1 / 6

Controller Tuning

Controller Tuning. Quarter Decay Ratio and Integral Error Tuning. Quarter Decay Ratio Response. Quarter Decay Response:. Quarter Decay Ratio Method. Field Tuning of a controller by Quarter Decay Ratio Method Uses field method to determine K cu and T u (Similar to Direct Substitution).

tawny
Télécharger la présentation

Controller Tuning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BAE 3023 Controller Tuning Quarter Decay Ratio and Integral Error Tuning

  2. Quarter Decay Ratio Response BAE 3023 • Quarter Decay Response:

  3. Quarter Decay Ratio Method BAE 3023 Field Tuning of a controller by Quarter Decay Ratio Method Uses field method to determine Kcu and Tu (Similar to Direct Substitution) • Quarter Decay Ratio Field Method • Turn OFF integral and derivative controller action • Make sure controller is in closed loop mode • Increase Kc setting until controlled variable oscillates with steady amplitude • Gain setting Kc = Kcu • Measure period as Tu • Use table 7-1.1 to find controller settings (Ziegler-Nichols)

  4. Quarter Decay Tuning by Model BAE 3023 Quarter Decay Ratio Tuning by system model • Find a first order plus dead time model for the system • Use step test or First Principals Model • Use System ID methods described earlier • Note: • For higher order overdamped systems, if one of the time constants is much longer than the others, an effective model can be formed with the time constant of a first order model equal to the longest time constant and the dead time as the sum of the remaining time constants (and dead time) • Use table 7-2.1 to determine controller settings

  5. BAE 3023 • Controller performance specification criteria • Integral of resulting error is a criteria - lower = better • IAE - Integral of absolute error • ISE - Integral of square error (emphasizes large errors) • ITAE - Integral of absolute error * time (emphasizes time) • ITSE - Integral of square error * time (emphasizes time and large errors)

  6. Minimum Error Integral Tuning BAE 3023 • Minimum Error Integral Tuning Method • Find a first order plus dead time model for the system • Use previous note for higher order overdamped systems • Select integral error criteria • Determine if optimizing for load changes or set-point changes • Use table 7-2.2 to determine controller settings for loads • Use table 7-2.3 to determine controller settings for set-points

More Related