1 / 25

BIO-MEMS DEVICES TO MONITOR NEURAL ELECTRICAL CIRCUITRY

BIO-MEMS DEVICES TO MONITOR NEURAL ELECTRICAL CIRCUITRY. Andres Huertas, Michele Panico, Shuming Zhang. ME 381 Final Project, Dec 4th, 2003. OUTLINE. Planar monitoring system Neurons cage array Living chips with peptide amphiphiles gels. ORIGINAL TECHNIQUE. Simple Rugged Easiest solution.

otooles
Télécharger la présentation

BIO-MEMS DEVICES TO MONITOR NEURAL ELECTRICAL CIRCUITRY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BIO-MEMS DEVICES TO MONITOR NEURAL ELECTRICAL CIRCUITRY Andres Huertas, Michele Panico, Shuming Zhang ME 381 Final Project, Dec 4th, 2003

  2. OUTLINE • Planar monitoring system • Neurons cage array • Living chips with peptide amphiphiles gels

  3. ORIGINAL TECHNIQUE • Simple • Rugged • Easiest solution “Future hybrid neuron-semiconductor chips will consist of complex neural networks that are directly interfaced to electronic integrated circuits. . . and may lead to novel computational facilities.” Jenker, Müller, Fromherz, Biol. Cybern. 84, 239-249 (2001)

  4. PACKAGED CHIPS

  5. MANUFACTURE • Very simple design • Scale is achievable

  6. DATA

  7. PROCESSES GROWTH

  8. PROBLEMS

  9. MANUFACTURE Polyimide Picket Fences. Günther Zeck and Peter, Fromherz, PNAS, 2001 vol. 98, no. 18, 10457-10462

  10. MANUFACTURE • Successful at immobilizing neurons • Retains Functionality

  11. DATA

  12. NEURO-CAGES FOR LIVE NEURAL NETWORKS STUDY To study neural networks of individual neurons is the aim of neuroscience Conventional technique: planar arrays of extracellular metal electrodes on which neural cultures are grown • Limitations: • Small proportion of neurons can be accessed • Neurons are mobile, thus repeated measurements of • a specific neuron are difficult Micro-cages: each neuron is trapped into one cage • Features: • Arrays of neuro-cages to allow the formation of neural networks • One-to-one correspondence between neurons and electrodes • Neurite growth is not affected by the physical confinement Qing He., Ellis Meng, Yu-Chong Tai, Christopher M. Jerome Pine, etc, The 12th International Conference on Solid-State Sensors, Boston, MA, Jun 8-12, 2003

  13. SILICON MICROMACHINED NEUROCHIPS Neurochip: 1 cm square, 500 µm thick silicon wafer, with a 4x4 array of wells spaced on 100 µm centers

  14. MICROFABRICATION PROCESS • Composite layer of 180 nm LPCVD silicon nitride • on top of 50 nm thermal oxide is formed • Pattern nitride-oxide layer to define the openings • for the metal electrodes • 1 µm oxide step around the electrode openings • Nitride is stripped • Metallization is done using lift-off process • Metallization is covered by a composite insulation • Layer of 0.5 µm LTO and 1 µmPECVD nitride • Opening of bonding pads and alignment marks • EDP etching on the back using the boron-doped • layer as an etch stop • RIE is used to form grillwork • Neuron wells are formed by EDP etching to the • electrodes on the front side of the wafer • Removal of pad oxide at the bottom of the wells

  15. EXPERIMENTAL RESULTS • Neuron sucked in pipette • Cell ejected from pipette • near a well • Pusher used to move cell • over the well • Cell implanted in the well • by means of the pusher • Conclusions: • Survival rate of 75%: biocompatibility of the neurochip • Action potentials arising from individual neurons • detected with a signal-to-noise ratio of 35-70:1 • Drawbacks: • Making bulk micromachined wells is very complicated • Neurites growing out on the top of the well tend to pull • neuron away

  16. PARYLENE NEURO-CAGES • Advantages of parylene: • Non-toxic, extremely inert, resistant to moisture • and most chemicals, and biocompatible • Its conformal deposition makes it easy to fabricate • 3D structures like neuro-cage • It is transparent: neurons can be seen through the • cages The cage consists of a top loading access hole, the cage body, and 6 thin channels for neurite overgrowth

  17. MICROFABRICATION PROCESS • Oxide layer is grown on silicon wafer • Channel height controlling sacrificial layer is patterned • Two parylene and one photoresist layers are used to • form the cage • The sacrificial materials are removed to release the • microcage

  18. PARYLENE-TO-OXIDE ADHESION • To improve the adhesion of the cages to the substrate: • Mechanically anchoring parylene to substrate using DRIE • To roughen the anchoring area with short time etching in BrF3 or XeF2

  19. EXPERIMENTAL RESULTS • Conclusions: • Parylene has been shown to be biocompatible • The parylene neurocages are mechanically • functional

  20. PA gels with trapped cells BUILDING LIVING NEURON CHIP WITH PA GELS

  21. photoresist silicon cast PDMS Poly(dimethylsiloxane) Substrates replica molding replica molded microwells

  22. PEPTIDE AMPHIPHILE Hartgerink, J.D., E. Beniash, and S.I. Stupp, Science, 2001. 294(5547): p. 1684-1688.

  23. O2 Plasma MEMBRANE PATTERNING PDMS

  24. SU8 SU8 SU8 SU8 SU8 SU8 SU8 SU8 Si SELF REGISTRATED MEMBRANE PATTERNING SU8-2025 Separation layer PDMS membrane layer Bulk PDMS

  25. ACKNOWLEDGEMENT • Professor Horacio D. Espinosa • TA: Yong Zhu • Team members

More Related