1 / 40

Optical Networks

Optical Networks. 2008. Topics. Optical Links Light Sources, Detectors and Receivers Optical Fiber Channel Optical Amplifiers Digital Optical Communications Time and Wavelength Multiplexing Optical Cross-Connects (OXC) Optical Networks First Generation Optical Networks and SONET

neona
Télécharger la présentation

Optical Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Optical Networks 2008

  2. Topics • Optical Links • Light Sources, Detectors and Receivers • Optical Fiber Channel • Optical Amplifiers • Digital Optical Communications • Time and Wavelength Multiplexing • Optical Cross-Connects (OXC) • Optical Networks • First Generation Optical Networks and SONET • Second Generation Optical Networks • Multi Protocol Lambda Switching • DWDM optoelectrical metro network

  3. Review of Optics • What is a monochromatic wave • Polarization of light • Interaction between Light and Matter Total Internal Reflection and Absorption • Diffraction • Interference

  4. Light Sources • LED -- Light emitter diodes • Laser diodes • Single mode laser diodes

  5. Detectors and Receivers • Solid state detectors • PIN diode • Circuit noise and signal to noise ratio in a receiver • Direct detection and bit error rate • Avalanche photodiodes (APD)

  6. Detectors and Receivers (cont.)

  7. Optical Fiber Channel (1) • Total internal reflection in a optical fiber • Telecommunications industry uses two windows: 1310 & 1550 nm • 1550 window is preferred for long-haul applications (Less attenuation, Wider window, Optical amplifiers)

  8. Optical Fiber Channel (2) • Multimode fibers and their limitations

  9. Optical Fiber Channel (3) • Single mode fibers and limitations • Non-linearities in fibers • Coupling light in a fiber and connecting two fibers

  10. Fiber Amplifiers erbium doped fiber amplifiers (EDFA)

  11. Semiconductor Optical Amplifiers (SOA)

  12. Topics • Optical Links • Light Sources, Detectors and Receivers • Optical Fiber Channel • Optical Amplifiers • Digital Optical Communications • Time and Wavelength Multiplexing • Optical Cross-Connects (OXC) • Optical Networks • First Generation Optical Networks and SONET • Second Generation Optical Networks • Multi Protocol Lambda Switching • DWDM optoelectrical metro network

  13. Digital Optical Communications • Signal Quantization / Coding: from analog to digital signal and vice versa • Digital Modulation: Amplitude, Phase, and Frequency Modulation • Multiplexing to increase the bandwidth of an optical channel • Time Division Multiplexing • Wave Division Multiplexing (WDM) • WDM vs. DWDM

  14. Digital Optical Communications (cont)

  15. DWDM 2.488 Gbps (1) 1310/1510 nm 2.488 Gbps (16) λ1 λ2 λ3 λ4 λ5 λ16 1530-1565 nm ramge 1310/1510 nm 16*2.488 Gbps = 40 Gbps 16 uncorrelated wavelengths 16 stabilized, correlated wavelengts

  16. Fiber Optics Transmission

  17. Input & Output fiber array Wavelength Dispersive Element 1-D MEMS Micro-mirror Array Input Fiber Output Fiber 1 Output Fiber 2 Digital MirrorControl Electronics 1011 Optical Switch • 1-input 2-outoput illustration with four wavelengths • 1-D MEMS (micro-electromechanical system) with dispersive optics • Dispersive element separates the ’s from inputs • MEMS independently switches each  • Dispersive element recombines the switched ’s into outputs

  18. All-opticalOXC DWDM Fibersin DWDM Fibersout DWDM Demux DWDM Demux DWDM Mux DWDM Mux All-Optical Switching • Optical Cross-Connects (OXC) • Wavelength Routing Switches (WRS) • route a channel from any I/P port to any O/P port • Natively switch s while they are still multiplexed • Eliminate redundant optical-electronic-optical conversions

  19. Optical Add-Drop Multiplexor (OADM) 1 1 2 OADM 2 3 ’3 3 ’3

  20. 3 3 2 2 WC 1 1 New request 1 3 New request 1 3 Wavelength () Converters (WC) • improve utilization of available wavelengths on links • needed at boundaries of different networks • all-optical WCs being developed • greatly reduce blocking probabilities No Wavelength converters With Wavelength converters

  21. Topics • Optical Links • Light Sources, Detectors and Receivers • Optical Fiber Channel • Optical Amplifiers • Digital Optical Communications • Time and Wavelength Multiplexing • Optical Cross-Connects (OXC) • Optical Networks • First Generation Optical Networks and SONET • Second Generation Optical Networks • Multi Protocol Lambda Switching • DWDM optoelectrical metro network

  22. Optical Networks • 1 st Generation: optical fibers substitute copper as physical layer • Submarine Systems • SONET (synchronous optical) in TDM • FDDI for LAN, Gbit Ethernet etc. • 2 nd Generation: optical switching and multiplexing/ WDM • broadcast-and-select networks • WDM rings • wavelength routing networks • 3 th Generation: optical packet switching???

  23. SONET SONET SONET SONET Data Center DWDM DWDM Metro Long Haul Metro Access Access Big Picture

  24. SONET • Encode bit streams into optical signals propagated over optical fiber • Uses Time Division Multiplexing (TDM) for carrying many signals of different capacities • A bit-way implementation providing end-to-end transport of bit streams • All clocks in the network are locked to a common master clock • Multiplexing done by byte interleaving

  25. Practical SONET Architecture ADM – Add-Drop Multiplexer DCS – Digital Crossconnect

  26. Protection Technique Classification • Restoration techniques can protect network against: • Link failures • Fiber-cables cuts and line devices failures • Equipment failures • OXCs, ADMs, electro-optical interface. • Protection can be implemented • In the optical channel sublayer (path protection) • In the optical multiplex sublayer (line protection) • Different protection techniques are used for • Ring networks • Mesh networks

  27. Path Switching: restoration is handled by the source and the destination. Line Switching: restoration is handled by the nodes adjacent to the failure. Span Protection: if additional fiber is available. Line Switching: restoration is handled by the nodes adjacent to the failure. Line Protection. Path Protection / Line Protection Normal Operation

  28. Shared Protection • Backup fibers are used for protection of multiple links • Assume independent failure and handle single failure. • The capacity reserved for protection is greatly reduced. Normal Operation 1:N Protection In Case of Failure

  29. Protection in Ring Network (Unidirectional Path Switched Ring) (Bidirectional Line Switched Ring) 1:1 Line Protection Used for interoffice rings 1+1 Path Protection Used in access rings for traffic aggregation into central office 1:1 Span and Line Protection Used in metropolitan or long- haul rings

  30. Working Path Backup Path Protection in Mesh Networks • Network planning and survivability design • Disjoint path idea: service working route and its backup route are topologically diverse. • Lightpaths of a logical topology can withstand physical link failures.

  31. Trend: IP over DWDM • IP is good for routing, traffic aggregation, resiliency • ATM for multi-service integration, QoS/signaling • SONET for traffic grooming, monitoring, protection • DWDM for capacity

  32. IP over DWDM: Why? • IP and DWDM => Winning combination • IP for route calculation, traffic aggregation, protection • DWDM => Cheap bandwidth • Avoid the cost of SONET/ATM equipmnt • IP routers at OC-192 (10 Gbps) => Don't need SONET multiplexing • Optical layer for route provisioning, protection, restoration • Coordinated restoration at optical/IP level • Coordinated path determination at optical/IP level

  33. MPS • MPS = Multi-Protocol Lambda Switching • MPLS + OXC • Combining MPLS traffic eng control with OXC • All packets with one label are sent on one wavelength • Next Hop Forwarding Label Entry (NHFLE) • <Input port,  > to <output port,  > mapping

  34. DWDM Summary • DWDM => Switching Bottleneck => O/O/O switches • High speed routers => IP directly over DWDM • Data and control plane separation => IP Control Plane • Data will be circuit switched in the core • IP needs to be extended to provide addressing, signaling, routing, and protection for lightpaths • High-speed point-to-point Ethernet => LAN-WAN convergence

  35. Why Optical Networks?DWDM optoelectricl metro network

More Related