1 / 86

S.P.B.Patel Engineering College,Mehsana Electrical Department

S.P.B.Patel Engineering College,Mehsana Electrical Department. Student Name :- 1.Shah Yash J. 2.Jibsonjacob 3.Deep Ajay P. 4.Lakhani Raja A. 5.Ajmeri Arifhusen A . Faculty Name:- Snehal V.Malvi.

paniz
Télécharger la présentation

S.P.B.Patel Engineering College,Mehsana Electrical Department

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. S.P.B.Patel Engineering College,MehsanaElectrical Department • Student Name:-1.Shah Yash J. 2.Jibsonjacob 3.Deep Ajay P. 4.Lakhani Raja A. 5.Ajmeri Arifhusen A. • Faculty Name:- Snehal V.Malvi

  2. THREE PHASE CIRCUIT

  3. Objectives • Explain the differences between single-phase, two-phase and three-phase. • Compute and define the Balanced Three-Phase voltages. • Determine the phase and line voltages/currents for Three-Phase systems.

  4. SINGLE PHASE TWO WIRE

  5. SINGLE PHASE SYSTEM • A generator connected through a pair of wire to a load – Single Phase Two Wire. • Vp is the magnitude of the source voltage, and  is the phase.

  6. SINLGE PHASE THREE WIRE

  7. SINGLE PHASE SYSTEM • Most common in practice: two identical sources connected to two loads by two outer wires and the neutral: Single Phase Three Wire. • Terminal voltages have same magnitude and the same phase.

  8. POLYPHASE SYSTEM • Circuit or system in which AC sources operate at the same frequency but different phases are known as polyphase.

  9. TWO PHASE SYSTEM THREE WIRE

  10. POLYPHASE SYSTEM • Two Phase System: • A generator consists of two coils placed perpendicular to each other • The voltage generated by one lags the other by 90.

  11. POLYPHASE SYSTEM • Three Phase System: • A generator consists of three coils placed 120 apart. • The voltage generated are equal in magnitude but, out of phase by 120. • Three phase is the most economical polyphase system.

  12. THREE PHASE FOUR WIRE

  13. IMPORTANCE OF THREE PHASE SYSTEM • All electric power is generated and distributed in three phase. • One phase, two phase, or more than three phase input can be taken from three phase system rather than generated independently. • Melting purposes need 48 phases supply.

  14. IMPORTANCE OF THREE PHASE SYSTEM • Uniform power transmission and less vibration of three phase machines. • The instantaneous power in a 3 system can be constant (not pulsating). • High power motors prefer a steady torque especially one created by a rotating magnetic field.

  15. IMPORTANCE OF THREE PHASE SYSTEM • Three phase system is more economical than the single phase. • The amount of wire required for a three phase system is less than required for an equivalent single phase system. • Conductor: Copper, Aluminum, etc

  16. THREE PHASE GENERATION

  17. FARADAYS LAW • Three things must be present in order to produce electrical current: • Magnetic field • Conductor • Relative motion • Conductor cuts lines of magnetic flux, a voltage is induced in the conductor • Direction and Speed are important

  18. S N GENERATING A SINGLE PHASE Motion is parallel to the flux. No voltage is induced.

  19. S N x GENERATING A SINGLE PHASE Motion is 45° to flux. Induced voltage is 0.707 of maximum.

  20. S N x GENERATING A SINGLE PHASE Motion is perpendicular to flux. Induced voltage is maximum.

  21. S N x GENERATING A SINGLE PHASE Motion is 45° to flux. Induced voltage is 0.707 of maximum.

  22. S N GENERATING A SINGLE PHASE Motion is parallel to flux. No voltage is induced.

  23. S N x GENERATING A SINGLE PHASE Motion is 45° to flux. Notice current in the conductor has reversed. Inducedvoltage is 0.707 of maximum.

  24. S N x GENERATING A SINGLE PHASE Motion is perpendicular to flux. Induced voltage is maximum.

  25. S N x GENERATING A SINGLE PHASE Motion is 45° to flux. Induced voltage is 0.707 of maximum.

  26. S N GENERATING A SINGLE PHASE Motion is parallel to flux. No voltage is induced. Ready to produce another cycle.

  27. THREE PHASE GENERATOR

  28. GENERATOR WORK • The generator consists of a rotating magnet (rotor) surrounded by a stationary winding (stator). • Three separate windings or coils with terminals a-a’, b-b’, and c-c’ are physically placed 120 apart around the stator.

  29. As the rotor rotates, its magnetic field cuts the flux from the three coils and induces voltages in the coils. • The induced voltage have equal magnitude but out of phase by 120.

  30. S x x N GENERATION OF THREE-PHASE AC

  31. Phase 1 Phase 2 Phase 3 120° 120° 120° 120° 120° 120° 240° 240° THREE-PHASE WAVEFORM Phase 2 lags phase 1 by 120°. Phase 2 leads phase 3 by 120°. Phase 3 lags phase 1 by 240°. Phase 1 leads phase 3 by 240°.

  32. Phase 1 Phase 2 Phase 3 S x x N GENERATION OF 3 VOLTAGES Phase 1 is ready to go positive. Phase 2 is going more negative. Phase 3 is going less positive.

  33. THREE PHASE QUANTITIES

  34. BALANCED 3 VOLTAGES • Balanced three phase voltages: • same magnitude (VM ) • 120 phase shift

  35. BALANCED 3 CURRENTS • Balanced three phase currents: • same magnitude (IM ) • 120 phase shift

  36. PHASE SEQUENCE NEGATIVE SEQUENCE POSITIVE SEQUENCE

  37. PHASE SEQUENCE

  38. EXAMPLE # 1 • Determine the phase sequence of the set voltages:

  39. BALANCED VOLTAGE AND LOAD • Balanced Phase Voltage: all phase voltages are equal in magnitude and are out of phase with each other by 120. • Balanced Load: the phase impedances are equal in magnitude and in phase.

  40. THREE PHASE CIRCUIT • POWER • The instantaneous power is constant

  41. THREE PHASE CIRCUIT • Three Phase Power,

  42. THREE PHASE QUANTITIES

  43. PHASE VOLTAGES and LINE VOLTAGES • Phase voltage is measured between the neutral and any line: line to neutral voltage • Line voltage is measured between any two of the three lines: line to line voltage.

  44. PHASE CURRENTS and LINE CURRENTS • Line current (IL) is the current in each line of the source or load. • Phase current (I) is the current in each phase of the source or load.

  45. THREE PHASE CONNECTION

  46. SOURCE-LOAD CONNECTION

  47. SOURCE-LOAD CONNECTION • Common connection of source:WYE • Delta connected sources: the circulating current may result in the delta mesh if the three phase voltages are slightly unbalanced. • Common connection of load:DELTA • Wye connected load: neutral line may not be accessible, load can not be added or removed easily.

  48. WYE CONNECTION

  49. WYE CONNECTED GENERATOR

  50. WYE CONNECTED LOAD OR

More Related