1 / 1

Before electropolish: Outer Diameter 90 microns, burrs on the edge

Ensuring smooth and free of burrs inner surface of configurated juncted optic channels of 2-3 mm diameters, drilled inside a massive stainless steel part. Short-Term R&D Project. Page 1 of 1 TEMPLATE TO BE REPLACED.

thane-robbins
Télécharger la présentation

Before electropolish: Outer Diameter 90 microns, burrs on the edge

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ensuring smooth and free of burrs inner surface of configurated juncted optic channels of 2-3 mm diameters, drilled inside a massive stainless steel part. Short-Term R&D Project. Page 1 of 1 TEMPLATE TO BE REPLACED Part: Stainless Steel Eye Surgery Needle, Outer Diameter 90 microns, Inner Diameter 37 microns, length 2 mm Task: To reduce Outer Diameter to 70 microns and to clean the needle edge from burrs. The aim occurred unreachable by any other methods tried . Problems: 1.To measure and to regulate the working current within the range of 2-3 microamperes 2. To handle a part of micro dimensions Solutions: 1.The current measure was carried out virtually, by calculation based on current field distribution inside the electrolyte. 2. Under microscope manipulated electro-polishing bath was installed for the purpose Results: The task was reached and tens needle were successfully treated and used in lab and clinical experiments Before electropolish: Outer Diameter 90 microns, burrs on the edge After electropolish: Outer Diameter 70 microns, no burrs

More Related