms and 3 ohms have an equivalent resistance of 9 ohms. • This only works for a series circuit

  16. Series Circuit example • Consider the circuit: • Let’s say that the battery voltage = 12V • R1 = 1 ohm • R2 = 2 ohm • R3 = 3 ohm • What is the current in the circuit?

  17. Series Circuit example continued • What is the voltage drop in each resistor? • R1 = 1 ohm, I = 2A, so V = (1ohm)(2A) = 2 V • R2 = 2 ohm, I = 2A, so V = (2ohm)(2A) = 4 V • R3 = 3 ohm, I = 2A, so V = (3ohm)(2A) = 6 V • Notice that all the voltage drops add up to the original voltage of 12 V

  18. A check for understanding • Once again with the volunteers…

  19. Series vs. Parallel • A SERIES circuit is one with no branches. • All the elements are all lined up in a single sequence (hence, a series). • A PARALLEL circuit is one in which there are branches. • The current has a choice between two or more branches to take at some point in the circuit.

  20. Example Parallel Circuit • Examine a parallel circuit:

  21. Equivalent resistance in a parallel circuit • The equivalent resistance of a parallel circuit is given by: 1/Req = 1/R1 + 1/R2 + …

  22. Let’s look at an example • If R1 = 1 ohms and R2 = 2 ohms and R3 = 3 ohms, what is the equivalent resistance? • 1/Req = 1/1 + ½ + 1/3 • 1/Req = 6/6 + 3/6 + 2/6 = 11/6 • 1/Req = 11/6, so Req = 6/11 ohms

  23. Circuits partially in series and partially in parallel • Look at the circuit below. Oh, whatever shall we do to analyze it? • Start by grouping resistors together and finding the equivalent resistances. 110Ω 220Ω 24V 180Ω 250Ω

  24. Circuits partially in series and partially in parallel continued • So resolve the two in series on the right first. 110Ω 110Ω 220Ω 24V 24V 470Ω 180Ω 180Ω 250Ω

  25. Circuits partially in series and partially in parallel continued • Now resolve the two resistors in parallel on the right, etc. • What is the final equivalent resistance in the circuit? What is the total current coming out of the battery? 110Ω 110Ω 24V 470Ω 24V 180Ω 130Ω

  26. A check for understanding • Once again with the volunteers…

  27. Kirchoff’s Laws • There are two laws that will help you analyze complex circuits and determine currents and voltages: • Kirchoff’s Junction Law • Kirchoff’s Loop Law • Let’s look at these individually

  28. Kirchoff’s Junction Law • Kirchoff’s Junction law states that the sum of currents entering into a junction has to equal the sum of the currents leaving the junction. • Look at the examples below. What can we say about the currents in the branches? Branch B I = 8amps Branch A I = 7amps Branch B I = 2amps Branch A I = 6amps Branch C I = ? Branch D I = ? Branch C I = ?

  29. Kirchoff’s Loop Law • Kirchoff’s Loop law states that the sum of voltage increases and drops around a closed loop in a circuit equals zero. • We have seen a glimpse of this rule when we began analyzing circuits. • Remember this example? • Consider the circuit: • Let’s say that the battery voltage = 12V • R1 = 1 ohm • R2 = 2 ohm • R3 = 3 ohm • What is the current in the circuit?

  30. Kirchoff’s Loop Law • In that example, the sum of the voltage increases and decreases in the loop equaled zero. • Use this idea to find the voltage drop in the resistor in the bottom right corner: 5Ω 12V + - 15V + - 6Ω

  31. Kirchoff’s Loop Law • There are two voltage rises: 12 V and 15 V • There are two voltage drops: I*(5Ω) and I*(6Ω) • The total voltage around the circuit has to equal zero • So 12V + 15V – I(5Ω) – I (6Ω) = 0 • 27V – I (11 Ω) = 0 • I = 27/11 amps = 2.45 amps • Voltage drop across bottom right resistor: V = IR • So V = (2.45amps)(6 Ω) = 14.7 V

  32. Check for Understanding • Once again with the volunteers

  33. Electrical Power • Power is given as: Power = current * voltage • P = IV • But, V = IR, so also Power = I2R • Example: Let’s say you have a standard light bulb that has a resistance of 50 Ω. A current of 1.25 amps is going through the bulb. What is the power consumption?

  34. Measuring Current • When measuring current, you want ALL the current to go through the meter.

More Related