SlideServe
Menu
Préférences
© SlideServe · v2026

GMT Eta Distribution Study for Rate Estimation

neviah avatar
23 diapositives · 314 Views · Aug 26, 2014

Investigating the Eta distribution of GMT output to estimate GMT Rate in η. Analyzing data from runs, focusing on GMT subqualities, spikes in η, and rate effects on subregions. Conclusions on track efficiency and spikes causes.

GMT Eta Distribution Study for Rate Estimation - slide 1
01 / 23GMT Eta Distribution Study for Rate Estimation
1 / 17

Télécharger la présentation

GMT Eta Distribution Study for Rate Estimation
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. L1 Trigger Rate Study Nathaniel Amos

  2. GMT Eta Distribution • Studied Eta distribution of GMT output to estimate GMT Rate in η • Data sample taken from: • Runs: 190389-194115 • HLT_L1SingleMu12 and json_MuonPhys.txt • GMT Qualities selected: • GMT Quality 5: RPC Only • GMT Quality 6: DT or CSC, No RPC • GMT Quality 7: DT/RPC or CSC/RPC

  3. GMT Eta Distribution -Over 700 counts from each spike Spikes η

  4. What causes the spikes? • Observe each subsystem independently • All track matching done manually between GMT and subsystem • Define ∆R2=∆φ2 + Δη2 • Require ∆R < 0.05 • Take GMT-DT matches at GMT Quality 6, 7 • Take GMT-CSC matches at GMT Quality 6, 7 • If GMT η > 2.1, require CSCTF Mode 5 • Take RPC-GMT matches at GMT Quality 5, GMT BX = 0 • Plot each Eta distribution

  5. ∆R Distributions DT Overlap DT Only Most ∆R < 0.05 Most ∆R < 0.05 CSC Overlap CSC Only Most ∆R < 0.05 Many ∆R > 0.05?

  6. ∆R Distributions Already matched from DT, where ∆R<0.05. Remove these from CSC Overlap. NEW CSC Overlap without already matched DT tracks. Most ∆R < 0.05

  7. GMT-CSC Matches at 5 ≤ Quality ≤ 7 No large spikes observed at |η| = 1.0 η

  8. GMT-RPC Matches at Quality = 5 η

  9. GMT-DT Matches at 5 ≤ Quality ≤ 7 Spikes η

  10. GMT Relative Rates • Plot number of GMT-subsystem matches relative to total number of GMT matches • Partition η into regions: • DT, |η| < 0.9 • GMT Quality 6 and Quality 7 • CSC, 1.2 < |η| < 2.1 • GMT Quality 6 and Quality 7 • Also choose 1.2 < |η| < 2.0 (See next slides) • RPC, |η| < 1.6 • DT Overlap, 0.9 < |η| < 1.2 • CSC Overlap, 0.9 < |η| < 1.2

  11. Two Types of Plots • Plot GMT-subsystem matches divided by total number of GMT matches (“Relative Rates”) • Plot GMT-subsystem matches divided by total number of GMT matches per subsystem region width (a type of rate density) • Example: • CSC (1.2 < |η| < 2.1): each η bin has width of η = 0.1 • Therefore CSC Relative Rates divided by 18 bins

  12. Relative Rates, |η| < 2.1 60% of the GMT matches come from the CSCs.

  13. Relative Rates Per Region Width,|η| < 2.1 Spikes in overlap region from DT each come in a single bin (η = ±1.0) DT overlap region produces much greater contribution per bin.

  14. Relative Rates, |η| < 2.0 For |η|<2.0, CSCs contribute 20% of GMT tracks (outside overlap region). A lot of rate comes from extra η bin at ±2.1 (maybe from ME1/1 A station).

  15. Relative Rates Per Region Width, |η| < 2.0 Full region reduced from |η| < 2.1 to |η|< 2.0, CSCs contribute much less rate. DT Overlap’s spikes very apparent.

  16. Current Efficiency Efficiency about 96% at |η|=1.0

  17. Potential Efficiency: Ignore DT in Overlap Region Efficiency between 85% and 95% at η≈1.0. About 90% on average.

  18. Conclusions • Spikes do not come from CSC • But, a lot of rate at 2.0 <|η| < 2.1 • Some tracks may come from ME 1/1A • DT in overlap region causes spikes • Appears to be η = ±1.0 • If ignore DT in overlap region: • Efficiency drops from 96% to 90% • NOTE: Using only CSC, about 12% of tracks will be lowest CSCTF Quality • Rate consequences not fully understood • Maybe need GMT Emulator?

  19. Backup

  20. GMT-CSC Matches at Quality = 6 No large spikes observed at |η| = 1.0 η

  21. GMT-CSC Matches at Quality = 7 No large spikes observed at |η| = 1.0 η

  22. GMT-DT Matches at Quality = 6 Spikes η

  23. GMT-DT Matches at Quality = 7 η