1 / 13

DARIM SeeHawk5.1 Software Quick Guide

DARIM SeeHawk5.1 Software Quick Guide. SeeHawk Software Installation. Connection. Monitoring. Sensor Setting. Image memory. PTZ Control. Audio Control. 1. SeeHawk Software Installation. 1-1. Software download from Darvison FTP. 1-2. Softwae Install Methode and information.

qamar
Télécharger la présentation

DARIM SeeHawk5.1 Software Quick Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DARIM SeeHawk5.1 Software Quick Guide • SeeHawk Software Installation. • Connection. • Monitoring. • Sensor Setting. • Image memory. • PTZ Control. • Audio Control.

  2. 1. SeeHawk Software Installation. 1-1. Software download from Darvison FTP. 1-2. Softwae Install Methode and information. 1-3. Software execution and exit. 1-1. Software Download( ftp://darvision.com/pub/seehawk/software/seeHawk5.1/sh5160.exe ) from darvision FTP site. Double Click

  3. 1-2. Install configuration setting. 1. Start install 2. Click 1-2. Software Installing… 3. Installing 4. Click

  4. 1-3. Software Execution and Exit. Double Click SeeHawk Software execution. SeeHawk Icon in windows background screen does Double Click. Default is Disconnect State. Exit Button At early, Software is Disconnect state. ConnectionReady(status edit) Exit Exit Icon does click.

  5. 2. Connection 2-1. Direct RS232 Connection. 2-2. PSTN Line Connection. 2-1. Direct RS232-Connection 3. Port Select. 1. Click 2. Com Select. 4. Password 5. Click

  6. 2-1. PSTN Line Connection 2. Click 3. PC MODEM 1. Click 4. Password 5. SeeHawk Phone number 6. Click

  7. 3. Monitoring 3-1. Live Monitoring... 3-2. Callback Monitoring... 4. Channel Start/Stop 3-1. Live Monitoring… 1. Click 7. JPG Capture 5. Image Size Zoom 2. Camera Selection. 6. AVI Capture 8. Quality Select. 3. Click “O.K” 9. Image setting.

  8. 3-2. Callback Monitoring… 13. Receive Video Data after automatic connection by Callback. 1. Click 9. Click 11. Click(into the Callback Mode) 10. Sensitivity Setting. 12. CallBack Mode icon 2. CallBack Properties 5. Sensor Select. 6. Save(Click) 3. CallBack Phone Number(PC) 7. Click 4. Click 14. Live Mode (Ready Mode) 8. Click “O.K”

  9. 4. Sensor Setting… 4-1. Digital Input Setting. 4-2. Relay Output Setting. 9. Alarm Image 4-1. Digital Input setting. 5. Number Image of Capture 3. Check… 4. Check… 1. Click 6. Check… 7. Save(Click) 2. Click 8. Check…

  10. 4-2. Relay Output setting. 4. Automatic On/Off 1. Click 2. Click 3. Click Direct Relay On/Off Do On/Off by Click.

  11. 5. Image Memory. 5. Image memory. 3. Click 1. Click Image Size 4. Select From SeeHawk5.1 Snapshot Images 2. Click

  12. 6. PTZ Control 6. PTZ Control. 1. Click 4. Control 2. Select 3. Select

  13. 7. Audio Control. 7. Audio Control Full-Duplex Audio In/Out 1. Click 7. AGC/AEC On/Off 3. Click Mic/Line On/Off 5. Sh5.1 spk On/Off 6. Sh5.1 Mic On/Off 2. Select (Line-in/mic) 4. Click Spk On/Off

More Related