1 / 24

ENGINEERING GRAPHICS 1E7

ENGINEERING GRAPHICS 1E7. Lecture 1: Introduction Lecturer: Dr. Bidisha Ghosh ( bghosh@tcd.ie ) . Course Structure. Assessment. Examination: 65% of the overall mark 3 sections (A, B and C) 2 questions per section 3 questions to be answered, one from each section

prema
Télécharger la présentation

ENGINEERING GRAPHICS 1E7

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ENGINEERING GRAPHICS1E7 Lecture 1: Introduction Lecturer: Dr. Bidisha Ghosh (bghosh@tcd.ie)

  2. Course Structure

  3. Assessment • Examination: 65% of the overall mark • 3 sections (A, B and C) • 2 questions per section • 3 questions to be answered, one from each section • Dr B. Gosh : Sections A and B • Dr G. O’Donnell : Section C • Labs 35% - assessed by coursework • 10 % AutoCAD • 10 % Pspice • 10% D.O. Tutorials Dr B. Gosh • 5 % D.O. Assignment Dr G. O’Donnell

  4. Time Table

  5. Syllabus – Hand Drawing 1 • Basic Construction • Orthographic Projections • Isometric Projections • Auxiliary Views • Perspective : One-Point • Perspective : Two-Point

  6. Aim of the Course • Knowledge of engineering drawing instruments • Understanding and interpretation of technical drawings • Ability to develop projections of a 3D object

  7. Evaluation • Examination (Sections A & B) (2/3 of the total examination marks) • Continuous Assessment (10% of the total course marks) • four drawing office tutorials

  8. Technical drawing is the language of engineers and designers Waterfall M. C. Escher

  9. Topics of Interest • Drawing Instruments • Lines • Dimensioning

  10. DRAWING INSTRUMENTS 1 • Drawing Board

  11. DRAWING INSTRUMENTS 2 • Drawing Sheets

  12. DRAWING INSTRUMENTS 3 • Layout of a Drawing Sheet

  13. DRAWING INSTRUMENTS 4 • Tee square/ Drafting Machine

  14. DRAWING INSTRUMENTS 5 • Set squares (a pair)

  15. DRAWING INSTRUMENTS 6 • Irregular/ French curves

  16. DRAWING INSTRUMENTS 7 • Compasses • Divider • Protractor • Ruler/Scale • Pencil, Eraser

  17. DRAWING LINES 1 TYPES OF LINES • 3 Main Types

  18. DRAWING LINES 2 • Lines to aid understanding

  19. DIMENSIONING 1 Dimension Lines (DL) Position of DL

  20. DIMENSIONING 2 Alignment of DL DL of Small Features Dimensioning Angles Dimensioning Circles

  21. DIMENSIONING 3

  22. DIMENSIONING 4 Correct Practice of Dimensioning Drawing should only carry dimensions needed to manufacture

  23. Reference Books • Technical Draughtsmanship • By Eanna O’Broin • Engineering Drawing with Worked Examples • By M.A. Parker & F. Pickup • Technical Drawing • ByF. E. Giesecke, A. Mitchell, • H. C. Spencer, I. L. Hill, J. T. Dygdon, • J. E. Novak

  24. Assignment for Thursday! • Get your instruments sorted- buy them or borrow them

More Related