1 / 14

HUB

Instruction of ADAM-4577 configuration and testing. 2002/ APR/04. BY:SS LIN IAG/QE. Ss.lin@advantech.com.tw. Configuration PC. HUB. 172.18.0.2. ADAM4577-1. 172.18.0.1. ADAM4577-2. GND. GND. RX. TX. RX. TX. 2. 3. 5. 2. 3. 5. Notice:

shafira-ramos
Télécharger la présentation

HUB

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Instruction of ADAM-4577 configuration and testing 2002/APR/04 BY:SS LIN IAG/QE Ss.lin@advantech.com.tw Configuration PC HUB 172.18.0.2 ADAM4577-1 172.18.0.1 ADAM4577-2 GND GND RX TX RX TX 2 3 5 2 3 5 Notice: Hand shaking pin(DTR/DSR/RTS/CTS) was not supported for ADAM-4577 Short RX and TX pin for loopback testing in RS232 mode This is necessary for loop back test on stage2

  2. Stage1 :ADAM4577 configuration step1 Give a name

  3. STEP2 Give an IP

  4. STEP3 Setting serial port parameter

  5. step4 Set TCP port number

  6. Step 5 :follow step 1~4 to configure “paired” second adam4577

  7. step6

  8. step7

  9. step8 Be noticed here is different

  10. STAGE2 :LOOP BACK TEST Step2-1

  11. Step2-2

  12. Step2-3

  13. Step2-4

  14. HUB ADAM4577-1 ADAM4577-2 172.18.0.1 172.18.0.2 GND GND RX TX RX TX 2 3 5 2 3 5 2 3 5 2 3 5 GND GND RX TX RX TX pc2 pc1 Rs232 com port Rs232 com port Now pc1 and pc2 can talking each other via Ethernet

More Related