1 / 34

Analysis aims Data samples Analysis chains Results Conclusions

Wobble and On-Off Sensitivity comparisons Saverio Lombardi, INFN - Padova slombard@pd.infn.it Munich Collaboration Software Premeeting 2008/04/22. Overview. Analysis aims Data samples Analysis chains Results Conclusions. Analysis aims. Confirmation of the improvements due to the

sheng
Télécharger la présentation

Analysis aims Data samples Analysis chains Results Conclusions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wobble and On-OffSensitivitycomparisonsSaverio Lombardi, INFN - Padovaslombard@pd.infn.itMunich Collaboration Software Premeeting 2008/04/22

  2. Overview • Analysis aims • Data samples • Analysis chains • Results • Conclusions

  3. Analysis aims • Confirmation of the improvements due to the time informations added in the analysis chain • Comparison of the Sensitivities for different cleanings(for On-Off mode) • Comparison between the performances of the 2 different data taken mode

  4. CRAB MUX Data samples • Off sample: 2.12 hours (2007/02/12-13), 14< Zd <30, PSF ~ 13mm On sample: 5.64 hours (2007/02/13-15-17-19), 8< Zd <30, PSF ~ 13mm • Wobble sample: 3.35 hours(2007/02/14-16), 8< Zd <30, PSF ~ 13mm (B2-1215+30 source (2007/03/12 - same Off day) for Wobble training) • MC data (On-Off, Wobble): 1  zbin 12STD Energy (power law=-2.6), PSF ~ 13mm

  5. Analysis chains • Mars Version: 1-5-4 • Calibrated data from PIC • Preliminary Cuts: • STD Filter and Quality cuts • Lower Size = 80 phe • 40 < Dist [mm] < 340 ---> only for On-Off samples • Checks of the rates ---> runs rejections • Considered Cleanings: ABS6-3 [+ time constraints, Notime constraints] ABS[4-2, 5-2.5, 7-4] + t.c. SCALED[3-1, 2.5-0.5] +t.c. • Considered Osteria settings: STD-timing RF and STD-Notiming RF

  6. ON-OFF

  7. On-Off: ABS6-3(t.c) - TimeRF Low E: 30 <Conc*Size [phe] 60, |Alpha|< 12, Had.< 0.15

  8. On-Off: ABS6-3(t.c) - NO TimeRF Low E: 30 <Conc*Size [phe] 60, |Alpha|< 12, Had.< 0.15 - 65.6%

  9. On-Off: ABS6-3(t.c) - TimeRF Intermediate E: Conc*Size [phe] 100, |Alpha|< 7, Had.< 0.04

  10. On-Off: ABS6-3(t.c) - NO TimeRF Intermediate E: Conc*Size [phe] 100, |Alpha|< 7, Had.< 0.04 +30.8%

  11. On-Off: ABS6-3(t.c) - TimeRF High E: Conc*Size [phe] 400, |Alpha|< 7, Had.< 0.15

  12. On-Off: ABS6-3(t.c) - NO TimeRF High E: Conc*Size [phe] 400, |Alpha|< 7, Had.< 0.15 +37.5%

  13. On-Off: Comparison results Low E (peak~100 GeV) 30 <Conc*Size [phe] 60, |Alpha|< 12, Had.< 0.15 Exc. Exc./Sqrt(Bkg) SigmaLiMa Sensitivity % Diff. [%Crab, 50h] Exc./Sqrt(Bkg) ABS6-3TT 498 8.10 3.75 20.746.08 0% ABS6-3Tn 151 2.79 1.30 60.2552.55 -65.6% ABS6-3nT 314 5.94 2.78 28.2611.28 -26.7% ABS6-3nn ~ 0 - - - - ABS4-2TT ~ 0 - - - - ABS5-2.5TT 439 7.64 3.54 21.976.86 -5.7% ABS7-4TT 520 8.13 3.81 20.665.95 +0.4% SCL3-1TT ~ 0 - - - - SCL2.5-0.5TT ~ 0 - - - -

  14. On-Off: Comparison results Intermediate E (peak~280 GeV) Conc*Size [phe] 100, |Alpha|< 7, Had.< 0.04 Sensitivity Gamma rate Hadron rate Rate % Diff. [%Crab, 50h] [evts/min] [evts/min] ratio Sensitivity ABS6-3TT 1.430.14 3.59 0.32 11.2 0% ABS6-3Tn 1.870.15 3.50 0.51 6.9 +30.8% ABS6-3nT 1.720.15 3.50 0.44 8.0 +20.3% ABS6-3nn 1.840.15 3.50 0.50 7.0 +28.7% ABS4-2TT 2.530.23 2.49 0.48 5.2 +76.9% ABS5-2.5TT 1.730.16 3.29 0.39 8.4 +21.0% ABS7-4TT 1.560.13 3.72 0.41 9.1 +9.1% SCL3-1TT 1.620.15 3.18 0.32 9.9 +13.3% SCL2.5-0.5TT 1.630.17 2.82 0.25 11.3 +14.0%

  15. WOBBLE

  16. Wobble: ABS6-3(t.c) - TimeRF Low E: 30 <Conc*Size [phe] 60, |Alpha|< 12, Had.< 0.15

  17. Wobble: ABS6-3(t.c) - NO TimeRF Low E: 30 <Conc*Size [phe] 60, |Alpha|< 12, Had.< 0.15 - 77.8%

  18. Wobble: ABS6-3(t.c) - TimeRF Intermediate E: Conc*Size [phe] 100, |Alpha|< 7, Had.< 0.04

  19. Wobble: ABS6-3(t.c) - NO TimeRF Intermediate E: Conc*Size [phe] 100, |Alpha|< 7, Had.< 0.04 +28.3%

  20. Wobble: ABS6-3(t.c) - TimeRF High E: Conc*Size [phe] 400, |Alpha|< 7, Had.< 0.15

  21. Wobble: ABS6-3(t.c) - NO TimeRF High E: Conc*Size [phe] 400, |Alpha|< 7, Had.< 0.15 +70.7%

  22. ON-OFF vs WOBBLE

  23. ON-OFF vs WOBBLE (for STD analysis)(2.12h+2.12h) vs (2.12h) ON-OFF Low E: 90 < E [GeV] < 120, |Alpha|< 14, Had.< 0.15

  24. ON-OFF vs WOBBLE (for STD analysis)(2.12h+2.12h) vs (2.12h) WOBBLE Low E: 90 < E [GeV] < 120, |Alpha|< 14, Had.< 0.15 - 68.8%

  25. ON-OFF vs WOBBLE (for STD analysis)(2.12h+2.12h) vs (2.12h) ON-OFF Int. E (~280 GeV): Size > 400 phe, |Alpha|< 7, Had.< 0.04

  26. ON-OFF vs WOBBLE (for STD analysis)(2.12h+2.12h) vs (2.12h) WOBBLE Int. E (~280 GeV): Size > 400 phe, |Alpha|< 7, Had.< 0.04 +22.8%

  27. ON-OFF vs WOBBLE (for STD analysis)(2.12h+2.12h) vs (2.12h) ON-OFF High E (~1.1 TeV): Size > 1000 phe, |Alpha|< 7, Had.< 0.04

  28. ON-OFF vs WOBBLE (for STD analysis)(2.12h+2.12h) vs (2.12h) WOBBLE High E (~1.1 TeV): Size > 1000 phe, |Alpha|< 7, Had.< 0.04 +41.9%

  29. Conclusions • Improvement of the timing analysis chain confirmed (one more time) for both data taken mode (~30% for Interm. E) • ABS6-3 + t.c. is the best cleaning in terms of Sensitivity Both time informations in IC and in RF are necessary • On-Off vs Wobble (w.r.t the fixed applied analysis cuts): • Low E (90< E [GeV] < 120): On-Off better ~ 70% in term of Exc./Sqrt(Bkg) • Intermediate E (~280GeV): On-Off better ~25% in term of the Sensitivity • High E (~1.1 TeV): On-Off mode is ~40% better than Wobble mode in term of Sensitivity • More statistics needed in order to improve the results particularly for the low Energies

  30. Interesting “Wobble-Tables” • Wobble sample: 3.35h, Wobble MC: 1 < zbin < 12 : • Lower Size cut = 80 phes, no Dist cut applied • Logarithmic Energy Bins: 1.7 - 3.5, step 0.3 • Linear Hadronness Bins: 0.02 - 5, step 0.02 • Number of OFF points = 1 • Signal region: |Alpha| < 16 for log10(E)  2 |Alpha| < 12 for 2  log10(E)  2.2 |Alpha| < 10 for 2.2  log10(E)  2.4 |Alpha| < 8 for log10(E) > 2.4 • Q-factors -> MC Wobble data • Sensitivity (% CRAB, 50h) -> Real Wobble data • Gamma rate -> Real Wobble data

  31. Wobble - Qfactors

  32. Wobble - Sensitivity

  33. Wobble - Gamma Rate [evts/min]

More Related