1 / 14

Oregon DOT CORS Installations

Oregon DOT CORS Installations. Oregon Real-time GPS Network. Supporting documents. 7305only:Geodetic_Control1_ORGNProcurement ORGN_install_parts_list.xls 7305only:Geodetic_Control1_ORGNRecon and InstallationSite Install Worksheet new install worksheet in odot format.doc.

teva
Télécharger la présentation

Oregon DOT CORS Installations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Oregon DOT CORS Installations Oregon Real-time GPS Network

  2. Supporting documents • 7305only:\Geodetic_Control\1_ORGN\Procurement • ORGN_install_parts_list.xls • 7305only:\Geodetic_Control\1_ORGN\Recon and Installation\Site Install Worksheet • new install worksheet in odot format.doc

  3. SCIGN Antenna Mount, stainless steel 1-1/4" x 2" stainless nipple 2" to 1-1/4" bell reducer, galvanized Galvanized nipples, 2” diam., for building standoff Galvanized Pipe GPS Antenna Mast 2" x 84" Galvanized 90 degree Elbow 2" Cast Iron Companion Flanges 2"

  4. Galvanized Pipe GPS Antenna Mast 2" x 84" 2" to 1-1/4" bell reducer, galvanized 1-1/4" x 2" stainless nipple SCIGN Antenna Mount, stainless steel

  5. Spray threads w/ cold galvanizing compound

  6. Detail of building mounts

  7. Plumb mast w/ carpenter’s level. Magnetic Carpenter’s level, 4 ft.

  8. Apply thread sealing compound on threads.

  9. Tools to level and lock antenna to SCIGN mount.Thin hand built wrench used to tighten antenna onto the SCIGN mount.

  10. Orient SCIGN mount to North & level up.

  11. Mount antenna to SCIGN mount using thin hand built wrench.

  12. Stretch rubber tape to seal antenna cable.Drip loop at antenna cable wall entry.Cable ties on antenna cable.

  13. Completed Antenna Mount

  14. Sensor Cabinet

More Related