Lessons Learned TEIN2 and CERNET
210 likes | 231 Vues
This article discusses the routing policy lessons learned from TEIN2 and CERNET, including topics such as BGP experience, global transit, load balancing, peering, business model, performance, and symmetry.
Lessons Learned TEIN2 and CERNET
E N D
Presentation Transcript
Lessons LearnedTEIN2 and CERNET Xing Li 2007-01-22
Outline • Introduction • TEIN2 routing policy • CERNET BGP Experience • Lessons learned
Simple Case (where BGP can handle things easily) • Global transit • To tier 1 or tier 2 commodity networks • Care the aggregation • Care the load balancing • Don’t care the symmetry • Peering (no transit, except for the down streams) • To domestic ISPs (bi-literal or via IX) • Care the business model • To academic partners • Care the performance • Care the symmetry
Complicated Case (where BGP cannot handle things easily) • Global transit • To tier 1 or tier 2 commodity networks • Care the aggregation • Care the load balancing • Don’t care the symmetry • Academic transit • To multiple transit backbones within academic scope • Care the aggregation • Care the load balancing • Care the performance • Care the symmetry • Etc. • Peering (no transit, except for the down streams) • To domestic ISPs (bi-literal or via IX) • Care the business model • To academic partners • Care the performance • Care the symmetry
Two Steps to Implement the Policy • Identification • IP prefix • AS path regular expression • Community tag • Path selection • AS path (inbound and outbound) • Local-preference (outbound) • More specific (inbound)
The Principle of Routing Design for the TEIN2 network • To provide interconnection among TEIN2 partners and between TEIN2 partners and EU NRENs. • To provide back-up paths within the TEIN2 network and/or via partner networks for service resilience when possible. • To provide a flexible and transparent routing policy to TEIN2 NRENs. • To avoid being selected by GÉANT, Abilene and other R&E networks outside TEIN2 as the preferred transit network. • To minimize the adjustment of the external peers’ routing policy outside TEIN2 networks, e.g. GÉANT and APAN.
TEIN2 Routing Policy • Enable additive community tagging to mark the prefix announcements. • Adopt AS number prependingas the preferred BGP policy for TEIN2 traffic adjustment within TEIN2 backbone. • Use ingress AS number prepending for outbound traffic adjustment, including traffic from TEIN2 POP to NRENs, GÉANT and APAN. • Use egress AS number prepending for inbound traffic adjustment, including traffic from NRENs, GÉANT and APAN to TEIN2 POP. • May useLocal-Preference amendment as the last resort of mechanism for fine tuning on TEIN2 traffic over the backbone.
Internet 3 G 10G CNGI Peering Domestic Peering DRAGONTAP 12G CNGI-BJIX DRAGONLIGHT 155M 100M 1G 622M 155M 2x155M HARNET TEIN2 ASNET STARLIGHT APAN KOREN CERNET CERNET 2 CERNET Peering
CERNET Routing Policy • Outbound • Use AS number prepending if possible • Heavily useLocal-Preference • Enable additive community tagging to mark the prefixes • Inbound • Use AS number prepending if possible • Announce more specifics • Enable additive community tagging to mark the prefixes
Lessons Learned (1) • The nature of BGP is reachability • Stupid routing happen • Policy based routing makes thing very complicated • The routing and topology are very dynamic environment • The key words are: simple, open and controllability • For transit network • Simple • Open • For NRN • Simple • Controllability • Why did not include this policy before the earthquake? • Because it is a NP problem and there are many contradict requirements • Mission impossible • What should be the solution?
Lessons Learned (2) • It seems that we still need to do a lot manual BGP policy adjustment, case by case with the help of • Multi-site collaborations • Routeviews • We have to compare the routing table with the end-to-end performance matrix • dvping tool