1 / 16

EUT 1040

EUT 1040. Lecture 4: Operational Amplifiers. Differential Amplifier. Not Practical Prior to IC Fabrication 2 Inputs, Output is A v *(V 1 - V 2 ). Common Mode Rejection. Differential Amps won’t Amplify Signals that are Common to both Inputs. Operational Amplifier. Three Stages:

rossa
Télécharger la présentation

EUT 1040

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EUT 1040 Lecture 4: Operational Amplifiers

  2. Differential Amplifier • Not Practical Prior to IC Fabrication • 2 Inputs, Output is Av*(V1 - V2)

  3. Common Mode Rejection • Differential Amps won’t Amplify Signals that are Common to both Inputs

  4. Operational Amplifier • Three Stages: • Differential Amplifier (Input Stage) • Voltage Amplifier (High Gain) • Output Stage (low output impedance)

  5. Op Amp Characteristics • High Input Impedance ( 1 M-Ohm) • Low Output Impedance (100 Ohms) • High Voltage Gain (A = 100,000) • 2 Differential Inputs • Inverting Input (V-) • Non-Inverting Input (V+)

  6. Equivalent Circuit Model • Differential Input Voltage determines Output Voltage

  7. Ideal Op Amp • Input Impedance is Infinite (No input Current, I- = I+ = 0) • Voltage Gain is Infinite (A = Infinity) • Inverting and Non-inverting inputs at equal potential (V+ = V- )

  8. Feedback • Open Loop Voltage Gain is so High that External Feedback is always used • Output Signal is Fed Back to an Input Terminal

  9. Analysis of Ideal Op Amp Circuits • Set V- = V+ and I- = I+ = 0 • Write Nodal Equation(s)

  10. Basic Op Amp Circuits • Voltage Follower: Impedance Matching or Isolation • Unity Gain: Vout = Vin

  11. Inverting Amplifier • Vout = -(R2/R1)*Vin

  12. Non-Inverting Amplifier • Vout = Vin*(R1+R2)/R1

  13. Summing Amplifier • Vout = -(V1*Rf/R1 + V2*Rf/R2 + V3*Rf/R3)

  14. Difference Amplifier • Vout = (V2-V1)*R2/R1

  15. Analysis of the Voltage Follower • Provides “Current Isolation” – No Power Drawn from Input Circuit

  16. References • Heathkit, Electronic Circuits, EB-6104A, 2002 • Alexander, Fundamentals of Circuit Analysis – 2nd Edition, McGraw-Hill, 2004

More Related