1 / 7

Electric Charge

Electric Charge. Charge can be transferred between objects Amount of charge lost = amount of charge gained Ways to charge: 1. Conduction 2. Induction Like charges repel Opposite charges attract. Coulomb’s Law.

rodd
Télécharger la présentation

Electric Charge

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electric Charge • Charge can be transferred between objects • Amount of charge lost = amount of charge gained • Ways to charge: 1. Conduction • 2. Induction • Likecharges repel • Opposite charges attract

  2. Coulomb’s Law The amount of force between two objects is dependent upon two things: 1. The amount of charge of each present 2. The distance between the two charges Felectric = kq1q2 k = coulomb’s constant r2 9.0 X 109 N*m2/C2

  3. Electric Force is a field force • Goes out in ALL directions (not just one) • Represent electric field force with lines • Draw lines going out for (+) charges • Draw lines coming infor (-) charges • The stronger the electric force • 1. the greater the # of lines drawn • 2. the closer they are drawn together

  4. Circuits Parallel Parts of: Battery Provides voltage Wire Path for charge to flow Provides some resistance Bulb Uses current Provides some resistance Switch Regulates flow of charge Series

  5. Voltage (electric potential) = the change in potential energy as a charge moves from one place to another • Unit is Volts (V) • Current- the amount of charge passing through the circuit • Unit is Amperes-Amps (A) • Resistance – opposition to the flow of current • Unit is Ohm’s () VoltageCurrentResistance V = PE I = QR = V q t I Ohm’s Law

  6. Power – the rate at which charge does work P = IV = I2R = (V)2 R Electric Current is used for energy E = Pt = I2Rt = V2t R

  7. Series Circuits • The CURRENT stays the SAME throughout the circuit • The TOTAL RESISTANCE (equivalent resistance) is the SUM of all the resistors in the circuit • The TOTAL VOLTAGE is the SUM of the voltage drop across each resistor in the circuit Parallel Circuits • The TOTAL CURRENT is the SUM of the current across each resistor in the circuit • The EQUIVALENT RESISTANCE is the following: 1/Req = 1/R1 + 1/R2 + 1/R3 • The VOLTAGE is the SAME throughout the circuit

More Related