200 likes | 312 Vues
This detailed guide covers essential practices for electrical box installation, including screw requirements, cable sheathing visibility, and proper wire connection protocols. Understand abbreviations such as AFF and the significance of different screw colors, including silver, brass, and green, for connecting various wire types. Learn how to properly support cables, use eye hooks effectively, and perform quality cuts on EMT pipes. For anyone involved in electrical work, this resource provides practical insights to ensure safety and compliance with installation standards.
E N D
Light 1 Project Layout C 70” AFF
AFF is the abbreviation for • After first fire • Above finished floor • Above flat floor • At first floor • Average floor finish
Light 1 Project Layout C 70” AFF
C is the abbreviation for • Clear left • Center low • Clear line • Center line • Correct line
SUPPORTING your BOXES
How many screws are needed when installing a box • 4 • 3 • 5 • 2 • 1
The proper direction of an eyehook is • To the left and up • To the right and up • To the left and down • To the right and down • To the left then to the right
Staples shall be installed • 12 inches from a box and 3-1/2 feet thereafter • 8 inches from a box and 4-1/2 feet thereafter • 12 inches from a box and 4-1/2 feet thereafter • 10 inches from a box and 4 feet thereafter • 12 inches from a box and 4 feet thereafter
After you cut your pipe, you shall • Polish the pipe • Ream the pipe • Install the pipe • Measure the pipe • File the pipe
Connecting your Devices SILVER screws COLORS
SILVER terminal screws are for • Black wires • Green wires • Yellow wires • Red wires • White wires
Connecting your Devices BRASS screws COLORS
BRASS terminal screws are for • Black wires • Green wires • Yellow wires • Red wires • White wires
Sheathing in the Box Cable sheathing NM cable Lock-nut Box connector
How much sheathing shall be visible inside your box at the box connector • ¼ inch • ½ inch • 1/8 inch • ¾ inch • 5/8 inch
Connecting your Devices GREEN screws COLORS
GREEN terminal screws are for • Yellow wires • Green wires • Red wires • Bare wires • White wires