1 / 14

Basic Assembly

Basic Assembly. Assembly Constraints. Assembly constraints are parameters that define geometric relationships between components in a CAD assembly Constraints include. Mate/Flush. Angle. Tangent. Insert. Degrees of Freedom. A component floating in space has six degrees of freedom

tbaird
Télécharger la présentation

Basic Assembly

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Basic Assembly

  2. Assembly Constraints • Assembly constraints are parameters that define geometric relationships between components in a CAD assembly • Constraints include Mate/Flush Angle Tangent Insert

  3. Degrees of Freedom • A component floating in space has six degrees of freedom • Degrees of freedom are systematically removed in an assembly until only the desired components are allowed to move 3 rotations around X, Y, and Z axes 3 translations along X, Y, and Z axes

  4. Mate Constraint • Constrains two faces, edges, points, or axes together • Red arrows represent normal vectors and point toward each other

  5. Flush Constraint • Constrains two faces or work features together • Normal vectors will point in the same direction

  6. Angle Constraint • Constrains two faces or edges at an angle to one another • Normal vectors parallel to each other equal 0° angle

  7. Insert Constraint • Constrains a cylinder flush into a hole

  8. Tangent Constraint • Constrains a curved surface to a plane or another curved surface

  9. Base Component • First component placed in an assembly should be a fundamental part or subassembly • E.g., a frame or base plate, on which the remainder of the assembly is attached • First component in an assembly file sets orientation of subsequent parts and subassemblies

  10. Grounded Component • When the first component is placed in the assembly, its origin is coincident and aligned with the assembly coordinate origin • All degrees of freedom are removed from the first component • Base component will be grounded and should be left that way

  11. Patterning Component • Function duplicates one or more components • Arranges the resulting occurrences in a circular or rectangular pattern

  12. Replace Component • Design process is often non linear, so one or more components in an assembly may need replacement • New component placed in the same location as the original component, but assembly constraints may be deleted

  13. Editing Components • Double click on a component to exit the assembly environment and enter part environment • Other components in the assembly will become translucent • When finished editing a part, exit the part environment and return to the assembly environment

  14. Subassemblies • Group of components constrained to act as one component in a larger assembly

More Related