1 / 25

DC MOTORS

DC MOTORS . SEE 3433 ELECTRICAL MACHINES. DC MOTOR. - Shunt motors - Separately excited - Starter . DC MOTORS. +. -. +. -. DC MOTOR. DC motor. Load torque opposing the motor torque. + V a -. + V f -. +. -. +. -. T m. T load.

oshin
Télécharger la présentation

DC MOTORS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DC MOTORS SEE 3433 ELECTRICAL MACHINES

  2. DC MOTOR - Shunt motors - Separately excited - Starter

  3. DC MOTORS

  4. + - + - DC MOTOR DC motor

  5. Load torque opposing the motor torque + Va - + Vf - + - + - Tm Tload Mechanical Load: fans, blowers, Compressors, DC MOTOR DC motor

  6. + V - + V - + - + - Tm Tload F = mg DC MOTOR DC motor

  7. Hoist DC MOTOR

  8. - Some applications require the control the speed DC MOTOR - Some applications require the control the torque - In order to control the torque or speed we need to know the T- characteristics of the motor and the mechanical load Intersections between the two characteristics will determine the operating point

  9. If It + Vt  Rcf Ia Ra  Rcw Te Tload Mechanical load Shunt motor Vt = IaRa + Ea DC MOTOR It = Ia + If Ea = k Te = kIa k = Vt - IaRa

  10. Three possible methods of speed control: Field flux Armature voltage Vt Armature resistance Ra

  11. Varying Vt  TL Vt↓ Te Requires variable DC supply

  12. Varying Ra Ra↑  TL Te Simple control Losses in external resistor

  13. Varying  ↓  TL Te Not possible for PM motor Maximum torque capability reduces

  14. Armature voltage control Field flux control Te Maximum Torque capability  base Method of speed control in DC motor drives Armature voltage control : retain maximum torque capability Field flux control (i.e. flux reduced) : reduce maximum torque capability For wide range of speed control 0 to base  armature voltage, above base  field flux reduction

  15. Te Maximum Torque capability  base

  16. Pmax Constant torque Constant power  base P Te 0 to base  armature voltage, above base  field flux reduction P= EaIa,max = kaIa,max Pmax = EaIa,max = kabaseIa,max    1/

  17. 0 to base  armature voltage, above base  field flux reduction

  18. If It + Vt  Rcf Ia Ra Rcw 0 to base  armature voltage, above base  field flux reduction BUT there are problems !

  19. If It + Vt  Rcf Ia Ra Rcw 0 to base  armature voltage, above base  field flux reduction Controlling Vt will also affect If Controlling If via Rcf caused losses  I2R

  20. DC supply for armature DC supply for field 0 to base  armature voltage, above base  field flux reduction Separately Excited DC motor What if we have an AC supply ?

  21. 3-phase AC source Armature voltage control Field voltage control 0 to base  armature voltage, above base  field flux reduction Separately Excited DC motor AC to DC converter + Vdc - + Vdc - AC to DC converter

  22. Starter in DC Motor • At stand-still, w = 0  Ea = 0 Ra  Ia + Vt – eg, Vt = 100, Ra = 0.1  Ia = 1000 A !

  23. Starter in DC Motor • We can limit Ia at start-up by: 1) Controlling Vt using variable supply – e.g. using power electronics converter 2) Adding external resistor  known as starter Ra  Ia + Vt – + Ea – When Ea = 0 Rst • As speed builds up (so too Ea), Rst is gradually reduced

  24. Starter in DC Motor • As speed builds up (so too Ea), Rst is gradually reduced Ia Starter circuit 4 3 2 1 Imax Imin 1 2 3 4 t (s) speed t (s)

  25. Starter in DC Motor Practical Starter circuit

More Related