1 / 8

RobotStudio Machine Tending PowerPac 5.09 Launch

RobotStudio Machine Tending PowerPac 5.09 Launch. Anna Liberg, Product Mgr Malin Rosqvist, Marketing Mgr. A challenge to sell robots. Do you meet any of following when choosing robot? Randomly pick an ABB robot, and hope it can fit the machine

nerice
Télécharger la présentation

RobotStudio Machine Tending PowerPac 5.09 Launch

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RobotStudio Machine Tending PowerPac 5.09Launch Anna Liberg, Product Mgr Malin Rosqvist, Marketing Mgr

  2. A challenge to sell robots • Do you meet any of following when choosing robot? • Randomly pick an ABB robot, and hope it can fit the machine • It is hard to decide the robot placement in the cell due to reachability • Can’t give a precise estimation of cycle time in design stage • Do you meet any of following when making a robot simulation? • Not having the right 3-D model • Spend precious time in teaching robot targets off-line • Difficult to make a simulation with two machines, and to animate them • It is actually a bit tricky to make a simulation… • …and it takes a lot of time

  3. The solution: RS MachineTending • RS Machine tending will show which robot can be used for a specific machine. • RS Machine tending will show how the robot should be placed. • The Analyser gives you extract time, cycle time and identifies bottle-necks in the cell. • A ready-to-use station library with machines and peripheral stations • Every station comes with a default path that can be modified. • You can use 2 machines in the same cell, and they are already animated. • Easy to use is the focus. The Cell wizard guides you to make the simulation. • You will make your first simulation in 30 minutes!

  4. What can RobotStudio MachineTending do for you? An easy-to-use simulation software for machine tending • Simulation time reduced from 8 to less than one 1 hour • Estimate cycle time • Reachability control - helps you choose the correct robot • Estimate cell foot print • Demonstrate capability of ABB 6-axis robots compared to linear robots • Show what post-processes the robot may achieve • Reduce project risk – common understanding between customer and integrator of the project goal RS Machine Tending shows what can be achieved with a 6-axis ABB robot!

  5. RS Machine Tending – High lights One robot can tend two machines in one cell Robot synchronized with machine opening/closing Parametric part, tool, fenceCan change size of part, tool or fence element easily Graphical statistics – the AnalyzerEasily identify the bottle neck of a production cycle

  6. An easy-to-use simulation tool for machine tending • No RobotStudio experience needed • Simulation done in less than one 1 hour • For ABB and ABB partners and customers • Target users: sales force, proposal & project engineers Fully integrated in RobotStudio, ABB’s simulation and offline programming software.

More Related