1 / 15

Analysis of Secondary Emission Inside of a 1.3GHz Radio Frequency Electron Gun

Analysis of Secondary Emission Inside of a 1.3GHz Radio Frequency Electron Gun. Robert Inzinga Supervisor: Dr. Raymond Fliller A0 Photo Injector Lab. Outline. The RF Gun Secondary Electron Emission ASTRA Phase scans Data and Simulations. Waveguide. Primary Solenoid. Secondary Solenoid.

steven-moss
Télécharger la présentation

Analysis of Secondary Emission Inside of a 1.3GHz Radio Frequency Electron Gun

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Analysis of Secondary Emission Inside of a 1.3GHz Radio Frequency Electron Gun Robert Inzinga Supervisor: Dr. Raymond Fliller A0 Photo Injector Lab

  2. Outline • The RF Gun • Secondary Electron Emission • ASTRA • Phase scans • Data and Simulations

  3. Waveguide Primary Solenoid Secondary Solenoid Bucking Solenoid Half Cell Full Cell Faraday Cup Cs2Te Photocathode Laser RF Gun • 1.625 Cell Cavity • 1.3GHz • Pulsed Laser • Cs2Te Photocathode • Solenoid-produced Magnetic Field • Waveguide • Faraday cup

  4. Secondary Emission • Emission from any surface when a primary electron collides with the surface • Secondary emission yield, δ • Maximum yield, δmax • Impact energy at maximum yield, Ep,max • Different for various materials and surfaces, s

  5. Motivation • Impact of primary electrons can cause damage to photocathode • Believe that secondary emission feeds multipacting at the photocathode • Electrons repeatedly striking photocathode releasing secondary electrons which also impact the photocathode • Also a source of dark current coming from the RF gun

  6. ASTRA • Used for simulations • Adjustable parameters • Electric field strength • Solenoid configurations • Secondary emission • Photo emitted charge

  7. Phase Scans Secondary emission Post pulse Ideal phase for beam emission • Varying the phase of the RF cavity relative to incoming laser pulse that causes photoemission • Charge measured on faraday cup

  8. Data Overview • Varied gun gradient • 7.4MV/m – 35.4 MV/m • Solenoid Configurations • Round Beam (Ibuck=255A, Iprim=255A, Isec= 255A) • Flat Beam (I = 0, 170, 70A) • No Solenoids (I = 0, 0, 0A)

  9. Data and Simulations • Ecath = 15MV/m • Solenoid settings at I = 255, 255, 255A Simulations Pink (no secondary emission) Green (secondary emission) Data Blue

  10. Data and Simulations • Ecath = 35.4MV/m • Solenoid settings at I = 255, 255, 255A Simulations Pink (no secondary emission) Green (secondary emission) Data Blue Secondary Emission

  11. Data and Simulations • Ecath = 35.4MV/m • Solenoid Settings at I=0,170,70A Simulations Pink (no secondary emission) Green (secondary emission) Data Blue

  12. Data and Simulations • Ecath = 35.4MV/m • Solenoid Settings at I=0,0,0A Simulations Pink (no secondary emission) Green (secondary emission) Data Blue

  13. Summary • Performed phase scans at a variety of gun settings • Simulations make it possible to identify secondary emission at photocathode • Number of secondarily emitted electrons increases with smaller gun gradient • Pattern of secondary emission varied with different solenoid settings • Need to better characterize secondary emission parameters for photocathode in RF gun

  14. Analysis of Secondary Emission Inside of a 1.3GHz Radio Frequency Electron Gun Robert Inzinga Supervisor: Dr. Raymond Fliller A0 Photo Injector Lab

More Related