1 / 15

Waters of Hydration

Waters of Hydration. Purpose:. Determine the formula of a hydrate from experimental data. Failure to wear EYE safety GOGGLES. Hydrate = chemical with water molecules loosely bonded to it. Anhydrous salt (removing water from a Hydrate) Waters of hydration.

preston-mitchell
Télécharger la présentation

Waters of Hydration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Waters of Hydration

  2. Purpose: • Determine the formula of a hydrate from experimental data Failure to wear EYE safety GOGGLES

  3. Hydrate = chemical with water molecules loosely bonded to it. • Anhydrous salt (removing water from a Hydrate) • Waters of hydration Copper (II) Sulfate Pentahydrate CuSO4·5H2O

  4. Experimental Overview • Obtain mass of hydrate • Remove waters of hydration • Crucible dry • Obtain mass of anhydrous salt(hydrate with water removed)

  5. Remove waters of hydration – Heat to a constant mass • Heat sample (crucible) • Cool sample • Obtain mass of sample

  6. Remove waters of hydration – Crucible • Prepare crucible • Heat sample

  7. Prepare Crucible • Heat strongly for 5 minutes • Handle hot crucible with tongs. • DO NOT TOUCH with fingers. • Burns • Skin oils • Obtain combined mass of cool crucible

  8. Remove waters of hydration - crucible • Place ~2-3 grams of hydrate in crucible • Determine mass of hydrate, crucible Heat gentlyuntil no visible evidence of water remains • Color (sometimes) • “boiling” • Heat with blue flame ~5 minutes • When crystals turn white, heat additional 30 seconds then remove. • DO NOT overheat

  9. Dispensing solid reagents • ALWAYS replace the lid of a jar or bottle after dispensing a reagent. • Clean scoopula between dispensing substances. • Never return excess reagent to reagent jar.

  10. Use of the Balance • Sample cool for at least 10 minutes • Find mass again.

  11. Data AnalysisDetermine the formula of the hydrate • Determine the mass of the waters of hydration mass of waters of hydration = mass of hydrate – mass of anhydrous salt • Convert the mass of anhydrous salt to moles of anhydrous salt.  Moles of anhydrous salt = (mass of anhydrous salt)/(molar mass of anhydrous salt) • Convert the mass of the waters of hydration to moles of waters of hydration. Moles of waters of hydration = (mass of waters of hydration)/ (18.01 g/mole) • Determine the ratio of moles of water of hydration to moles of anhydrous salt. Moles of waters of hydration/moles of anhydrous salt Round ratio to an integer • Write the correct formula of the hydrate.

  12. 1. Mass of hydrated CuSO4•nH2O (Subtract crucible) 2. Mass of anhydrous CuSO4•nH2O (Subtract crucible) 3. Mass of nH2O (Subtract) 2.87g- 1.85 g = 1.02g 4. % of H2O in hydrate #3/#1 X 100 1.02g H2O/ 2.87g CuSO4•nH2O x 100 1. 2.87gCuSO4•nH2O 2. 1.85 g CuSO4 3. 1.02g H2O 4. 35.5%

  13. 5. Moles of H2O (1.02 g (1mol/18g H2O) 6. Moles of CuSO4 (1.85 g (1 mole/159.5CuSO4) Water units for each anhydride: 5. 0 .0567 mole H2O 6. .0116 mole CuSO4 4.89 = 5 0 .0567 mole H2O .0116 mole CuSO4 CuSO4•5H2O

  14. CuSO4•5H2O

More Related