1 / 21

Beam parameters update – the resolution function

Beam parameters update – the resolution function. J. Thompson, A. Roodman SLAC 11/19/04. Beam Parameter Analysis. Goal is to measure epsilon, beta* (in y) by measuring hourglass effect: Measure beamspot width as a function of z Also measure longitudinal lumi distribution

tavia
Télécharger la présentation

Beam parameters update – the resolution function

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Beam parameters update – the resolution function J. Thompson, A. Roodman SLAC 11/19/04

  2. Beam Parameter Analysis • Goal is to measure epsilon, beta* (in y) by measuring hourglass effect: • Measure beamspot width as a function of z • Also measure longitudinal lumi distribution • First attempt (G. Schott) ran into problems • Trying to measure O(1 um) effect on 20 um resolution • Discovered resolution varies with z

  3. Two major effects were not understood: Variation with phi of predicted error on doca Variation with z (as mentioned on last page) We now know about SVT bonding type No answer for z variation Track 1 Track 2 Black  data Red  MC doca Error (cm) z (cm) z (cm)

  4. New strategy • Conclusion: Resolution as a function of detector geometry is complicated • Incorporate predicted track doca error into the fits and thus fit purely for beam width • Need a resolution function to correct predicted doca error to actual resolution; convolve it with doca PDF in final fit

  5. Resolution function • Each event has two independent tracks (no vertexing) • doca has been moved into beam coordinates • Find a function to describe distribution of doca miss distance (sum of signed docas) as a function of sqrt(sigma_doca1^2 + sigma_doca2^2)

  6. Resolution Function is the sum of 3 Gaussians: R = f1*G(mu, S1*Sigma) + f2*G(mu, S2*Sigma) + f3*G(0, const), S2>S1 Works OK?; Parameters very correlated; dependence of S1, S2 on choice of width of G3 (originally set to 250um, later adjusted to 125um) Data: f1=0.92 f2=0.08 m1=7.0e-5 S1=1.09 S2=1.94 MC: f1=0.96 f2=0.04 m1=-8.3e-5 S1=1.00 S2=2.01

  7. Resolution fit results in bins of phi and cos(theta) Better version on next page

  8. Resolution fit results in bins of phi and cos(theta)

  9. Sample resolution fits from 2 geometric bins (same theta, adjacent phi)

  10. SVT bond type largely determines doca error: Single-track doca error for all combinations of SVT bond type in layers 1 & 2 Does it affect the scale factors in resolution function widths? (Scale factors on prev slide mainly varied with phi)

  11. Bonding type combinations from prev slide combined into 4 categories Doca error (cm)  I will compare resolution function fits to events grouped into combinations of these categories for the 2 tracks in the event (so 16 fits in all)

  12. Resolution fits by bond type RR RR: f1=0.91 f2=0.09 S1=1.04 S2=2.08 SS SS: f1=0.90 f2=0.09 S1=1.11 S2=1.82 (width3 = 250um)

  13. Resolution function parameters (in data) by SVT bonding type category

  14. z (cm) • Points at each z value are the average of fits to 8 datasets (data) • Do global sigma_y fits change as we fix res function to these various sets of parameters?  eventually a systematic

  15. 3 datasets shown here in color are fits to independent sets of MC events; black is a fit to the 3 datasets combined as one Blue: 50k events in fit Red/Green: 70k events in fit Width3 = 125um -0.02cm<miss distance<0.02cm (removes almost no events) (um) Generated y width (um)

  16. Projections of miss distance and doca for a fit similar to those shown on prev page (no miss distance cut at +-0.02cm)

  17. Another test 2 attempts at floating the width3 in a high-statistics data fit: unrestricted and restricted range in miss distance (tails look bad on both of the doca distributions also)

  18. Is fit sensitive to width3 of resolution function? • Fit the same data samples repeatedly with width3 set to varying values • From left to right at each generated sigmaY: • width3 = 50um • 85um • 100um • 125um • 175um • 250um

  19. Having trouble getting a great fit for resolution function • when statistics are high, tails are hard to model • “outlier” Gaussian seems to play a role in the core • But sigma_y fit seems rather robust to changes in resolution function • Is the sigma_y fit biased at low (ie realistic) values? • Need to do more fits to MC at 2-4um • How many events are needed in a global fit? • How many events will be needed in binned fits?

  20. Next step: Test fitting in bins of z Successfully modified generator to create HG effect in y; these plots are made using MC truth sigma x sigma y 125um  ~3um z (cm)

  21. Comments • Compared to GS’s fits: • Resolution function added • Removed/marginalized some parameters (tilts w/z axis; x0,y0) • My CM2 ntuples have big improvements • beam info updates >> once per run • MC truth

More Related