1 / 28

MDC update

MDC update. D.A. Petyt 9 th March 2005. This talk focuses on efforts to fit the ND mock data to determine the systematic beam/x-sec parameters that were inserted as part of the data challenge.

oma
Télécharger la présentation

MDC update

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MDC update D.A. Petyt 9th March 2005 • This talk focuses on efforts to fit the ND mock data to determine the systematic beam/x-sec parameters that were inserted as part of the data challenge. • The method employed uses the reweighting functions developed by Chris and Hugh that are encapsulated in the MCReweight package • Since the last meeting, the required truth variables for beam weighting have now been added to the standard CC analysis PAN. • In this particular study, I am looking at these beam systematic (BMPT) parameters for the first time. • So far, the study has only been conducted on ND events. The next step is to perform a combined ND/FD fit to extract the oscillation parameters while maintaining all correlations between the systematic parameters. This fit should be available by the time of the collaboration meeting.

  2. Data samples • PDF construction: • ~50 ND files (550 snarls/file) • 10 FD numu files + ~40 ‘NC’ nutau files • Event reweighting and parameter fitting: • ND: • 179 MC files – 78875 selected events (PID parameter>-0.2) • 88 Challenge set files • MC/Data ratio=2.05/1 • FD: • 19 MC files @ 6.5e20 pot – 34992 selected events (PID parameter>-0.4) • 1 Challenge set file @ 7.4e20 pot • MC/Data ratio=16.7/1

  3. ND MC/MDC matchup – before PID cut NB – MC statistical error is not negligible in these plots! MC MDC

  4. Event length distribution All MC events True CC events True NC events Challenge set c2=49.4/46

  5. ND MC/MDC matchup – after PID cut MC MDC

  6. Reco_enu distribution – after cuts All MC events True CC events True NC events Challenge set c2=36.2/30

  7. Fit method • The ND fit is performed on the 2D E_reco vs reconstructed_y distribution, where reco_y =reco_shw/reco_enu. The reco_y dimension is necessary to provide some discrimination between QEL, RES & DIS events. It is expected that the e_reco distribution will provide discrimination between BMPT beam systematic parameters. • A total of 51 bins of variable bin-size are employed in the fit (17 in e_reco and 3 in y) and a simple chisq is calculated between the observed and expected distributions. • The fit uses the ‘many loops’ (or ‘brute force’) method to find the chisq minimum. Numerous tricks have been employed to reduce the execution time to the absolute minimum (a 5 parameter fit currently takes ~30 mins on a single node on the FNAL Linux Cluster). Other techniques, such as the Marquardt fit advocated by Brian, might be necessary if the number of free parameters becomes too large (i.e. >8) QEL RES DIS

  8. BMPT parameterization

  9. Slide from Alysia’s talk at the last NC meeting… Parameter errors were determined from a fit to NA20/NA56(SPY) data

  10. Fit parameters and ranges * can be calculated outside of MCReweight

  11. E_reco vs reco_y distribution, challenge set 3 bins 17 bins

  12. Fractional difference between MC and challenge sets Low statistics bins

  13. MDC/MC matchup – nominal parameters c2=39.1/51 Match-up is pretty good – implies that FD fit with nominal beam/xsec parameters will be OK. ND fit is required to determine the allowed range of these parameters, however.

  14. Effect of ma_qel9% MDC/nominal MC Weighted MC/nominal MC

  15. Effect of ma_res9% MDC/nominal MC Weighted MC/nominal MC

  16. Effect of disfact9% MDC/nominal MC Weighted MC/nominal MC

  17. 2 parameter fit – ma_qel & ma_res 1d Dc2 projections Best fit x 90% CL Discrimination between ma_qel and ma_res is provided by y-distribution

  18. 3 parameter fit – adding disfact • Adding extra parameters will inflate the uncertainties on the systematic parameters due to correlations and/or degeneracies between the variables. • In this case, the size of the error contour in the ma_qel, ma_res chisq projection is significantly larger than the 2 parameter fit. • The best fit value of ma_qel remains the same, although the value of ma_res is higher by 3%. This is compensated by a 3% decrease in best-fit value of disfact from nominal (0.97 instead of 1.0) Best fit x 90% CL

  19. Effect of A_pi5% MDC/nominal MC Weighted MC/nominal MC

  20. Effect of B_pi25% MDC/nominal MC Weighted MC/nominal MC

  21. Effect of alpha_pi5% MDC/nominal MC Weighted MC/nominal MC Strong correlation between B_pi and alpha_pi expected in fits

  22. Effect of a_pi6% MDC/nominal MC Weighted MC/nominal MC

  23. 5 parameter fit – Adding Ap, Ak • Two additional parameters are introduced here – the values of A (the overall BMPT cross-section normalisation term) for pion and kaon parent hadrons respectively. • This effectively adds a normalisation term to the fit (although there is some mild shape dependence due to the differing spectra of neutrinos from pi/K parents) • The addition of these variables significantly increases the uncertainty on ma_qel,ma_res. 2 parameter fit 3 parameter fit 5 parameter fit

  24. Result of 5 parameter fit Parameters: ma_qel, ma_res, disfact, A_pi, A_k Nominal Best fit c2=37.88/46

  25. Fit uncertainties 90% CL Best fit: Ma_qel = 1.09 Ma_res = 1.03 disfact = 1.2 A_pi = 59.8 A_k = 7.58 Note anti-correlation between ma_qel,disfact and A_pi,A_k

  26. Do correlations/degeneracies matter? • At the last meeting I presented this plot which shows that there is complete degeneracy between ma_qel and ma_res if only the E_reco distribution is used in the ND fit. (This degeneracy is broken by fitting to y_reco). • What effect does getting the ‘wrong’ systematic parameters have on the FD fit? Does it actually matter that the input cross-section/beam parameters are not at the nominal values as long as the resulting energy distribution is the same? • As far as fitting to the correct values of dmsq and sin2theta is concerned, I think the answer (to first order) is no: • I tested this by fitting a FD dataset generated with nominal parameters with a MC set generated with ma_qel=1.15, ma_res=0.88. The fit produced a perfectly good chisq at the input values of dmsq and sin2theta. • It’s clear though that the size of the error contours will depend on how well the systematic parameters are determined and I think this is where their real importance lies. 68% CL 90% CL

  27. First look at FD challenge set All MC events True CC events True NC events Challenge set Distribution seems consistent with numu disappearance at a level that is expected for SK-like oscillation parameters…

  28. Next steps • Decide on a minimal set of x-sec/BMPT parameters and re-do ND-only fits with finer binning. • Proposal is to use: ma_qel, ma_res, disfact, A_pi, A_k, alpha_pi, a_pi. • Try fits with c2 constraints – how much do these restrict the allowed regions? • Try FD-only fit with best-fit systematic parameters from ND. • Attempt simultaneous ND/FD fit.

More Related