1 / 24

Profile

11. Profile. Define line and surface profile tolerances. Apply profile tolerances to define allowable variation within a limited zone on a feature or all of a feature. Apply profile tolerances to extend all around the profile shown in a drawing view.

skyler-barnett
Télécharger la présentation

Profile

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 11 Profile

  2. Define line and surface profile tolerances. • Apply profile tolerances to define allowable variation within a limited zone on a feature or all of a feature. • Apply profile tolerances to extend all around the profile shown in a drawing view. • Complete profile tolerance specifications to achieve any of the possible levels of control. • Sketch the tolerance zone created by profile tolerance specifications.

  3. Identify profile tolerances as the means for specifying allowable variation for conical surface form, orientation, and location. • Draw a composite profile tolerance specification.

  4. Profile Specification • Line profile • Surface profile • Same feature control frame format • Different symbols • No diameter symbol for the tolerance • Applied RFS

  5. Line Profile • Control single line elements on a feature • Each element is independent of all others • Control is only parallel to the profile to which the tolerance is applied

  6. Line Profile Application

  7. Surface Profile • Control all elements on a feature • When applied to one surface on a feature of size, the size tolerance also affects the surface requirements • Simplest level of control, controls form only

  8. Surface Profile Application

  9. Limits of Application • Unless specified, applicable to entire surface • All around profile • All over profile • Defined limit

  10. Profile Application across the Feature

  11. Profile Application between Noted Limits

  12. All Around Application • Symbol is similar to welding all around • Only applies to the feature as seen in toleranced view

  13. All Over Application • Applies to all features of a part • May apply additional tolerances

  14. Profile Directions • Bidirectional profile tolerance • Centered on true profile • Unequally distributed profile tolerance • Unidirectional profile tolerance applied to more material • Unidirectional tolerance applied to less material • Unequal disposed tolerance applied to allow more or less material

  15. Achievable Levels of Control

  16. Control of Form Only • Other tolerances must establish location and orientation • Profile tolerance must not contain datum feature reference

  17. Control of Form, Orientation, Location • Surface is located by basic dimensions • Datum references included

  18. Coplanarity, Orientation, and Location • All contained in one tolerance • Profile tolerances control location, orientation, and coplanarity if the features are: • Form defined by basic dimensions • Location defined with a basic dimension • Datum references are shown

  19. Coplanarity, Orientation, and Location (Cont.)

  20. Profile Applied to Conical Surfaces

  21. Composite Profile Tolerances • Form tolerances tighter than location or orientation tolerances • Datum references in first segment constrain translational and rotational degrees of freedom • Second segment constrains only rotational

  22. Composite Profile All Around

  23. Profile and Position Tolerances Combined

  24. Composite Profile for Pattern of Features • Multiple features that form a single pattern • First segment: pattern-locating tolerance zone framework • Second segment: defines feature-relating tolerance zone framework

More Related