1 / 20

ALVIN the A lbuquerque L ab V IEW I nterest N etwork

ALVIN the A lbuquerque L ab V IEW I nterest N etwork. An Overview of Servo Motor System and LabVIEW. Presented by Larry Goga February 19th, 2009. The 3 rules for a good presentation!. Tell them what you’re going to tell them. Tell them what you want to tell them.

ostinmannual
Télécharger la présentation

ALVIN the A lbuquerque L ab V IEW I nterest N etwork

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ALVINthe Albuquerque LabVIEW Interest Network An Overview of Servo Motor System and LabVIEW Presented by Larry Goga February 19th, 2009

  2. The 3 rules for a good presentation! Tell them what you’re going to tell them. Tell them what you want to tell them. Tell them what you told them.

  3. My project Servo Systems in General National InstrumentsLabVIEW andNI Motion Yaskawa Electric Danaher Motion QuickSilver ControlsInc. Summary & Review Hardware and Software Demo’s Q&A Presentation Overview

  4. The PROJECT! • Process Camera • Not a normal 35mm film camera • Made by Photo-Sonics • Circa 1972, 37 years old • Used for special effectsphotography • Used for color separations • Used for animation • Had interchangeable motors

  5. Color Separations • Convert color to B&W • Take 3 images of the same frame • Synchronized with a color wheel in the lamphouse • Black and white film doesn’t fade • New and pristine color prints or negatives can be made in the future by reversing the process

  6. The InnerWorkings A mechanically adjustable shutterwith opening range of 0° to 170°

  7. The MOTOR(S) 3 different motors

  8. Run continuously from 1 fps to 24 fps Speed operator selectable Run in Stop Motion (1 frame) Run in Sep. Mode (3 frames) Run Forward & Reverse Selectable STOP (Shutter open or closed) Work with various user inter-faces (stand-alone, virtual or HMI) Generate output triggers Chase External Bi-Phase Brushless Motor Design Preferably American made Reasonably priced Work well in this application and ideally Be useable in other applications Most likely would be some sort of a Servo Motor and Controller System Specificationsfind a new motor and controller that would:

  9. What is a Servo System? • A closed-loop motion system using a current amplifier, servo controller, servomotor and a position feedback device such as an encoder to precisely control speed and position of a load. • The MOTOR can be electric, hydraulic, pneumatic or even internal combustion. • The FEEDBACK sensor can be mechanical or electronic, analog or digital and it can be rotary or linear.

  10. A Basic Servo System • A servo controller with external input • Motor connected to a feedback device • Is a closed loop system • How might this system work? What do we have here? http://www.baldor.com/pdf/manuals/1205-394.pdf The Feedback device can be Relative or Absolute.

  11. The PID Controller • Proportional-Integral-Derivative • Requires 3 adjustments - Kp, Ki and Kd • Requires TUNING • Can be made to learn how the system operates http://www.ecircuitcenter.com/Circuits/pid1/pid1.htm Studying the PID controller can be a semester long course in Mechatronics.

  12. A Complex PID Controller http://www.quicksilvercontrols.com/SP/TD/QCI-TD054_ServoTuning.pdf

  13. Selecting a Servo System • Hundreds of vendors X Hundreds of choices = Thousands of Options • Call your local NI Field Sales Engineer • Looked at Danaher Motion • Talked with Marc Christianson, NI Guru • Ruled out NI Motion • Suggested Yaskawa Electric

  14. NI MOTION • Hardware and Software • SoftMotion, Motion Assistant, PID Toolkit • PCI and PXI Hardware • Servo and Stepper Motor Controllers and Drives • Universal Motion Interfaces • Tutorials • Toolkits and Sample Code for LabVIEW Applications www.ni.com/motion

  15. Yaskawa Electric Hardware Sigma 5 http://www.yaskawa.com

  16. Yaskawa Electric Software Hardware, Software and LabVIEW Solution

  17. Pros LabVIEW Interface Good Software Brushless DC Motor Auto Tuning Feature Mass Moment of Inertia Calculation Good Support Cons Noisy Moderately Expensive Programmability Universality Support far away Latency Issues Yaskawa Review

  18. Back to the drawing board… Well, back to Danaher Motion anyway! Danaher is a Partner with National Instruments www.danahermotion.com Found ABQ representation in TMMI - Technical Marketing and Manufacturing Inc. http://www.tmmi.com/ Local Contact: Ernie Aragon

  19. http://www.quicksilvercontrols.com/ • Added an encoder to a Stepper Motor • Free design software • LabVIEW Interface • Example Programs • Broad line of motors and controllers • Local support

  20. REVIEW The project Servo systems in general, PID loop NI Motion Yaskawa Electric Danaher Motion QuickSilver Controls WHAT’S NEXT? Demonstrate QCI hardware Look at the QCI software Show a LabVIEW program running the camera Open for Q&A Review and look forward

More Related