1 / 25

Photonic Crystals:

Photonic Crystals: A Novel Approach to Enhance the Light Output of Scintillation Based Detectors. Arno KNAPITSCH a , Etiennette AUFFRAY a , Paul LECOQ a. a PH-CMX,CERN, Geneva, Switzerland. Outline:. Introduction Scintillating Crystals Motivation Photonic Crystals Simulations

reginaldturner
Télécharger la présentation

Photonic Crystals:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Photonic Crystals: A Novel Approach to Enhance the Light Output of Scintillation Based Detectors Arno KNAPITSCHa, Etiennette AUFFRAYa, Paul LECOQa a PH-CMX,CERN, Geneva, Switzerland

  2. Outline: • Introduction • Scintillating Crystals • Motivation • Photonic Crystals • Simulations • Monte Carlo • A Frequency- Domain Eigenmode Solver • Results • PhC Fabrication • Sputter Deposition • Electron Beam Lithography • Reactive Ion Etching • Results • Conclusion

  3. Scintillating Crystals ionizing radiation Light emission Scintillating Crystal Cerium-doped Lutetium Yttrium Orthosilicate Bismuth germinate Cerium-doped Lutetium-Yttrium Aluminum Perovskite Cerium-doped Lutetium Aluminum Garnet • What is scintillation? • Emission of light due to an ionizing event • What kind of scintillators are there? • Intrinsic (BWO, BGO) or extrinsic(LYSO:Ce, LuAG:Ce) scintillators • Organic, inorganic, liquid-, plastic, gaseous • Common scintillators in HEP and medical imaging • LYSO:Ce(Lu2-xYxSiO5), BGO(Bi4Ge3O12), LuYAP:Ce(LuxY1-xAlO3), LuAG:Ce(Lu3Al5O7)

  4. Motivation: Application Principle of PET [2] CMS (Compact Muon Solenoid) at the LHC [1] Field of application of heavy inorganic scintillators • High energy physics (HEP), medical imaging (e.g. PET), spectroscopy

  5. Motivation: Increase Nr. of detected Photons Main limiting factor for the light collection efficiency : • Total reflection due to a mismatch of the refractive index of crystal and detector • Snell’s Law: Efficiency: Main factors governing energy- and time resolution: • Detected number of photoelectrons Npe

  6. Motivation: Photonic Crystal incident light reflected light extracted modes How can a photonic crystal help to overcome those limits? • Light extraction due to a periodic grating of the interface:

  7. Photonic Crystals (PhCs) • [3] J. D. Joannopoulos, Photonic crystals – Molding the flow of light, 2008 Photonic crystal basics: • Periodic arrangement of two materials with different index of refraction, in one-, two-, or three dimensions

  8. How does the Photonic Crystal Work? Plain crystal- air interface: (EM – fieldplot [5] ) Crystal- air interface with PhC grating: crystal air crystal air Plane Wave θ>θc Total Reflection at the interface since Extracted Mode (~60% Transmission) θ>θc (0% Transmission) Diffracted modes interfere constructively in the PhC- grating and are therefore able to escape the Crystal

  9. Outline: • Introduction • Scintillating Crystals • Motivation • Photonic Crystals • Simulations • Monte Carlo • A Frequency- Domain Eigenmode Solver • Results • PhC Fabrication • Sputter Deposition • Electron Beam Lithography • Reactive Ion Etching • Results • Conclusion

  10. Simulation: A two Step Approach 1. 2. θc • Look at the angular distribution at the crystal- detector interface with a Monte- Carlo simulation tool (LITRANI [5]) • Take the light distribution from the Monte-Carlo program and simulate the light extraction of a scintillator- PhC- air interface with an eigenmode expansion software (CAMFR [4])

  11. Optimize the PhC Design z a Si3N4 hole depth: d ITO Scintillator y hole diameter: D x • PhC crystal parameters: • Lattice constant: a • Hole diameter: D • Hole depth: d • Optimize the parameters for maximal light transmission over all angles: • Parameters in case of LYSO: • a = 340nm • D = 200nm • d = 300nm

  12. Light Gain Crystal Type: LYSO Crystal measurements: 1.3x2.6x8mm Wrapping: Tyvek Light Gain when comparing to an unstructured Crystal:

  13. Results of different Crystals:

  14. Outline: • Introduction • Scintillating Crystals • Motivation • Photonic Crystals • Simulations • Monte Carlo • A Frequency- Domain Eigenmode Solver • Results • PhC Fabrication • Sputter Deposition • Electron Beam Lithography • Reactive Ion Etching • Results • Conclusion

  15. PhC Fabrication Reactive ion etching reactor Scanning electron Microscope Nano Lithography • PhC is produced in cooperation with the INL (Institut des Nanotechnologies de Lyon) • Three step approach: • Deposition of a pattern transfer material • Patterning of the resist using a scanning electron Microscope • Pattern transfer using reactive ion etching (RIE)

  16. Sputter Deposition z z Si3N4 300nm ITO ITO 70nm 70nm Scintillator Scintillator y y x x Sputtering of two different Materials: • ~70nm of ITO (Indium Tin Oxide) • ~300nm of Si3N4 (Silicon Nitride)

  17. Electron Beam Patterning Electron beam z z z PMMA Resist PMMA Resist PMMA Si3N4 Si3N4 Si3N4 ITO ITO ITO Scintillator Scintillator Scintillator y y y x x x • Deposit of an resist material (PMMA) by spin coating • Writing the PhC pattern into the resist with a scanning electron microscope (SEM) • Removing the exposed areas on the resist with an chemical solvate

  18. Reactive Ion Etching (RIE) Ion Bombardment z z a PMMA Resist Si3N4 Si3N4 Hole depth: 300nm ITO ITO Scintillator Scintillator y y hole diameter: 200nm x x Chemically reactive plasma removes Si3N4 not covered by the resist Change the composition of the reactive plasma to remove the resist (PMMA) without etching the Si3N4

  19. PhC Results D = 200nm a = 340nm Scanning Electron Images:

  20. Outline: • Introduction • Scintillating Crystals • Motivation • Photonic Crystals • Simulations • Monte Carlo • A Frequency domain Eigenmode Solver • Results • PhC Fabrication • Sputter Deposition • Electron Beam Lithography • Reactive Ion Etching • Results • Conclusion • Outlook • Acknowledgement

  21. Conclusion 1. 90% and 110% • Simulations show an light yield enhancement between 80% and 120%

  22. Conclusion 2. The PhC- production process has been adapted to the requirements of the crystal • Due to the ITO layer we have good electrical connectivity from the Si3N4 to the surrounding • The RIE parameters were adapted to the required etching depth without having anisotropic effects on the pattern • Lattice parameters of the PhC could be verified

  23. Outlook • Optical Characterization of the PhC • Light Yield Measurements • Angular Distribution • Compare the measurement- results to the simulations and classify possible deviations • Use the knowledge obtained by the measurements to further optimize the PhC pattern of the next samples

  24. Acknowledgments Many thanks to the staff of the INL – Lyon, especially to J.-L. Leclercq and C. Seassal for their support and advice during my stays in Lyon.

  25. References [1] http://public.web.cern.ch/public/en/LHc/CMS-en.html [2] http://www.nature.com/nrc/journal/v4/n6/box/nrc1368_BX1.html [3] J. D. Joannopoulos, Photonic crystals – Molding the flow of light, 2008 [4] Photonic crystal LEDs - designing light extraction, C. Wiesmann, 2009 [5] CAMFR, (CAvity Modelling FRamework), http://camfr.sourceforge.net [6] LITRANI, http://gentit.home.cern.ch/gentit/litrani/

More Related