1 / 4

Connecting to a Projector via Video Cable

Connecting to a Projector via Video Cable. Connecting to a Projector via Video Cable (1/2). Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote Point remote at projector & push the red Power button The projector will beep

nibal
Télécharger la présentation

Connecting to a Projector via Video Cable

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Connecting to a Projector via Video Cable

  2. Connecting to a Projector via Video Cable (1/2) • Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote • Point remote at projector & push the red Power button • The projector will beep • The status light on the projector will begin to flash green • The projector will display auto-setup on the screen • Wait for the projector to finish focusing before connecting the cable. (See next slide.) • Push the Comp1source button on projector remote • Locate the cable with the Video plug& Audio plug:

  3. Connecting to a Projector via Video Cable (2/2) Connect to Expansion Base ←or → directly to EliteBook 2740p Connect the Video connector to the monitor port Connect the Audio plug to the headphone or speaker jack HP Ultra-slim Expansion Base HP EliteBook 2740p direct connection As needed, hold Fn + press & release F4 to cycle through 4 output options: As needed, adjust the Tablet PC & ceiling speaker volume. Ceiling speaker remote control

  4. The End! • Still have a question? Contact the IT Department for further assistance: • E-mail: IT.Support@LFCDS.org • Call: x222

More Related