1 / 68

Partition Equilibrium of a Solute Between Two Immiscible Solvents

16.8. Partition Equilibrium of a Solute Between Two Immiscible Solvents. A(solvent 2) A(solvent 1). 16.8 Partition Equilibrium of a Solute Between Two Immiscible Solvents (SB p.104). Partition (Distribution) Equilibrium.

paul2
Télécharger la présentation

Partition Equilibrium of a Solute Between Two Immiscible Solvents

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 16.8 Partition Equilibrium of a Solute Between Two Immiscible Solvents

  2. A(solvent 2) A(solvent 1) 16.8 Partition Equilibrium of a Solute Between Two Immiscible Solvents (SB p.104) Partition (Distribution) Equilibrium • The equilibrium established when a non-volatile solute distributes itself between two immiscible liquids

  3. Partition (Distribution) Equilibrium Water and 1,1,1-trichloroethane are immiscible with each other.

  4. Partition (Distribution) Equilibrium • I2dissolves in both layers to different extent.

  5. Partition (Distribution) Equilibrium Strictly speaking, I2 is NOT non-volatile !

  6. Partition (Distribution) Equilibrium When dynamic equilibrium is established  rate of  movement = rate of  movement

  7. Suppose the equilibrium concentrations of iodine in H2O and CH3CCl3 are x and y respectively,

  8. Suppose the equilibrium concentrations of iodine in H2O and CH3CCl3 are x and y respectively, Changing the concentrations by the same extent does not affect the quotient When dynamic equilibrium is established  the concentrations of iodine in water and 1,1,1-trichloroethane reach a constant ratio

  9. 16.8 Partition Equilibrium of a Solute Between Two Immiscible Solvents (SB p.104) Partition Coefficient The partition law states that: • At a given temperature, the ratio of the concentrations of a solute in two immiscible solvents (solvent 1 and solvent 2) is constant when equilibrium has been reached • This constant is known as the partition coefficient (or distribution coefficient)

  10. 16.8 Partition Equilibrium of a Solute Between Two Immiscible Solvents (SB p.104) Partition Coefficient The partition law can be represented by the following equation: (no unit) Units of concentration : mol dm-3, mol cm-3, g dm-3, g cm-3

  11. [Solute] [Solute] = = K solvent solvent 1 2 [Solute] [Solute] solvent solvent 1 2 K Partition Coefficient The partition coefficient of a solute between solvent 2 and solvent 1 is given by The partition coefficient of a solute between solvent 1 and solvent 2 is given by

  12. Partition Coefficient • Not affected by the amount of solute added and the volumes of solvents used. • TAS Experiment No. 12

  13. Partition law holds true • at constant temperature • for dilute solutions • For concentrated solutions, interactions between solvent and solute have to be considered and the concentration terms should be expressed by ‘activity’(not required)

  14. C2 C1 C6H5COOH(benzene) C6H5COOH(aq) Partition law holds true 3. when the solute exists in the same form in both solvents. C1and C2 are determined by titrating the acid in each solvent with standard sodium hydroxide solution.

  15. Not a constant

  16. Benzoic acid dimer Interpretation : - • The solute does not have the same molecular form in both solvents • Benzoic acid tends to dimerize (associate) in non-polar solvent to give (C6H5COOH)2 Partition law does not apply

  17. 2C6H5COOH(benzene) (C6H5COOH)2(benzene) Interpretation : -  = degree of association of benzoic acid [C6H5COOH]total = [C6H5COOH]free + [C6H5COOH]associated C2 C2(1-) C2 Determined by titration with NaOH

  18. Q.17(a) The interaction between benzoic acid and benzene molecules are weaker than the hydrogen bonds formed between benzoic acid molecules. Thus benzoic acids tend to form dimers when dissolved in benzene. In aqueous solution, benzoic acid molecules form strong H-bond with H2O molecules rather than forming dimer.

  19. Q.17(b) In aqueous solution, there is no association as explained in (a). Also, dissociation of acid can be ignored since benzoic acid is a weak acid (Ka = 6.3  10-5 mol dm-3).

  20. 2C6H5COOH(benzene) (C6H5COOH)2(benzene) C6H5COOH(benzene) C6H5COOH(aq) Partition coefficient Q.17(c) C1

  21.  is a constant at fixed T

  22. Applications of partition law • Solvent extraction • Chromatography Two classes of separation techniques based on partition law.

  23. Colourless Hexane + hexane I2 in hexane I2 in hexane I2 in KI(aq) I2 in KI(aq) I2 in KI(aq) I2 in KI(aq) I2 in hexane I2 in hexane I2 in KI(aq) I2 in KI(aq) Solvent extraction To remove I2 from an aqueous solution of KI, a suitable solvent is added. It is immiscible with water.  Organic solvents are preferred. It dissolves I2 but not KI.  Organic solvents are preferred. It can be recycled easily (e.g. by distillation)  Organic(volatile)solvents are preferred. What feature should the solvent have? At equilibrium, rate of  movement of I2 = rate of  movement of I2 By partition law,

  24. Hexane layer Aqueous layer After shaking Before shaking 16.8 Partition Equilibrium of a Solute Between Two Immiscible Solvents (SB p.104) Solvent Extraction Iodine can be extracted from water by adding hexane, shaking and separating the two layers in a separating funnel

  25. Determination of I2 left in both layer Titrated with standard sodium thiosulphate solution I2 + 2S2O3 2I + S4O62

  26. Determination of I2 left in the KI solution For the aqueous layer, starch is used as the indicator. For the hexane layer, starch is not needed because the colour of I2 in hexane is intense enough to give a sharp end point.

  27. Worked example In solvent extraction, it is more efficient (but more time-consuming) to use the solvent in portions for repeated extractions than to use it all in one extraction.

  28. 50g X in 40 cm3 ether solution 10g X in 25 cm3 aqueous solution By partition law, Worked example : - (a) Calculate the partition coefficient of X between ether and water at 298 K. M is the molecular mass of X

  29. 50g X in 40 cm3 ether solution 10g X in 25 cm3 aqueous solution Worked example : - Or simply,

  30. xg of X in 30 cm3 ether solution 30 cm3 ether (5-x)g of X in 30 cm3 aqueous solution 5g of X in 30 cm3 aqueous solution (b)(i) Determine the mass of X that could be extracted by shaking a 30 cm3 aqueous solution containing 5 g of X witha single 30 cm3 portion of etherat 298 K

  31. xg of X in 30 cm3 ether solution 30 cm3 ether (5-x)g of X in 30 cm3 aqueous solution 5g of X in 30 cm3 aqueous solution (b)(i) 3.79 g of X could be extracted.

  32. x1g of X in 15 cm3 ether solution 15 cm3 ether (5-x1)g of X in 30 cm3 aqueous solution 5g of X in 30 cm3 aqueous solution (b)(ii) First extraction

  33. x2g of X in 15 cm3 ether solution 15 cm3 ether (5-x1-x2)g of X in 30 cm3 aqueous solution (5-x1)g of X in 30 cm3 aqueous solution (b)(ii) Second extraction

  34. total mass of X extracted = (3.05 + 1.19) g = 4.24 g > 3.79 g. Repeated extractions using smaller portions of solvent are more efficient than a single extraction using larger portion of solvent. However, the former is more time-consuming

  35. Important extraction processes : - • Products from organic synthesis, if contaminated with water, can be purified by shaking with a suitable organic solvent. • Caffeine in coffee beanscan be extracted bySupercritical carbon dioxide fluid (decaffeinated coffee) • Impurities such as sodium chloride and sodium chlorate present in sodium hydroxide solution can be removed by extracting the solution with liquid ammonia. Purified sodium hydroxide is the raw material for making soap, artificial fibre, etc.

  36. Q.18(a) Alcohol layer 200 cm3 alcohol Aqueous layer 100 cm3 of 0.5 M ethanoic acid Calculate the % of ethanoic acid extracted at 298 K by shaking 100 cm3 of a 0.50 M aqueous solution of ethanoic acid with200 cm3 of 2-methylpropan-1-ol;

  37. Q.18(a) Let x be the fraction of ethanoic acid extracted to the alcohol layer No. of moles of acid in the original solution = 0.5  0.100 = 0.05

  38. Q.18(b) Let x1, x2 be the fractions of ethanoic acid extracted to the alcohol layer in the 1st and 2nd extractions respectively. 1st extraction 2nd extraction % of acid extracted = 0.247 + 0.186 = 0.433 = 43.3%

  39. Q.19 Let x cm3 be the volume of solvent X required to extract 90% of iodine from the aqueous solution and y be the no. of moles of iodine in the original aqueous solution.  7.5 cm3 of solvent X is required

  40. 16.8 Partition Equilibrium of a Solute Between Two Immiscible Solvents (SB p.104) Check Point 16-8A

  41. Chromatography A family of analytical techniques for separating the components of a mixture. Derived from the Greek root chroma, meaning “colour”, because the original chromatographic separations involved coloured substances.

  42. Chromatography In chromatography, repeated extractions are carried out successively in one operation (compared with fractional distillation in which repeated distillations are performed) which results, as shown in the worked example and Q.18, in an effective separation of components.

  43. All chromatographic separations are based upon differences in partition coefficients of the components between a stationary phaseand amobile phase.

  44. The stationary phase is a solvent (often H2O) adsorbed (bonded to the surface) on a solid. This may be paper or a solid such as alumina or silica gel, which has been packed into a column or spread on a glass plate. The mobile phase is a second solvent which seeps through the stationary phase.

  45. There are three main types of chromatography 1. Column chromatography 2.Paper chromatography 3.Thin layer chromatography

  46. Column chromatography Stationary phase : - Water adsorbed on the adsorbent (alumina or silica gel) Mobile phase : - A suitable solvent (eluant) that seeps through the column

  47. Column chromatography Partition of components takes place repeatedly between the two phases as the components are carried down the column by the eluant. The components are separated into different bands according to their partition coefficients.

  48. Column chromatography The component with the highest coefficient between mobile phase and stationary phase is carried down the column by the mobile phase most quickly and comes out first.

  49. Column chromatography Suitable for large scale treatment of sample For treatment of small quantities of samples, paper or thin layer chromatography is preferred.

  50. X(adsorbed water) X(solvent) stationary phasemobile phase Paper chromatography • Stationary phase : - • Water adsorbed on paper. • Mobile phase : - • A suitable solvent • The best solvent for a particular separation should be worked out by trials-and-errors

More Related