1 / 173

SkillsUSA Study Guide

SkillsUSA Motto. Preparing for Leadership in the World of Work. SkillsUSA Theme. SkillsUSA: Champions at Work. SkillsUSA Colors. Red and White represent the individual states and chapters Blue represents the common union of the states and the chaptersGold represents the individual. Six points of t

paiva
Télécharger la présentation

SkillsUSA Study Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. SkillsUSA Study Guide

    2. SkillsUSA Motto Preparing for Leadership in the World of Work

    3. SkillsUSA Theme SkillsUSA: Champions at Work

    4. SkillsUSA Colors Red and White represent the individual states and chapters Blue represents the common union of the states and the chapters Gold represents the individual

    5. Six points of the SkillsUSA Creed I believe in the dignity of work I believe in the America Way of Life I believe in education I believe in fair play I believe satisfaction is achieve by good work I believe in high moral and spiritual standards

    6. Official SkillsUSA Dress Women: Red blazer, sweater or jacket White collarless or small collared blouse Black skirt or pants Clear seamless hose Black shoes

    7. Official SkillsUSA Dress Men: Red VICA blazer, sweater or jacket White dress shirt, black tie Black slacks Black or cordovan shoes with black socks

    8. SkillsUSA VICA Region Missouri is in Region 4

    9. SkillsUSA VICA Missouri Director Paul Light

    10. SkillsUSA VICA Nation Executive Director Tim Lawrence

    11. Emblem The Shield represents patriotism The gear represents the industrial society The torch represents knowledge The orbital circles represent technology The hands represent the individual

    12.

    13. Pledge Upon my honor, I pledge: To prepare myself by diligent study and ardent practice to become a worker whose services will be recognized as honorable By my employer and fellow workers. To base my expectation of reward upon the solid foundation of service. To Honor and respect my vocation in such a way as to bring repute to myself. And further, to spare no effort in upholding the ideals of SkillsUSA.

    14. Which of the following is a good behavior to show during an interview? A. Nail Biting B. Unusual, memorable clothing C. Smiling D. Expressing your personal opinion on politics, social issues, and religion

    15. Which of the following is a good behavior to show during an interview? A. Nail Biting B. Unusual, memorable clothing C. Smiling D. Expressing your personal opinion on politics, social issues, and religion

    16. As a committee member, you are responsible for: A. Treating other peoples opinions and ideas with respect B. Expressing ideas C. Keeping an open mind D. All of the Above

    17. As a committee member, you are responsible for: A. Treating other peoples opinions and ideas with respect B. Expressing ideas C. Keeping an open mind D. All of the Above

    18. Which of the following is NOT a benefit of professional development activities? A. Learning to work with others B. Learning more about the job market in your chosen field C. Learning survivor strategies of under cutting team members and winning special opportunities D. Learning how to handle yourself in social situations

    19. Which of the following is NOT a benefit of professional development activities? A. Learning to work with others B. Learning more about the job market in your chosen field C. Learning survivor strategies of under cutting team members and winning special opportunities D. Learning how to handle yourself in social situations

    20. It is healthy to balance your time between: A. Leisure activities and working activities B. Your family and day-to-day activities C. All of the above D. None of the above

    21. It is healthy to balance your time between: A. Leisure activities and working activities B. Your family and day-to-day activities C. All of the above D. None of the above

    22. Job Shadowing means: A. Observing a respected person on the job B. Working behind a person in their shadow C. Mimicking a persons actions D. To follow secretly

    23. Job Shadowing means: A. Observing a respected person on the job B. Working behind a person in their shadow C. Mimicking a persons actions D. To follow secretly

    24. Preparing for Leadership in the World of Work is: A. The SkillsUSA Theme B. The SkillsUSA Motto C. The SkillsUSA Creed D. The SkillsUSA Purpose

    25. Preparing for Leadership in the World of Work is: A. The SkillsUSA Theme B. The SkillsUSA Motto C. The SkillsUSA Creed D. The SkillsUSA Purpose

    26. When delivering a speech do not: A. Smile at the audience B. Talk Fast C. Have good posture D. Maintain eye contact

    27. When delivering a speech do not: A. Smile at the audience B. Talk Fast C. Have good posture D. Maintain eye contact

    28. A _______ journal is a publication directly related to a profession. A. Sports B. Wall Street C. Literature D. Professional

    29. A _______ journal is a publication directly related to a profession. A. Sports B. Wall Street C. Literature D. Professional

    30. Which of the following is a good basic rule of a business meeting? A. Distribute an Agenda B. Allow participants to conduct conversations among themselves C. Handle all questions individually after the meeting has ended D. Avoid visual or printed support material

    31. Which of the following is a good basic rule of a business meeting? A. Distribute an Agenda B. Allow participants to conduct conversations among themselves C. Handle all questions individually after the meeting has ended D. Avoid visual or printed support material

    32. There are ______ points to the SkillsUSA Creed. A. Six B. Five C. Seven D. Four

    33. There are ______ points to the SkillsUSA Creed. A. Six B. Five C. Seven D. Four

    34. The official SkillsUSA colors are red, white, _____ and gold. A. Silver B. Yellow C. Bronze D. Blue

    35. The official SkillsUSA colors are red, white, _____ and gold. A. Silver B. Yellow C. Bronze D. Blue

    36. To create enthusiasm for learning is part of the: A. SkillsUSA Creed B. SkillsUSA Purposes C. SkillsUSA Motto D. SkillsUSA Pledge

    37. To create enthusiasm for learning is part of the: A. SkillsUSA Creed B. SkillsUSA Purposes C. SkillsUSA Motto D. SkillsUSA Pledge

    38. The officer responsible for presiding over meetings is: A. President B. Secretary C. Treasurer D. Vice President

    39. The officer responsible for presiding over meetings is: A. President B. Secretary C. Treasurer D. Vice President

    40. The SkillsUSA Creed includes: A. Preparing for leadership B. High moral and spiritual standards C. The Professional Development Program D. A members right to express ideas

    41. The SkillsUSA Creed includes: A. Preparing for leadership B. High moral and spiritual standards C. The Professional Development Program D. A members right to express ideas

    42. ________ stress could lead to physical or emotional problems. A. No B. Muscle C. Excessive D. All of the above

    43. ________ stress could lead to physical or emotional problems. A. No B. Muscle C. Excessive D. All of the above

    44. Which of the following questions would NOT be appropriate to ask during an employment survey interview? A. How much are you paying now? B. What kind of skills and experiences would I need to work here? C. Will there be openings for the type of job I'm seeking in about 5 years? D. What additional training should I consider?

    45. Which of the following questions would NOT be appropriate to ask during an employment survey interview? A. How much are you paying now? B. What kind of skills and experiences would I need to work here? C. Will there be openings for the type of job I'm seeking in about 5 years? D. What additional training should I consider?

    46. __________ stress could lead to physical or emotional problems. A. No B. Muscle C. Excessive D. All of the above

    47. __________ stress could lead to physical or emotional problems. A. No B. Muscle C. Excessive D. All of the above

    48. One way to help you identify effective work skills and behaviors is to _________someone employed in your perspective occupation. A. Marry B. Ask C. Judge D. Job Shadow

    49. One way to help you identify effective work skills and behaviors is to _________someone employed in your perspective occupation. A. Marry B. Ask C. Judge D. Job Shadow

    50. The appearance that a young professional should present is: A. Neat B. Well groomed C. Clean D. All of the above

    51. The appearance that a young professional should present is: A. Neat B. Well groomed C. Clean D. All of the above

    52. Which of the following is NOT a benefit of doing a community service project? A. Satisfaction providing needed help to some individual or cause B. Valuable training in leadership or job related skills C. Opportunity to earn extra money D. Opportunity to do what you enjoy for a good cause

    53. Which of the following is NOT a benefit of doing a community service project? A. Satisfaction providing needed help to some individual or cause B. Valuable training in leadership or job related skills C. Opportunity to earn extra money D. Opportunity to do what you enjoy for a good cause

    54. Motivating factors can be _______ or _________. A. New/Old B. Written/Spoken C. Internal/External D. Inside/Outside

    55. Motivating factors can be _______ or _________. A. New/Old B. Written/Spoken C. Internal/External D. Inside/Outside

    56. Which of the following is an example of cultural diversity? A. Different rules for interaction between men and women B. The desire for meaningful well paid employment C. A belief in the importance of individual dignity D. A preference for science related jobs

    57. Which of the following is an example of cultural diversity? A. Different rules for interaction between men and women B. The desire for meaningful well paid employment C. A belief in the importance of individual dignity D. A preference for science related jobs

    58. _______ refers to the mixing and blending of many people from different cultures who are involved in a like activity or setting. A. Cultural diversity B. Time sharing C. Respect D. Harassment

    59. _______ refers to the mixing and blending of many people from different cultures who are involved in a like activity or setting. A. Cultural diversity B. Time sharing C. Respect D. Harassment

    60. A ______ is a collection of a work representing education, self-development and career information. A. Job application B. Reward C. Portfolio D. Resume

    61. A ______ is a collection of a work representing education, self-development and career information. A. Job application B. Reward C. Portfolio D. Resume

    62. The orbital circles of the SkillsUSA emblem represent: A. Youth B. Knowledge C. The industrial society D. Technology

    63. The orbital circles of the SkillsUSA emblem represent: A. Youth B. Knowledge C. The industrial society D. Technology

    64. The purposes of SkillsUSA include: A. Creating enthusiasm for learning B. Fostering a deep respect for the dignity of work C. Helping students attain a purposeful life D. All of the above

    65. The purposes of SkillsUSA include: A. Creating enthusiasm for learning B. Fostering a deep respect for the dignity of work C. Helping students attain a purposeful life D. All of the above

    66. The SkillsUSA officer whose actions are key to the success of the entire SkillsUSA chapter is the: A. Treasurer B. President C. Parliamentarian D. Reporter

    67. The SkillsUSA officer whose actions are key to the success of the entire SkillsUSA chapter is the: A. Treasurer B. President C. Parliamentarian D. Reporter

    68. As part of the SkillsUSA emblem, what do the "hands" represent: A. The knowledge a student should be striving for in his or her schoolwork B. Patriotism, which is a love and a loyalty to one's country C. New technology and research in our occupational areas D. The individual

    69. As part of the SkillsUSA emblem, what do the "hands" represent: A. The knowledge a student should be striving for in his or her schoolwork B. Patriotism, which is a love and a loyalty to one's country C. New technology and research in our occupational areas D. The individual

    70. The treasurers duties include: A. Serving as consultant to the president on procedural matters B. Handling all correspondence and communications for the chapter C. Assisting the president and other officers in setting up an annual chapter budget D. All of the above

    71. The treasurers duties include: A. Serving as consultant to the president on procedural matters B. Handling all correspondence and communications for the chapter C. Assisting the president and other officers in setting up an annual chapter budget D. All of the above

    72. A leader motivates others and makes others want to join an endeavor. To become a good leader you must: A. Be a pessimist B. Constantly argue C. Be willing to accept responsibility D. Develops a stubborn attitude

    73. A leader motivates others and makes others want to join an endeavor. To become a good leader you must: A. Be a pessimist B. Constantly argue C. Be willing to accept responsibility D. Develops a stubborn attitude

    74. What does the Shield represent on the SkillsUSA emblem? A. Democracy B. Liberty C. Patriotism D. The USA

    75. What does the Shield represent on the SkillsUSA emblem? A. Democracy B. Liberty C. Patriotism D. The USA

    76. When seeking employment you should: A. Know what the company does B. Know the name of the person you are meeting C. Have an appointment in advance D. All of the above

    77. When seeking employment you should: A. Know what the company does B. Know the name of the person you are meeting C. Have an appointment in advance D. All of the above

    78. The symbol of the emblem that represents the industrial society is: A. The shield B. The gear C. The flaming torch D. The orbital circles

    79. The symbol of the emblem that represents the industrial society is: A. The shield B. The gear C. The flaming torch D. The orbital circles

    80. Which one is a false parliamentary procedure rule? A. One person presides to enforce the rules B. Only one question can be discussed at a time C. The decision of the minority of members must be followed D. Each member should have an opportunity to express an idea or opinion

    81. Which one is a false parliamentary procedure rule? A. One person presides to enforce the rules B. Only one question can be discussed at a time C. The decision of the minority of members must be followed D. Each member should have an opportunity to express an idea or opinion

    82. A written list of the order of business that will take place during a meeting, is known as a/an _______. A. Main motion B. Agenda C. Role-play D. Script

    83. A written list of the order of business that will take place during a meeting, is known as a/an _______. A. Main motion B. Agenda C. Role-play D. Script

    84. According to the Leadership Handbook, a public speech should have what three basic parts: A. Introduction, body and closing B. Instruction, speech and review C. Review, evidence and thank you D. Discussion, examples and summary

    85. According to the Leadership Handbook, a public speech should have what three basic parts: A. Introduction, body and closing B. Instruction, speech and review C. Review, evidence and thank you D. Discussion, examples and summary

    86. When completing the past employment section on an application, in what order should jobs be listed? A. Start with your current or most recent job B. The order is not important C. Start with your first job D. Start with the job most related to your career objective

    87. When completing the past employment section on an application, in what order should jobs be listed? A. Start with your current or most recent job B. The order is not important C. Start with your first job D. Start with the job most related to your career objective

    88. Which of the following are part of the SkillsUSA creed: A. Dignity of work B. The American Way of Life C. Education D. All of the above

    89. Which of the following are part of the SkillsUSA creed: A. Dignity of work B. The American Way of Life C. Education D. All of the above

    90. Which of the following would NOT normally be found in a trade journal? A. Listings of trade shows or educational seminars related to your trade B. Articles by experts in the field C. Short stories written by novelists from selected entertainment sectors D. New concepts, trends, and products in your occupational field

    91. Which of the following would NOT normally be found in a trade journal? A. Listings of trade shows or educational seminars related to your trade B. Articles by experts in the field C. Short stories written by novelists from selected entertainment sectors D. New concepts, trends, and products in your occupational field

    92. Filling out a/an _______ is often the first step when applying for a job. A. Employment preference B. Resume C. W-2 Form D. Job application

    93. Filling out a/an _______ is often the first step when applying for a job. A. Employment preference B. Resume C. W-2 Form D. Job application

    94. What does the color blue represent in the SkillsUSA emblem? A. State of the Union B. Union of all individuals C. The individual states and chapters D. The common union of the states and chapters

    95. . What does the color blue represent in the SkillsUSA emblem? A. State of the Union B. Union of all individuals C. The individual states and chapters D. The common union of the states and chapters

    96. To make a motion at a meeting, you must state your motion by saying: A. I feel we should B. I move that C. I make the motion that D. Yo, I wanna do this

    97. To make a motion at a meeting, you must state your motion by saying: A. I feel we should B. I move that C. I make the motion that D. Yo, I wanna do this

    98. The SkillsUSA officer responsible for presiding over and conducting meetings in the absence of the president is the _______. A. Secretary B. President C. Vice President D. Sergeant

    99. The SkillsUSA officer responsible for presiding over and conducting meetings in the absence of the president is the _______. A. Secretary B. President C. Vice President D. Sergeant

    100. When traveling what is the expected gratuity for good service in a restaurant? A. 5-10% B. 10-15% C. 15-20% D. 20-25%

    101. When traveling what is the expected gratuity for good service in a restaurant? A. 5-10% B. 10-15% C. 15-20% D. 20-25%

    102. When preparing to give a presentation you should: A. Become an expert on your topic B. Know your audience C. Practice, practice, practice D. All of the above

    103. When preparing to give a presentation you should: A. Become an expert on your topic B. Know your audience C. Practice, practice, practice D. All of the above

    104. Which of the following does NOT belong in a portfolio? A. Photos of a project B. Letters of recommendations C. Pictures of your vacation D. All of the above

    105. Which of the following does NOT belong in a portfolio? A. Photos of a project B. Letters of recommendations C. Pictures of your vacation D. All of the above

    106. Which officer is responsible for roll call? A. President B. Treasurer C. Secretary D. Vice President

    107. Which officer is responsible for roll call? A. President B. Treasurer C. Secretary D. Vice President

    108. According to basic parliamentary procedure: A. Only second year members may vote B. Only members completing the PDP may vote C. Students can only express their opinion if they do not vote D. Every member has a right to express ideas or opinions

    109. According to basic parliamentary procedure: A. Only second year members may vote B. Only members completing the PDP may vote C. Students can only express their opinion if they do not vote D. Every member has a right to express ideas or opinions

    110. The preheat orifices on a oxyacetylene cutting-torch are adjusted to flame. A. Neutral B. Oxidize C. Reduce D. Carburize

    111. The preheat orifices on a oxyacetylene cutting-torch are adjusted to flame. A. Neutral B. Oxidize C. Reduce D. Carburize

    112. Cutting tip size is determined by: A. Material thickness B. Acetylene working pressure C. The orifice diameter D. Both A and C

    113. Cutting tip size is determined by: A. Material thickness B. Acetylene working pressure C. The orifice diameter D. Both A and C

    114. Plasma arc cutting can be used to cut: A. Steel B. Stainless steel C. Aluminum D. All of the above

    115. Plasma arc cutting can be used to cut: A. Steel B. Stainless steel C. Aluminum D. All of the above

    116. Plasma-arc torches are capable of producing temperatures of: A. 25,000 F B. 40,000 F C. 5,800 F D. 10,000 F

    117. Plasma-arc torches are capable of producing temperatures of: A. 25,000 F B. 40,000 F C. 5,800 F D. 10,000 F

    118. In welding applications the term "base metal" refers to: A. Low alloy metal B. The metal to be joined C. A pure alloy D. The filler material

    119. In welding applications the term "base metal" refers to: A. Low alloy metal B. The metal to be joined C. A pure alloy D. The filler material

    120. The nonuniform expansion and contraction of weld metal and adjacent base metals is called: A. Distortion B. Tempering C. Annealing D. Ductility

    121. The nonuniform expansion and contraction of weld metal and adjacent base metals is called: A. Distortion B. Tempering C. Annealing D. Ductility

    122. Which of the following characteristics of a weld could NOT be determined by visual inspection? A. Cracks B. Dilution C. Inclusions D. Contour

    123. Which of the following characteristics of a weld could NOT be determined by visual inspection? A. Cracks B. Dilution C. Inclusions D. Contour

    124. Coated electrodes are superior to bare electrodes because: A. They provide maximum protection for the weld metal B. High current may be used to increase the deposit rate C. They have improved arc structuring characteristics D. All of the above

    125. Coated electrodes are superior to bare electrodes because: A. They provide maximum protection for the weld metal B. High current may be used to increase the deposit rate C. They have improved arc structuring characteristics D. All of the above

    126. The number 1 of a 6010 electrode indicates its: A. Tensile strength B. Position C. Type of coating D. Polarity

    127. The number 1 of a 6010 electrode indicates its: A. Tensile strength B. Position C. Type of coating D. Polarity

    128. Which of the following processes does NOT involve a consumable electrode? A. Electrode slag welding B. Gas metal arc welding C. Gas tungsten arc welding D. Submerged arc welding

    129. Which of the following processes does NOT involve a consumable electrode? A. Electrode slag welding B. Gas metal arc welding C. Gas tungsten arc welding D. Submerged arc welding

    130. When moving a compressed gas cylinder, a steel safety cap should be in place: A. To prevent damage to the flow meter B. To prevent damage to the threads C. To prevent damage to the valve D. Because the valves are very expensive

    131. When moving a compressed gas cylinder, a steel safety cap should be in place: A. To prevent damage to the flow meter B. To prevent damage to the threads C. To prevent damage to the valve D. Because the valves are very expensive

    132. When arc welding between 100 and 200 amps, which filter lens is generally used? A. No. 4 B. No. 6 C. No. 10 D. Either dark green or black

    133. When arc welding between 100 and 200 amps, which filter lens is generally used? A. No. 4 B. No. 6 C. No. 10 D. Either dark green or black

    134. When arc welding, protective clothing should be worn by welders to protect them from: A. Heat B. Rays C. Spatter D. All of the above

    135. When arc welding, protective clothing should be worn by welders to protect them from: A. Heat B. Rays C. Spatter D. All of the above

    136. When opening an acetylene cylinder, the valve should never be opened: A. At a high rate of speed B. More than one and one-half turns C. More than five turns D. Less than five turns

    137. When opening an acetylene cylinder, the valve should never be opened: A. At a high rate of speed B. More than one and one-half turns C. More than five turns D. Less than five turns

    138. To ensure safety in storing acetylene, the cylinder is: A. Equipped with a special nozzle B. Filled with a limited amount of gas C. Made of seamless steel D. Packed with a porous material saturated with acetone

    139. To ensure safety in storing acetylene, the cylinder is: A. Equipped with a special nozzle B. Filled with a limited amount of gas C. Made of seamless steel D. Packed with a porous material saturated with acetone

    140. An electrode that has deep penetrating characteristics has a tendency to cause: A. Overlapping B. Pin holes C. Sagging D. Undercutting

    141. An electrode that has deep penetrating characteristics has a tendency to cause: A. Overlapping B. Pin holes C. Sagging D. Undercutting

    142. Undercutting is a condition that generally occurs when the: A. Welding current is too high B. Welding current is too low C. Welding travel speed is too slow D. Arc length is too short

    143. Undercutting is a condition that generally occurs when the: A. Welding current is too high B. Welding current is too low C. Welding travel speed is too slow D. Arc length is too short

    144. In production welding, the rate of deposited metal will increase as the: A. Skill of the welder increases B. Size of the electrode and the current increases C. Size of the welding cables increases D. Speed of travel increases

    145. In production welding, the rate of deposited metal will increase as the: A. Skill of the welder increases B. Size of the electrode and the current increases C. Size of the welding cables increases D. Speed of travel increases

    146. When a transformer type welding machine is in operation, the electrode is supplied with: A. Alternating current B. Direct current C. Higher amperages D. Higher voltages

    147. When a transformer type welding machine is in operation, the electrode is supplied with: A. Alternating current B. Direct current C. Higher amperages D. Higher voltages

    148. Which one of the following is NOT a consideration when a welding set-up is being made? A. The type and size of the electrode to use B. The type and amount of current to use C. The type of ground clamp to be used D. The weldability of the parent metal

    149. Which one of the following is NOT a consideration when a welding set-up is being made? A. The type and size of the electrode to use B. The type and amount of current to use C. The type of ground clamp to be used D. The weldability of the parent metal

    150. A major limitation of flux-cored welding is that it: A. Is a low deposition process B. Produces low quality welds C. Is limited to thin gauge materials D. Is applicable only to ferrous metals

    151. A major limitation of flux-cored welding is that it: A. Is a low deposition process B. Produces low quality welds C. Is limited to thin gauge materials D. Is applicable only to ferrous metals

    152. In GMAW - MIG "whiskers" are: A. Multiple cracks in weld metal B. Pieces of electrode sticking in weld joint C. Hairline cracks in heat affected zone D. Difficult-to-remove traces of flux

    153. In GMAW - MIG "whiskers" are: A. Multiple cracks in weld metal B. Pieces of electrode sticking in weld joint C. Hairline cracks in heat affected zone D. Difficult-to-remove traces of flux

    154. In GMAW - MIG the most economical position is: A. Flat B. Horizontal C. Vertical D. All of these

    155. In GMAW - MIG the most economical position is: A. Flat B. Horizontal C. Vertical D. All of these

    156. Contact tips for GMAW welding are made of which material? A. Brass B. Carbon steel C. Copper D. Stainless

    157. Contact tips for GMAW welding are made of which material? A. Brass B. Carbon steel C. Copper D. Stainless

    158. How many categories of motions are recognized by Roberts Rules of Order, Newly Revised? A. 5 B. 4 C. 3 D. 2

    159. How many categories of motions are recognized by Roberts Rules of Order, Newly Revised? A. 5 B. 4 C. 3 D. 2

    160. In a business meeting, how many people preside at one time? A. 1 B. 2 C. 3 D. 4

    161. In a business meeting, how many people preside at one time? A. 1 B. 2 C. 3 D. 4

    162. Two types of goals are: A. Defined and reasonable B. Measurable and visual C. Short term and long term D. Personal and measurable

    163. Two types of goals are: A. Defined and reasonable B. Measurable and visual C. Short term and long term D. Personal and measurable

    164. What does the acronym PDP stand for? A. Personal Development Properties B. Passive Deterrent People C. People Doing Program D. Professional Development Program

    165. What does the acronym PDP stand for? A. Personal Development Properties B. Passive Deterrent People C. People Doing Program D. Professional Development Program

    166. "I Believe in the American Way of Life" is a part of the: A. SkillsUSA-VICA Motto B. SkillsUSA-VICA Theme C. SkillsUSA-VICA Pledge D. SkillsUSA-VICA Creed

    167. "I Believe in the American Way of Life" is a part of the: A. SkillsUSA-VICA Motto B. SkillsUSA-VICA Theme C. SkillsUSA-VICA Pledge D. SkillsUSA-VICA Creed

    168. Which SkillsUSA-VICA document says you will "prepare myself by diligent study and ardent practice?" A. SkillsUSA-VICA Pledge B. SkillsUSA-VICA Creed C. SkillsUSA-VICA Motto D. SkillsUSA-VICA Theme

    169. Which SkillsUSA-VICA document says you will "prepare myself by diligent study and ardent practice?" A. SkillsUSA-VICA Pledge B. SkillsUSA-VICA Creed C. SkillsUSA-VICA Motto D. SkillsUSA-VICA Theme

    170. Which color of the SkillsUSA-VICA emblem represents the individual? A. Red B. Blue C. Gold D. White

    171. Which color of the SkillsUSA-VICA emblem represents the individual? A. Red B. Blue C. Gold D. White

    172. According to the Leadership Handbook, a public speech should be broken down into what three basic parts? A. Instruction, speech and summary B. Opening, examples and review C. Introduction, body and closing D. Review, evidence and thank you

    173. According to the Leadership Handbook, a public speech should be broken down into what three basic parts? A. Instruction, speech and summary B. Opening, examples and review C. Introduction, body and closing D. Review, evidence and thank you

More Related