Certificate III in Carpentry

1. RTO: 41488 CPC30211 Certificate III in Carpentry This qualification provides you with trade skills to become a carpenter, subcontract/contract carpenter, covering work in residential and commercial applications. Occupational titles may include: • Carpenter • Carpenter and joiner. The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work. The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context. Who is the course for: CPC30211 Certificate III in Carpentry is for new and existing workers who are currently employed in a relevant position and wanting to work toward completing the qualification. Entry Requirements: There are no entry requirements for this qualification. Course duration: Duration is dependent on your knowledge, skills and experience levels. Learners who have a lot of relevant prior experience may have the ability to complete the qualification in a shorter timeframe. However, those who are new to the profession will often take a longer time frame to complete and will be supported by our team throughout their journey. To achieve a reasonable rate of progression and completion within the expected duration is 30 months; however, students can take up to 4 years to complete. The amount of training allocated for this qualification is based on the individual knowledge, skill and experience of each learner. Course cost: $15,000 Payment plan: 12 monthly payments per year of $1250 over 1 year Training methods: Delivery is through a combination of face to face, onsite training in a supervised workplace. Learners are also required to undertake self-paced learning. Note: (before entering a construction site, a student must hold a white card). Achievement of unit CPCCOHS1001A covers this requirement) Amount of Training: Each month and over the anticipated duration of the course, the following amount of training will occur: • In workplace under supervision: 150 hours • Trainer visit • Self-paced 3 hours 3 hours These hours are flexible according to the needs of the learner. Assessment: This course is delivered through on-site assessment where our assessors come and visit you on your job site. Some units of competency require written theory assessments as well. You will be assessed to show that you have achieved the skills and 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412

2. RTO: 41488 knowledge required. You will know in advance about the type of assessment and how it will operate. There is opportunity for reassessment and appeal, which can be found in the Student Handbook (refer website) Location: Onsite in the workplace and at RTO facilities for face to face classes. Outcome: Upon successful completion of this training product, you will be awarded a nationally recognised qualification in CPC30211 Certificate III in Carpentry. Student Information: Refer to our website for a copy of our student handbook for details of student obligations, and services provided - or contact our office for further details. Previous experience: What is a recognition assessment? Recognition assessment is a process that allows you to attain a nationally-recognised qualification or statement/s of attainment, based on skills and knowledge gained through previous experience, either formal training or informal (i.e. on the job) learning. This is called Recognition of Prior Learning (RPL). RPL cost: $300 administration fee, plus $150 per unit assessment fee. Gap fees for training are charged at $490 per unit Credit Transfer: Have you completed any of the below units? If so, Noble Training recognises all AQF qualifications and Statement of Attainments issued by other Registered Training Organisations. Please speak with your trainer about the RPL process prior to enrolment. Learning Support: We support many learning needs. Reasonable adjustments can be made to assist you in achieving a competent result where learning difficulties may be present. For students needing additional Language, Literacy and Numeracy support, we recommend Fruition Tuition – contact details are www.fruition.com.au, or contact no. 1300 884 846. All students will require following items: Personal protective equipment (PPE): • protective eyewear: Clear safety glasses, (tinted or sunglasses not acceptable). These must conform to the Australian Standard AS 1336 or 1337. • protective footwear – Safety Toe, Leather Upper, non-slip safety footwear must be worn. They must comply with AS2210 and be in good condition. • protective clothing – Sleeved, 100% cotton work wear or employer supplied uniform must be worn always. Note: Additional specialist protective clothing/Personal Protective Equipment may be required for certain activities. This will be identified by Safety Signage and instruction from your employer and/or trainer. Students failing to meet these minimum standards of dress will not be permitted. Material list: • nail bag, hammer and basic tools • 8 m tape measure • carpenters pencil • HB and 2H pencils 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412

3. RTO: 41488 • eraser • pens • A4 notebook • calculator (square root function required). 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412

4. RTO: 41488 Unit Code Unit Name CPCCCA2002B Use carpentry tools and equipment Handle carpentry materials CPCCCA2011A CPCCCA3001A Carry out general demolition of minor building structures CPCCCA3002A Carry out setting out CPCCCA3023A Carry out levelling operations CPCCCM1012A Work effectively and sustainably in the construction industry CPCCCM1013A Plan and organise work CPCCCM1014A Conduct workplace communication CPCCCM1015A Carry out measurements and calculations CPCCCM2001A Read and interpret plans and specifications CPCCCM2002A Carry out excavation CPCCCM2007B Use explosive power tools CPCCCM2008B Erect and dismantle restricted height scaffolding CPCCCM2010B Work safely at heights CPCCCO2013A Carry out concreting to simple forms CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry Install flooring systems CPCCCA3003A Construct wall frames CPCCCA3004A Construct ceiling frames CPCCCA3005B Erect roof trusses CPCCCA3006B Construct pitched roofs CPCCCA3007C Construct eaves CPCCCA3008B CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground CPCCCA3014A Construct bulkheads CPCCCA3015A Assemble partitions CPCCSF2004A Place and fix reinforcement materials BSBSMB301 Investigate micro business opportunities BSBSMB406 Manage small business finances RIIWHS202D Enter and work in confined spaces CPCCCA3018A Construct, erect and dismantle formwork for stairs and ramps NOBLE TRAINING GROUP 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412

5. RTO: 41488 SKILLS ASSESSMENT AND GAP TRAINING ENROLMENT FORM STUDENT NAME:_____________________________________________ COURSE SELECTED CPC30211 CERTIFICATE III IN CARPENTRY CPC31311 CERTIFICATE III IN WALL AND FLOOR TILING CPC31211 CERTIFICATE III IN WALL AND CEILING LINING For all information regarding skills assessment and gap training general construction program 17/18 Refer to www.csq.org.au. 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412

6. RTO: 41488 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412

7. RTO: 41488 CSQ STUDENT DECLARATION -I understand the csq program commences on 01/10/17 and finishes on the 30/09/18 -I understand that I am eligible for skills assessment and gap training against one eligible qualification per program period. -I consent to noble training releasing my personel information to csq for the purposes of administering the funding program. -I consent to csq contacting me for the purpose of but not limited to: a) a review and b) conducting destination surveys -I am aware that the SAGT general construction program consists of: a) funding for one(1) skills assessment and b) a minimum of two (2) and up to eight(8) units of competency of gap training. - - - To be eligible for the SAGTG program I understand that I must meet the following eligibility: 1.must be: a)an existing worker in the building and construction industry, and b)an eligible worker, or c)career seekers who hold previous experience in the building and construction industry, and 2.must be a) an Australian or new Zealand citizen, or b) a permanent resident of Australia, or c) a holder of e refugee or humanitarian visa, and 3. must a) permanently reside in queensland, or b) be permanently employed in queensland 4. must not be a) an employee of any authority, or b) an apprentice or trainee as defined in the further education and training act2014, or c) currently enrolled and participatingin a school program, or d)a contracted trainer and assessor or an existing worker of any rto, or e) already funded by an authority or other such source for delivery of the same training being undertaken as part of this program, or f)previously been funded under this program in the same program period I have attached copies of documentation required below to support my enrolment; One(1) of the following: -full birth certificate or birth certificate extract -passport -medicare card (green only), or 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412

8. RTO: 41488 -visa AND one (1) of the following: -queensland drivers licence -telephone account -bank statement -statement from real estate agent, or -any other formal documentation stating the participant’s full name and current residential address: And -evidence of employment status and occupation(e.g letter from employer). Letter from the employer must show the employer name, job title of Employee, length of service, details of duties being undertaken in the Building and Construction Industry. I declare that I have not previously been funded for------------------------------------------------------------------- ------- I acknowledge that this declaration is true and correct and understand that • • my enrolment into the program is subject to noble training assessing my eligibility for enrolment a That I may be eligible for up to $1000 for assessment and $6.75 per nominal hour to a maximum of 8 gap training competencies or 500 hundred nominal hours. noble training group is delivering its training and assessment to me on the basis of this. • Student signature:__________________________________________ date:___________________________ 2 Innovation Pkwy BIRTINYA QLD 4575 Email: info@nobletraining.com.au Phone: 0400846412