1 / 47

NOAA Standard Drysuit Diving Outfit

NOAA Standard Drysuit Diving Outfit. Presented by the NOAA Diving Center Seattle, Washington. Global View. Introduction NOAA Standard Drysuit Diving Outfit Components Diving procedures Safety precautions Key Points Self test.

tana
Télécharger la présentation

NOAA Standard Drysuit Diving Outfit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NOAA Standard Drysuit Diving Outfit Presented by the NOAA Diving Center Seattle, Washington

  2. Global View • Introduction • NOAA Standard Drysuit Diving Outfit • Components • Diving procedures • Safety precautions • Key Points • Self test Slides with this icon have one or more embedded video clips. Using the PgDn key will allow the viewer to progress between slides and also view the videos automatically.

  3. Introduction • The NOAA standard drysuit diving outfit consists of the following primary components: • Drysuit • Buoyancy compensator device (BCD) • Diving Unlimited International Weight and Trim System (DWTS) • Scuba cylinder • Primary and secondary regulators/gauge console • This presentation is intended for those NOAA divers that have not received training in the use of drysuits with BCDs.

  4. NOAA Standard Drysuit Outfit Mask & Snorkel BCD inflator under velcro Primary regulator Shadow regulator Suit fill whip under right arm Exhaust valve Whistle BCD DWTS – right hand release Console runs under left arm Fins Knife Ankle weights

  5. NOAA Standard Drysuit Outfit‘Components’

  6. DUI Weight & Trim System • The DUI Weight & Trim System (DWTS) yellow weight ditch handles should be easily accessible • Place heaviest weights in front pouches • Distribute weights evenly on both sides

  7. Back view DWTS Positioning • The ‘X’ in back harness webbing should be positioned between shoulder blades • Weight pouches should be positioned below hips • DWTS is worn under BCD

  8. Outfit Assembly-1 • The BCD is worn in the standard configuration • The drysuit power inflator hose is connected to the LP port of first stage regulator and runs under right shoulder

  9. The drysuit inflator valve is rotated towards diver’s right side The BCD inflator hose and Shadow run over left shoulder and are secured with the Velcro strap Outfit Assembly-2

  10. Ensure that the BCD chest strap (if used) does not obstruct the drysuit inflator valve Ensure that the DWTS release handles are easily accessible Pressure gauge console hose runs under left shoulder Ensure the drysuit exhaust valve is unobstructed Outfit Assembly-3

  11. NOAA Standard Drysuit Outfit‘Diving Procedures’

  12. Weighting-1 • Initial adjustments: • Adjust weight to achieve neutral buoyancy at the surface with the drysuit and BCD vented completely • Add five pounds to compensate for air breathed from cylinder during dive • Distribute weight to achieve horizontal trim (test at depth) • Ankle weights are mandatory

  13. Weighting-2 • Final adjustments: • Hover (no swimming) at 15 fsw with 500 psi in tank • Adjust weighting and retest weight distribution

  14. Buoyancy Control • The adjustable volume of air inside the drysuit is used to control the diver’s buoyancy underwater. This allows for the diver to only have to vent one source of air in an emergency uncontrolled ascent to the surface. • The BCD is used for surface floatation only, unless the drysuit becomes flooded underwater, then the BCD is used for buoyancy control.

  15. DWTS Ditching • To ditch the weights, grab a ‘yellow’ handle and pull forcefully away from your body • Hold weight pouches away from all other equipment and release • The DWTS is designed to allow the ditching of ½ the weight independently

  16. DWTS Re-weaving • At the completion of re-weaving the DWTS, ensure the free-end of the ‘yellow’ cord is tucked away. • Do not tie free ends together. • Periodically check pouches for proper assembly as cords will loosen with time.

  17. Descending-1 • Use the drysuit exhaust valve to manually vent air from the suit to allow descent • Kelp dive preferred over pike dive (air into feet) • Snort air into mask & under hood during descent to prevent external ear squeeze

  18. Descending-2 • Add just enough air to the suit to control buoyancy and to reduce the effect of suit squeeze • Should the drysuit inflation valve stick in the open position, immediately disconnect the inflation hose and abort the dive

  19. Ascending • Begin kicking to the surface • Adjust dry suit exhaust valve to release excess air and position valve at highest point • Add air in short bursts (about 2 seconds), wait for effect • Monitor ascent rate (30 fpm) and be ready to manually exhaust excess air from the suit • Once at the surface inflate BCD for surface floatation

  20. Emergency Venting • If rapidly expanding air inside the drysuit cannot be vented via the auto/manual suit exhaust valve, emergency venting procedures must be initiated immediately using either, or both of the following techniques: • Breaking the neck seal • Breaking the wrist seal

  21. Managing Excess Buoyancy-1 • Problem: Out-of-control ascent due to loss of weight belt, stuck inflator valve, or over-filling suit • Recommended corrective actions: • Try to grab hold of a stationary object (e.g., bottom, downline, piling, etc.) to buy time to take corrective action • Manually vent suit • Perform an emergency “rollout” procedure • Flare-out, spread eagle to increase drag • Because of the potential for lung barotrauma, the diver should exhale during ascent

  22. Forward roll Head down Strong kick down & around into a head up Left arm up and bent Flared position Exhale Backward roll Back arched Strong kick to head up Left arm up and bent Flared position Exhale Managing Excess Buoyancy-2

  23. Managing Loss of Buoyancy • Problem: Loss of positive buoyancy due to inability to inflate suit or flooding of suit. • Recommended corrective actions: • Use BCD to assist in swimming to surface • If BCD unavailable, even a flooded suit can be swum to the surface • Surface at normal rate and exit water (which may be difficult and may require removing or cutting and drain the suit) • Consider dropping half or all weights • Check and continue to monitor for hypothermia

  24. NOAA Standard Drysuit Outfit‘Safety Precautions’

  25. Drysuit Use a buoyancy compensation device for surface flotation and emergency back up Know your equipment and emergency procedures Practice your drysuit diving skills under controlled conditions until they become second nature Ensure your dive partner is familiar with your drysuit system Use the correct amount of insulation for the water temperature and exercise rate while diving Safety Precautions-1

  26. Drysuit Con’t. Proper weighting should allow you to make a safety stop at fifteen feet upon completion of your dive with a cylinder containing 500 psi (34 Bar) of air Check your valves, zipper and seals before each dive Perform routine preventive maintenance on drysuit and valves regularly If additional servicing is needed have it performed by a qualified repair technician only Safety Precautions-2

  27. DUI Weight & Trim System Always check to ensure that all of the weight pockets are securely closed before donning the DWTS Use right hand to release weights on right side and left hand for left side weights Do not dive with the DWTS system unless you are able to operate the release cords properly Do not thread the waist belt through the DWTS weight release handles Do not use the DWTS unless you have practiced and mastered the weight ditching procedure Safety Precautions-3

  28. DUI Weight & Trim System Con’t. Overfilling the weight pouches prevents the flaps from fully engaging the pile on the pockets and the weights will not be held securely in the pouches Always ensure there is sufficient positive buoyancy in drysuit before removing BCD while wearing the DWTS Safety Precautions-4

  29. Buoyancy Compensator Device In an emergency do not depend solely upon a BCD to lift you to the surface, be prepared to swim and even drop some or all your weights if necessary Be prepared to use the oral inflation function of the power inflator to add air to the BCD in the event the power inflator mechanism fails Never use your BCD (or drysuit) to lift heavy objects (>10lbs) underwater Do not attempt to breathe the air in the BCD due to potential contamination Safety Precautions-5

  30. Buoyancy Compensator Device Con’t. Never be weighted so heavily with your diving system that you cannot establish immediate positive buoyancy at the surface by ditching your weights Before each use, be sure to soak the cylinder bands in water before attaching the BCD to the cylinder Ensure that the BCD does not interfere with operation of the drysuit inflator valve or exhaust valve, or the weight pouch release handle of the DWTS Safety Precautions-6

  31. Key Points • The primary components of the NOAA standard drysuit diving outfit include: suit, DUI weight and trim system, BCD, scuba cylinder, and primary & secondary regulators with gauge console • The use of the above outfit requires special training • The drysuit is used for underwater buoyancy control; whereas, the BCD is used for surface floatation • Adjust weight to achieve neutral buoyancy at the surface with the drysuit & BCD vented completely • Be prepared to manage suit control problems – uncontrolled blow-ups are the most dangerous emergency situation that can occur and must be prevented

  32. NOAA Standard Drysuit Outfit‘Self Test’

  33. NOAA Standard Drysuit Outfit • QUESTION #1: A diver should adjust weight to achieve ______ buoyancy at the surface with the drysuit and BCD vented completely. • Positive • Neutral • Negative • B or D, but not A • ANSWER: B. Neutral

  34. NOAA Standard Drysuit Outfit • QUESTION #2: True or False: The heaviest weights should be placed in the rear pouches of the DUI W&TS. • True • False • ANSWER: B. False

  35. NOAA Standard Drysuit Outfit • QUESTION #3: When worn correctly, the weight pouches of the DUI W&TS should be positioned: • Above the diver’s hips • At the diver’s hip • Below the diver’s hips • Lower in the front than in the rear • ANSWER: C. Below the diver’s hips

  36. NOAA Standard Drysuit Outfit • QUESTION #4: True or False: The DUI W&TS is designed to allow the ditching of weights from either side independent of the other side. • True • False • ANSWER: A. True

  37. NOAA Standard Drysuit Outfit • QUESTION #5: True or False: When properly configured, the drysuit inflator hose is routed under the diver’s left arm. • True • False • ANSWER: B. False. It runs under the diver’s right arm

  38. NOAA Standard Drysuit Outfit • QUESTION #6: True or False: In normal operations, underwater buoyancy is controlled using the BCD; whereas surface flotation is controlled by the drysuit. • True • False • ANSWER: B. False

  39. NOAA Standard Drysuit Outfit • QUESTION #7: The maximum amount of air that should be maintained in a dry suit at depth is the minimum amount necessary to: • Prevent suit squeeze • Maintain required buoyancy • Offset loss of buoyancy from items collected underwater • Both A and B, but not C • ANSWER: D. Both A and B, but not C

  40. NOAA Standard Drysuit Outfit • QUESTION #8: True or False: The preferred surface dive to use with a dry suit is the pike dive. • True • False • ANSWER: B. False. The kelp dive is preferred

  41. NOAA Standard Drysuit Outfit • QUESTION #9: Arrange the following in order of priority. If diving in a dry suit and you feel yourself floating upward feet first, you should: • Flare out to slow the rate of ascent • Try to grab hold of something • Invert yourself and vent the suit by pulling on a seal • Invert yourself and vent the suit by using the exhaust valve • ANSWER: B, D, C, A

  42. NOAA Standard Drysuit Outfit • QUESTION #10: The amount of weight required for a specific drysuit ________. • Is directly related to the type of undergarment worn • Is not related to the type of undergarment worn • Is inversely related to the type of undergarment worn • Is the same for a ¼” wetsuit in saltwater • ANSWER: A. Is directly related to the type of undergarment worn

  43. NOAA Standard Drysuit Outfit • QUESTION #11: The most dangerous emergency situation that can occur with dry suit diving is: • A flooded suit • An uncontrolled ascent • A stuck inflator valve • A leaking exhaust valve • ANSWER: B. An uncontrolled ascent

  44. NOAA Standard Drysuit Outfit • QUESTION #12: True or False: The use of either a BCD or DUI W&TS with a drysuit is optional? • True • False • ANSWER: B. False. They are both required

  45. NOAA Standard Drysuit Outfit • QUESTION #13: The three methods of manually venting a drysuit include all of the following EXCEPT? • Depressing the exhaust valve • Disconnecting the suit inflation hose • Breaking the neck seal • Breaking the wrist seal • ANSWER: B. Disconnecting the suit inflation hose

  46. NOAA Standard Drysuit Outfit • QUESTION #14: Should the drysuit inflator valve stick in the open position, the diver should: • Disconnect the suit inflation hose and continue dive • Disconnect the suit inflation hose and terminate dive • Manually depress suit exhaust valve and terminate dive • Manually depress suit exhaust valve and continue dive • ANSWER: B. Disconnect the suit inflation hose and terminate dive

  47. NOAA Standard Drysuit Outfit • QUESTION #15: True or False: If used, the optional BCD chest strap should not interfere with operation of the drysuit inflator valve. • True • False • ANSWER: A. True (BCD chest strap is optional)

More Related