1 / 24

E E 2415

E E 2415. Lecture 7 Natural and Step Responses of RL and RC Circuits. Conservation of Charge (1/4). Energy transferred if v 10  v 20 Total system charge is conserved. Conservation of Charge (2/4). Initial stored energy:. At equilibrium:. Conservation of Charge (3/4). Initial Charge:.

sophie
Télécharger la présentation

E E 2415

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. E E2415 Lecture 7 Natural and Step Responses of RL and RC Circuits

  2. Conservation of Charge (1/4) • Energy transferred if v10 v20 • Total system charge is conserved

  3. Conservation of Charge (2/4) Initial stored energy: At equilibrium:

  4. Conservation of Charge (3/4) Initial Charge: Final Charge: Since

  5. Conservation of Charge (4/4) Final stored energy: Energy consumed in R:

  6. Conservation of Flux Linkage (1/3) • Energy transferred if i10 i20 • Total system flux linkage is conserved. Initial stored energy: At equilibrium:

  7. Conservation of Flux Linkage (2/3) Initial flux linkage: Final flux linkage: Since

  8. Conservation of Flux Linkage (3/3) Final stored energy: Energy consumed in R:

  9. Natural RL Response (1/2) • Inductor has initial current, io. • Switch opens at t = 0 • Inductor current can’t change instantaneously

  10. Natural RL Response (2/2) Separate the variables: Integrate: KVL: Exponential of both sides:

  11. Natural RC Response (1/2) • Capacitor has initial voltage, vo. • Switch closes at t = 0. • Capacitor voltage can’t change instantaneously KCL: Separate the variables:

  12. Natural RC Response (2/2) Integrate: Exponential of both sides:

  13. RL Step Response (1/4) • Make-before-break switch changes from position a to b at t = 0. • For t < 0, Io circulates unchanged through inductor.

  14. RL Step Response (2/4) • For t > 0, circuit is as below. • Initial value of inductor current, i, is Io. • The KVL equation provides the differential equation.

  15. RL Step Response (3/4) Solution has two parts: Steady State Response Transient Response Determine k by initial conditions:

  16. RL Step Response (4/4) • Inductor behaves as a short circuit to DC in steady state mode

  17. RC Step Response (1/3) • Switch closes at t = 0. • Capacitor has initial voltage, Vo. v-i relationship: By KVL & Ohm’s Law:

  18. RC Step Response (2/3) • Response has two parts • steady state • transient • Use initial voltage to determine transient Steady State Response Transient Response

  19. RC Step Response (3/3) • Capacitor becomes an open circuit to DC after the transient response has decayed.

  20. Unbounded Response (1/5) • Need Thévenin equivalent circuit from terminal pair connected to inductor • Let initial current = 0A in this example.

  21. Unbounded Response (2/5) Voltage divider to get vx: Then Thévenin voltage

  22. Unbounded Response (3/5) Therefore:

  23. Unbounded Response (4/5) Steady state: Transient:

  24. Unbounded Response (5/5) Use initial conditions to determine k. Complete response is unbounded:

More Related