'Linear dimensions' diaporamas de présentation

MEASUREMENT AND INSPECTION

MEASUREMENT AND INSPECTION. Metrology Inspection Principles Conventional Measuring Instruments and Gages Measurement of Surfaces Advanced Measurement and Inspection Techniques. Measurement.

969 views • 33 slides

Scaling Three-Dimensional Figures

Scaling Three-Dimensional Figures. 7.9. Pre-Algebra. Warm Up. Find the surface area of each rectangular prism. 1. length 14 cm, width 7 cm, height 7 cm 2. length 30 in., width 6 in., height 21 in 3. length 3 mm, width 6 mm, height 4 mm 4. length 37 in., width 9 in., height 18 in.

713 views • 21 slides

DIMENSIONING

1.21k views • 20 slides

Indication of Dimensions and Tolerances

Indication of Dimensions and Tolerances. ISO129-1: 2004 Part 1: General principles. General Principle. All dimensions, graphical symbols and annotations shall be indicated such that they can be read from the bottom or right-hand side (main reading directions) of the drawing

296 views • 15 slides

Surface Areas and Volumes of Spheres

351 views • 14 slides

10-8 Areas and Volumes of Similar Solids

10-8 Areas and Volumes of Similar Solids. Similar solids have the same shape, and all their corresponding dimensions are proportional. The ratio of corresponding linear dimensions of two similar solids is the similarity ratio . Any two cubes are similar. Any two spheres are similar.

234 views • 13 slides

Forging new generations of engineers

Forging new generations of engineers. Dimension Practices. Linear Dimensions. Linear dimensions are divided into two categories:. Size Dimensions Location Dimensions. These two categories will be used in this PowerPoint and the rest of the lesson. Size Dimensions.

218 views • 12 slides

Forging new generations of engineers

Forging new generations of engineers. Dimension Practices. Linear Dimensions. Linear dimensions are divided into two categories:. Size Dimensions Location Dimensions. These two categories will be used in this PowerPoint and the rest of the lesson. Size Dimensions.

124 views • 12 slides

George L. Clark 3M Materials X-ray

Director Danielle L. Gray dgray@illinois.edu 244-1708 Crystallographer Amy Fuller amylee34@illinois.edu 333-3959 Biocrystallographer Yi Gui Gao gao@scs.uiuc.edu 244-1131. Business Hours 8:30a - 12:00p and 1:00p - 4:30p Monday - Friday

158 views • 9 slides

Capacitance

391 views • 9 slides

Lab 1 Roundness and Sphericity

Lab 1 Roundness and Sphericity. In this lab you will determine the roundness and sphericity of a number of sedimentary particles and will investigate the relationship between these two properties of particles. Roundness Roundness refers to the sharpness of the corners and edges of a grain.

585 views • 7 slides

Scaling of MOS Circuits

Scaling of MOS Circuits. EE213 VLSI Design. Scaling. VLSI technology is constantly evolving towards smaller line widths Reduced feature size generally leads to better / faster performance More gate / chip More accurate description of modern technology is ULSI (ultra large scale integration.

561 views • 6 slides

11.7 Areas and Volumes of Similar Solids

11.7 Areas and Volumes of Similar Solids. Similar solids have the same shape, and all their corresponding dimensions are proportional. The ratio of corresponding linear dimensions of two similar solids is the scale factor . Any two cubes are similar, as are any two spheres.

334 views • 5 slides