1 / 5

Goals: * Analyse experimental data from JET * Setup the SOLPS environment at JET

SOLPS5 modelling of Type I ELMing H-mode at JET. TFE modelling meeting 2007 Progress report. Goals: * Analyse experimental data from JET * Setup the SOLPS environment at JET * Start simulation of preELM phase at JET. D1Z_VSFE_LT configuration. Shot # 69818

shanon
Télécharger la présentation

Goals: * Analyse experimental data from JET * Setup the SOLPS environment at JET

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SOLPS5 modelling of Type I ELMing H-mode at JET TFE modelling meeting 2007 Progress report Goals: * Analyse experimental data from JET * Setup the SOLPS environment at JET * Start simulation of preELM phase at JET

  2. D1Z_VSFE_LT configuration Shot # 69818 (Carbon Ablation) ne Ptot Prad A.Huber ELM parameters felm = 5 Hz (First Type I ELMs) Wdia/ΔWELM=5.9/0.7 MJ Wdia Type I ELMing H-mode at JET : Discharge parameters Dalpha Dalpha Parameters Bt = 2.5 T Ip = 2.5 MA ne=4x1019 m-3 ne (dl) = 11x 1019 m-2 Prad(max)=130MW P(NBI)=20 MW P(sol)=14MW Wdia PNBI Ptot Prad Gas puff GAS PUFF= NO

  3. Data analysis Upstream profiles : preELM phase Shift applied to edge LIDAR = 5.2 cm !!! (found experimentally by A. Kallenbach ) ne [m-3] CXSE Ti [eV] * nesepm = 2x1019 m-3 preELM * * * * * * ELM * * * * * * separatrix Te [eV] separatrix Ti and Te in confined region approximately the same ~3keV in core ~2keV at the separatrix - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 0.1 0.2 r-rsep

  4. Langmuir probes - divertor Inner target Outer target jsat [A.m-2] 36 jsat [A.m-2] jsat [105A.m-2] 1 35 2 34 3 33 4 Inner outer 5 30 6 29 7 28 8 Dalpha Dalpha Te [eV] Te [eV] Te [eV] S1 S28C S2 S29A S3A S3C S29C S4A S30A ne [m-3] S4B ne [m-3] ne [1019m-3] S30C S4C S5A S33A S5B S33C S5C S6C S34A rmid [m] rmid [m] S7C rmid [m] S35A S8B S36A S8C

  5. SOLPS simulation – pre ELM Inputs (experiment): PSOL = 14 MW ne(sepm) =2x1019 m-3 ΔWELM=0.7 MJ Launched runs: *B2/Eirene *Standalone *flat radial profile *TB *poloidally symetric radial profile *no TB in divertor legs Mesh: 36x96 cells Inputs (free): from neoclassical + JETTO estimations D = 0.02 m2.s-1 χi = 0.1 m2.s-1 χe~χi /40 = 0.025 m-3.s-1 ΔETB ~ 4cm Experiment => Ti~Te => Equipartition of energy But from neoclasical theory => χe < χi! • Decrease power flux of electrons or • Increase power flux of ions in inner core in order to keep Ti~Te  Not converged yet  Future plans: * Continue in SOLPS runs for preELM * Type I ELM simulation + drifts

More Related