1 / 9

Quartus II & PLDT-2 Tutorial

Quartus II & PLDT-2 Tutorial. Switching and Logic Lab Standard Laboratory Exercises. Suggestions and Warnings. Read for detail and comprehension Should be able to complete within normal laboratory period.

nuwa
Télécharger la présentation

Quartus II & PLDT-2 Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Quartus II & PLDT-2 Tutorial Switching and Logic Lab Standard Laboratory Exercises

  2. Suggestions and Warnings • Read for detail and comprehension • Should be able to complete within normal laboratory period. • Make sure you program unused pins as tri-state inputs or you may burnout EPM7128S device on PLDT-2.

  3. Select Assign Device • Create Project using wizard first • Then for unused pins to be tri-state inputs

  4. Select Device & Pin Options

  5. Unused Pins – Input, Tri-State • Select Unused Pin Tab • Then Reserve all unused pin as inputs, tri-stated. • Finally select OK.

  6. Okay +5 VDC Pull-up Resistor EPM7128S At 5 VDC Output, Driving “1”

  7. Ouch– Output Driver Burns Out +5 VDC Output Burns Out • EPM7128S pulling up to +5VDC • Switch pulling down to ground EPM7128S Output, Driving “1” Switch Closed

  8. Okay– Output Driver Disabled +5 VDC Input Tri-State (Hi-Z) EPM7128S Switch Closed Input, Floating

  9. Okay– Output Driver Disabled +5 VDC Input Tri-State (Hi-Z) EPM7128S Switch Open Input, Floating

More Related