1 / 26

Turbulent Boundary Layer on a flat plate ( dp e / dx =0)

Turbulent Boundary Layer on a flat plate ( dp e / dx =0). Contents : 1/7 velocity law; Equations for the turbulent boundary layer with zero pressure gradient ( dp e /dx=0) ; Virtual origin of the boundary layer; Hydraulically smooth and fully rough flat plates.

race
Télécharger la présentation

Turbulent Boundary Layer on a flat plate ( dp e / dx =0)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Contents: • 1/7 velocity law; • Equations for the turbulent boundary layer with zero pressure gradient (dpe/dx=0); • Virtual origin of the boundary layer; • Hydraulically smooth and fully rough flat plates. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  2. x – Distance to the leading edge Laminar flow • Beginning of the BL very large • Sufficiently long plate : Re increases Critical Re (5105) decreases Transition to turbulent Boundary Layer Introdution • Transition from laminar to turbulent regime: Fluid Mechanics II Prof. António Sarmento - DEM/IST

  3. Boundary Layer Introdution • Turbulent regions of the BL: • Linear sub-layer (no turbulence); • Transition layer; • Central region – logaritmic profile zone (turbulence not affected by the wall); • External zone(turbulent vortices mixed with non-turbulent outside flow). Fluid Mechanics II Prof. António Sarmento - DEM/IST

  4. Law of the wall • Experimental results from the law of the wall Fluid Mechanics II Prof. António Sarmento - DEM/IST

  5. Central region • Transition layer Law of the wall • Characteristics of the velocity profile u*=f(y*): • Linear, laminar or viscous sub-layer Fluid Mechanics II Prof. António Sarmento - DEM/IST

  6. Take for any y • Take - less reliable approximation, but easier to apply; • does not allow to calculate the shear stress in the wall. Other approxmations for u=u(y) Fluid Mechanics II Prof. António Sarmento - DEM/IST

  7. (Flat plates and ReL107) – Velocity profile (empirical): Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Bases: –Von Kárman equation: Note 1: the velocity profile in the BL follows the law of the wall , but this law has a less convenient form. Note 2: as we saw in the laminar case, the integral parameters of the BL are little affected by the shape of the velocity profile Fluid Mechanics II Prof. António Sarmento - DEM/IST

  8. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Shear stress on the wall: Note: this expression relates 0 with  (still unknown). Fluid Mechanics II Prof. António Sarmento - DEM/IST

  9. a =7/72 • Conclusion: 7/72=0,0972<0,133 (Laminar BL) Turbulent Boundary Layer on a flat plate (dpe/dx=0) • As we saw: Fluid Mechanics II Prof. António Sarmento - DEM/IST

  10. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • On the other hand: • Form Factor: Laminar BL => 2,59 The fuller the velocity profile is, closer to 1 the Form Factor is. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  11. Von Kármàn Equation: Equation to 0: Turbulent Boundary Layer on a flat plate (dpe/dx=0) Note: xo is the point where =0. In general we choose xo to be in the beginning of the turbulent BL. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  12. Transtion zone Laminar BL c 0 xc x0 (Rec5,5105) Turbulent Boundary Layer on a flat plate (dpe/dx=0) • BL evolution on the flat plate: Turbulent BL Fluid Mechanics II Prof. António Sarmento - DEM/IST

  13. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Case 1 – the section of interest is very far away from the critical section (x>>xc): the BL is assumed to be turbulent from the beginning of the plate (x0=0=0). Valid if L>>xc (or ReL>>Rec). L is the plate lenght Fluid Mechanics II Prof. António Sarmento - DEM/IST

  14. From the Von Kármán equation aL=0,133 (Blasius) aT=7/72 Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Case 2 – the section of interest is not very faraway from the critical section: the transition zone is not considered • => m0mc andx0=xc. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  15. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Virtual origin of the turbulent BL: xv xv xc=xo Would be as if the BL started turbulent from xvto reache 0 in x0. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  16. xv xc=xo Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Case 2: calculation of the drag on the plate. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  17. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Correlations for higher Re: for Re109 for 3106 Re109 Fluid Mechanics II Teacher António Sarmento - DEM/IST

  18. Hidraulicaly fully rough plates if Turbulent Boundary Layer • Hidraulically smooth plates if All the contents studied before are for smooth plates Fluid Mechanics II Prof. António Sarmento - DEM/IST

  19. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Contents: • 1/7 Law of velocities; • Turbulent boundary layer expressions with dpe/dx null above a flat plate; • Virtual origin of the boundary layer; • Hydraulically smooth and fully rough plates. Fluid Mechanics II Teacher António Sarmento - DEM/IST

  20. Turbulent Boundary Layer on a flat plate (dpe/dx=0) • Sources: • Sabersky – Fluid Flow: 8.9 • White – Fluid Mechanics: 7.4 Fluid Mechanics II Teacher António Sarmento - DEM/IST

  21. Exercise • A plate is 6 m long and 3 m wide and is immersed in a water flow (=1000 kg/m3, =1,1310-6 m2/s) with na undisturbed velocity of 6 m/s parallel to the plate. Rec=106. Compute: • a) The thickness of the BL at x=0,25 m; • b) The thickness of the BL at x=1,9 m; • c) The total drag on the plate; • d) The maximum roughness on the plate for it to be hydraulically smooth. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  22. Exercise: solution • L= 6 m; b=3 m; =1000 kg/m3; =1,1310-6 m2/s; U= 6 m/s; Rec=106. • a) Thickness of the BL at x1=0,25 m? If we had addmited that the BL grew turbulent from the beginning: In this case, the result would be significantly different Fluid Mechanics II Prof. António Sarmento - DEM/IST

  23. Exercise: solution • L= 6 m; b=3 m; =1000 kg/m3; =1,1310-6 m2/s; U= 6 m/s; Rec=106. • b) Thickness of the BL at x2=1,9 m? If we had addmited that the BL grew turbulent from the beginning: In this case, the result would have a much smaller difference Fluid Mechanics II Prof. António Sarmento - DEM/IST

  24. Exercise: solution • L= 6 m; b=3 m; =1000 kg/m3; =1,1310-6 m2/s; U= 6 m/s; Rec=106. • c) Total drag on the plate? For a 1/7 velocity law => a=7/72 => If we had addmited that the BL grew turbulent from the beginning: Difference of 2,5% Fluid Mechanics II Prof. António Sarmento - DEM/IST

  25. Exercise: solution • L= 6 m; b=3 m; =1000 kg/m3; =1,1310-6 m2/s; U= 6 m/s; Rec=106. • c) Total drag on the plate? Difference between computing D taking into account the laminar BL or assuming turbulent from the leading edge. Fluid Mechanics II Prof. António Sarmento - DEM/IST

  26. Exercise: solution • L= 6 m; b=3 m; =1000 kg/m3; =1,1310-6 m2/s; U= 6 m/s; Rec=106. • d) Maximum roughness on the plate to be hidraulically smooth? It is necessary that: with Where is 0 bigger? In the beginning of the turbulent BL Fluid Mechanics II Prof. António Sarmento - DEM/IST

More Related